Substance Information

Data platform availability banner - infocard, search, nanomaterias

REACH Registration data can be found in the new ECHA CHEM database. The old ‘Registered substance factsheets’ will be available on this web site during the transition period but have not been updated since 19 May 2023. More

 

Substance Infocard

IC

Sulphur dioxide

Help Substance identity

The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS number and/or the molecular and structural formulas.

Some substance identifiers may have been claimed confidential, or may not have been provided, and therefore not be displayed.

EC (European Community) Number

The EC Number is the numerical identifier for substances in the EC Inventory. The EC Inventory is a combination of three independent European lists of substances from the previous EU chemicals regulatory frameworks (EINECS, ELINCS and the NLP-list). More information about the EC Inventory can be found here.

If the substance was not covered by the EC Inventory, ECHA attributes a list number in the same format, starting with the numbers 6, 7, 8 or 9.

The EC or list number is the primary substance identifier used by ECHA.

CAS (Chemical Abstract Service) registry number

The CAS number is the substance numerical identifier assigned by the Chemical Abstracts Service, a division of the American Chemical Society, to substances registered in the CAS registry database. A substance identified primarily by an EC or list number may be linked with more than one CAS number, or with CAS numbers that have been deleted. More information about CAS and the CAS registry can be found here.

Molecular formula

The molecular formula identifies each type of element by its chemical symbol and identifies the number of atoms of each element found in one discrete molecule of the substance. This information is only displayed if the substance is well–defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

Molecular structure

The molecular structure is based on structures generated from information available in ECHA’s databases. If generated, an InChI string will also be generated and made available for searching. This information is only displayed if the substance is well-defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

More help available here.

EC / List no.: 231-195-2

CAS no.: 7446-09-5

Mol. formula: O2S

formula
Help Hazard classification and labelling

The ‘Hazard classification and labelling’ section shows the hazards of a substance based on the standardised system of statements and pictograms established under the CLP (Classification Labelling and Packaging) Regulation. The CLP Regulation makes sure that the hazards presented by chemicals are clearly communicated to workers and consumers in the European Union. The CLP Regulation uses the UN Global Harmonised System (GHS) and European Union Specific Hazard Statements (EUH).

This section is based on three sources for information (harmonised classification and labelling (CLH), REACH registrations and CLP notifications). The source of the information is mentioned in the introductory sentence of the hazard statements. When information is available in all sources, the first two are displayed as a priority.

Please note:

The purpose of the information provided under this section is to highlight the substance hazardousness in a readable format. It does not represent a new labelling, classification or hazard statement, neither reflect other factors that affect the susceptibility of the effects described, such as duration of exposure or substance concentration (e.g. in case of consumer and professional uses). Other relevant information includes the following:

  • Substances may have impurities and additives that lead to different classifications. If at least one company has indicated that the substance classification is affected by impurities or additives, this will be indicated by an informative sentence. However, substance notifications in the InfoCard are aggregated independently of the impurities and additives.
  • Hazard statements were adapted to improve readability and may not correspond textually to the hazard statements codes description in the European Union Specific Hazard Statements (EUH) or the UN Global Harmonised System (GHS).

To see the full list of notified classifications and to get more information on impurities and additives relevant to classification please consult the C&L Inventory.

More information about Classification and Labelling is available in the Regulations section of ECHA website.

More help available here.

Harmonised classification and labelling (CLH)

Harmonised classification and labelling is a legally binding classification and labelling for a substance, agreed at European Community level. Harmonisation is based on the substance’s physical, toxicological and eco-toxicological hazard assessment.

The ‘Hazard classification’ and labelling section uses the signal word, pictogram(s) and hazard statements of the substance under the harmonised classification and labelling (CLH) as its primary source of information.

If the substance is covered by more than one CLH entry (e.g. disodium tetraborate EC no. 215–540–4, is covered by three harmonisations: 005–011–00–4; 005–011–01–1 and 005–011–02–9), CLH information cannot be displayed in the InfoCard as the difference between the CLH classifications requires manual interpretation or verification. If a substance is classified under multiple CLH entries, a link to the C&L Inventory is provided to allow users to view CLH information associated with the substance and no text is automatically generated for the InfoCard.

It is possible that a harmonisation is introduced through an amendment to the CLP Regulation. In that case, the ATP (Adaptation to Technical Progress) number is displayed.

More info on CLH can be found here.

Classification and labelling under REACH

If available, additional information on classification and labelling (C&L) is derived from REACH registration dossiers submitted by industry. This information has not been reviewed or verified by ECHA, and may change without prior notice. REACH registration dossiers have greater data requirements (such as supporting studies) than do notifications under CLP.

Notifications under the Classification Labelling and Packaging (CLP) Regulation

If no EU harmonised classification and labelling exists and the substance was not registered under REACH, information derived from classification and labelling (C&L) notifications to ECHA under CLP Regulation is displayed under this section. These notifications can be provided by manufacturers, importers and downstream users. ECHA maintains the C&L Inventory, but does not review or verify the accuracy of the information.

Note that for readability purposes, only the pictograms, signal words and hazard statements referred in more than 5% of the notifications under CLP are displayed.

GHS04: Gas under Pressure GHS05: Corrosive GHS08: Serious Health Hazard GHS06: Acute Toxicity

Danger! According to the harmonised classification and labelling (ATP21) approved by the European Union, this substance causes severe skin burns and eye damage, is toxic if inhaled and causes damage to organs.

Additionally, the classification provided by companies to ECHA in REACH registrations identifies that this substance contains gas under pressure and may explode if heated.

Helpful information About this substance

This section provides an overview of the calculated volume at which the substance is manufactured or imported to the European Economic Area (EU28 + Iceland, Liechtenstein and Norway). Additionally, if available, information on the use of the substance and how consumers and workers are likely to be exposed to it can also be displayed here.

The use information is displayed per substance life cycle stage (consumer use, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites or in manufacturing). The information is aggregated from the data coming from REACH substance registrations provided by industry.

For a detailed overview on identified uses and environmental releases, please consult the registered substance factsheet.

Use descriptors are adapted from ECHA guidance to improve readability and may not correspond textually to descriptor codes described in Chapter R.12: Use Descriptor system of ECHA Guidance on information requirements and chemical safety assessment.

The examples provided are generic examples and may not apply to the specific substance you are viewing. A substance may have its use restricted to certain articles or products and therefore not all the examples may apply to the specific substance. Furthermore, some substances can be found in an article, but with unlikely exposure (e.g. inside a watch) or with very low concentrations considered not to pose risks to human health or the environment.

Please note:

For readability purpose, only non-confidential use descriptors occurring in more than 5% of total occurrences are displayed.

The described Product category (i.e. the products in which the substance may be used) may refer to uses as intermediate and under controlled conditions, for which there is no consumer exposure.

More help is available here.

This substance is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 100 000 to < 1 000 000 tonnes per annum.

This substance is used in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

Consumer Uses

ECHA has no public registered data indicating whether or in which chemical products the substance might be used. ECHA has no public registered data on the routes by which this substance is most likely to be released to the environment.

Article service life

Release to the environment of this substance can occur from industrial use: formulation of mixtures, in processing aids at industrial sites, as an intermediate step in further manufacturing of another substance (use of intermediates) and as processing aid.
This substance can be found in products with material based on: leather (e.g. gloves, shoes, purses, furniture).

Widespread uses by professional workers

This substance is used in the following products: heat transfer fluids.
This substance has an industrial use resulting in manufacture of another substance (use of intermediates).
This substance is used for the manufacture of: , chemicals, rubber products and plastic products.
Release to the environment of this substance can occur from industrial use: as an intermediate step in further manufacturing of another substance (use of intermediates) and of substances in closed systems with minimal release.

Formulation or re-packing

This substance is used in the following products: pH regulators and water treatment products, paper chemicals and dyes, laboratory chemicals, water treatment chemicals, metal surface treatment products, non-metal-surface treatment products and pharmaceuticals.
This substance has an industrial use resulting in manufacture of another substance (use of intermediates).
Release to the environment of this substance can occur from industrial use: formulation of mixtures, in processing aids at industrial sites, as an intermediate step in further manufacturing of another substance (use of intermediates) and as processing aid.

Uses at industrial sites

This substance is used in the following products: pH regulators and water treatment products, paper chemicals and dyes, water treatment chemicals, metal surface treatment products, non-metal-surface treatment products and pharmaceuticals.
This substance has an industrial use resulting in manufacture of another substance (use of intermediates).
This substance is used in the following areas: formulation of mixtures and/or re-packaging.
This substance is used for the manufacture of: chemicals, metals, food products, mineral products (e.g. plasters, cement), pulp, paper and paper products and fabricated metal products.
Release to the environment of this substance can occur from industrial use: as an intermediate step in further manufacturing of another substance (use of intermediates), in processing aids at industrial sites, as processing aid and formulation of mixtures.

Manufacture

Release to the environment of this substance can occur from industrial use: manufacturing of the substance.

Help Properties of concern

The ‘Properties of concern’ section shows ECHA-assigned graphical indicators for certain substance properties that are regarded as being of relevance or importance to human health and/or the environment based on the information provided to the Agency.

Properties of concern are calculated at four "levels" of certainty:

  • "Recognised" - meaning that the concern is indicated in an official source. Recognised concerns are illustrated with a dark red icon. Sources for these are either a Harmonised C&L (CLP Regulation Annex VI) or in the Candidate list of substances of very high concern for authorisation (REACH).
  • "Potential" - again comes from official sources only. Potential concerns are illustrated with a light red icon. For (C), (M), and (R) it means that the concern is suspected in a Harmonised C&L (CLP Regulation Annex VI), as Carc. 2, Muta. 2, or Repr. 2. For (PBT) and (ED) Potential means that the concern is under assessment in the PBT or ED assessment list, and the outcome indicates a potential ED. There are no potential (Ss) or (Sr)s.
  • "Broad agreement" - comes from data submitted by industry to ECHA, and indicates that the data submitted is aligned, with >= 50% of the data submitters providing the same concern. Broad agreement concerns are illustrated with a solid outlined circle icon.
  • "Minority position" - comes from data submitted by industry to ECHA, and indicates that the data submitted is not aligned. > 5% and < 50% of the data submitters have provided the concerns indicated at this "level". Minority position concerns are illustrated with a greyed out circle icon.

The following properties of concern are calculated:

  • Carcinogenic (C) – Recognised carcinogen: comes from a harmonised C&L classifying the substance as Carc. 1A or 1B and/or an entry in the Candidate list. Potential carcinogen: comes from a harmonised C&L classifying the substance as a suspected carcinogen Carc.2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is carcinogenic. Minority position: comes from industry data where a minority of data submitters indicate the substance is carcinogenic. More information about carcinogenicity here.
  • Mutagenic (M) – Recognised mutagen: comes from a harmonised C&L classifying the substance as Muta. 1A or 1B and/or an entry in the Candidate list. Potential mutagen: comes from a harmonised C&L classifying the substance as a suspected mutagen Muta. 2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is mutagenic. Minority position: comes from industry data where a minority of data submitters indicate the substance is mutagenic. More information about mutagenicity here.
  • Toxic to Reproduction (R) – Recognised as toxic to reproduction: comes from a harmonised C&L classifying the substance as Carc. 1A or 1B and/or an entry in the Candidate list. Potentially toxic to reproduction: comes from a harmonised C&L classifying the substance as suspected toxic to reproduction Repr. 2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is toxic to reproduction. Minority position: comes from industry data where a minority of data submitters indicate the substance is toxic to reproduction. More information about reproductive toxicity here.
  • Skin sensitising (Ss) – Recognised skin sensitiser: comes from a harmonised C&L classifying the substance as Skin Sens. 1, 1A, or 1B. Broad agreement: comes from industry data where a majority of data submitters agree the substance is a skin sensitiser. Minority position: comes from industry data where a minority of data submitters indicate the substance is skin sensitising. More information about skin sensitiser here.
  • Respiratory sensitising (Sr) – Recognised respiratory sensitiser: comes from a harmonised C&L classifying the substance as Resp. Sens. 1, 1A, or 1B and/or an entry in the Candidate list. Broad agreement: comes from industry data where a majority of data submitters agree the substance is a respiratory sensitiser. Minority position: comes from industry data where a minority of data submitters indicate the substance is a respiratory sensitiser. More information about respiratory sensitiser here.
  • PBT – Recognised Persistent, bioaccumulative and toxic (PBT) (or vPvB): comes from an entry in the Candidate list. Potential PBT: is shown for substances under assessment, and comes from an entry in the PBT assessment list. Broad agreement: comes from industry data where a majority of data submitters agree the substance is PBT. Minority position: comes from industry data where a minority of data submitters indicate the substance is PBT. More information about persistent, bioaccumulative and toxic substances here.
  • ED – Recognised Endocrine Disruptor (ED): comes from an entry in the Candidate list. Potential ED: is shown for substances under assessment, and comes from an entry in the ED assessment list, if the outcome is not final and “Not ED”. At this time there is no industry submitted data taken into account to display an ED property of concern. More information about endocrine disrupting substances here.
  • POP – Recognised Persistent Organic Pollutant (POP): comes from an entry in the Annex I, II or III to the POPs Regulation and/or an entry in the Annex A, B or C to the Stockholm Convention. Under assessment as Persistent Organic Pollutant: is shown for substances that have been proposed for their inclusion in the Stockholm Convention and are under assessment, or for which a proposal is under preparation in the European Union. Note that proposals that have been set aside, either before their submission by the EU to the Convention, or by the POP Review Committee are still indicated as "Under assessment as POP".

The substance properties displayed in this section are derived from Harmonised classification and labelling (CLH) data, entries in the Candidate list of substances of very high concern for authorisation, the PBT assessment list, the ED assessment list, REACH registered dossier data and from notifications made under CLP. A prioritisation hierarchy means that data is taken from harmonised C&L data and regulatory lists first, then REACH registrations and finally from CLP notifications. By clicking on the "More details" button you can see the exact origin(s) of each Property of Concern.

Impurities or additives: When a specific critical property is calculated from industry data and where the majority of data submitters have indicated that the property relates to cases containing impurities and/or additives, then the respective critical property icon is modified with an asterisk (*).

  • ED

Under assessment as Endocrine Disrupting

More details Properties of concern - more details
Properties of concernSource(s)
  • ED

Under assessment as Endocrine Disrupting

Go to Brief Profile
Help How to use it safely

This section provides links to the list of precautions (precautionary statements) and to the guidance on safe use, if they have been provided in REACH registration dossiers.

  • Precautionary statements - describe recommended measures to minimise or prevent adverse effects resulting from exposure to a hazardous product or improper storage or handling of a hazardous product.
  • Guidance on safe use - recommendations by substance registrant on the proper use of the substance in various situations. Examples include recommended measures on fire-fighting, transport and recycling and disposal.

Please note: Precautionary measures and guidance on safe use concern the use and handling of the specific substance as such, not of the presence of the substance in other articles or mixtures. The precautionary measures and guidance on safe use are as submitted to ECHA by registrants under the REACH Regulation. Information on precautionary measures and the safe use is submitted by the registrant of a substance and the registrant is solely responsible for its accuracy and completeness.

More help available here.

about INFOCARD - Last updated: 06/07/2024 InfoCard

The InfoCard summarises the non-confidential data of a substance held in the databases of the European Chemicals Agency (ECHA). InfoCards are generated automatically based on the data available at the time of generation.

The quality and correctness of the information submitted to ECHA remains the responsibility of the data submitter. The type of uses and classifications may vary between different submissions to ECHA and for a full understanding it is recommended to consult the source data. Information on applicable regulatory frameworks is also automatically generated and may not be complete or up to date. It is the responsibility of the substance manufacturers and importers to consult official publications, e.g. the electronic edition of the Official Journal of the European Union.

InfoCards are updated when new information is available. The date of the last update corresponds to the publication date of the InfoCard and not necessarily to the date in which the update occurred in the source data.

More help available here.

Help Help

Key datasets

HELP HELP

Regulatory context

Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):

REACH - Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation
CLP - Classification, Labelling and Packaging
  • Harmonized C&L
    CLP Regulation Annex VI
    Substances for which an agreed set of classification and labelling data has been agreed at EU level by Member States.
  • Substances for which classification and labeling data have been submitted to ECHA in a registration under REACH or notified by manufacturers or importers under CLP. Such notifications are required for hazardous substances, as such or in mixtures, as well as for all substances subject to registration, regardless of their hazard.
  • Proposals for new, or updates to existing harmonised classification and labelling of substances.
BPR - Biocidal Products Regulation
Previous Legislations
  • Substances listed in the EINECS, ELINCS, or NLP inventories.
Region Legislation Long-term Exposure Limit (LTEL) Values Short-term Exposure Limit (STEL) Values Skin Designation Dermal Sensitization Respiratory Sensitization Work Sector Effective Date Expiration Date Miscellaneous Notes
mg/m3 ppm f/ml mg/m3 ppm f/ml
European Union OELs - Occupational Exposure Limits - 4th list 1.3 0.5 2.7 1.0 2
Region Legislation Emission medium Process/equipment Maximum emissions Average emissions Notes
Maximum limit Maximum sampling duration Average limit Average sampling duration
European Union Ambient Air Quality Directive 350.0 µg/m3 1.0 h Without prejudice to Annex I the criteria for 'Required proportion of valid data' shall be used for checking validity when aggregating data and calculating statistical parameters Limit value not to be exceeded more than 24 times a calendar year Already in force since 1 January 2005 Alert thresholds: To be measured over three consecutive hours at locations representative of air quality over at least 100 km2 or an entire zone or agglomeration whichever is the smaller Average Limit is the Limit Value a level fixed with the aim of avoiding preventing or reducing harmful effects on human health and/or the environment and not to be exceeded once attained
European Union Ambient Air Quality Directive 125.0 µg/m3 1.0 d Without prejudice to Annex I the criteria for 'Required proportion of valid data' shall be used for checking validity when aggregating data and calculating statistical parameters Limit value not to be exceeded more than 3 times a calendar year. Applies to Upper and lower thresholds. Already in force since 1 January 2005 The required proportion of valid data for the Limit Value referes to the percentage of the hourly averages Average Limit is the Limit Value a level fixed with the aim of avoiding preventing or reducing harmful effects on human health and/or the environment and not to be exceeded once attained
European Union Ambient Air Quality Directive 15.0 Months The averaging period referes to Calendar year and winter (1 October to 31 March) The upper and lower assessment thresholds correspond to 60% and 40% respectively of winter critical level
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using gaseous fuels with the exception of gas turbines and gas engines 5.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using gaseous fuels with the exception of gas turbines and gas engines 35.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 150.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 150.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 300.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 150.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using gaseous fuels with the exception of gas turbines and gas engines 400.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using gaseous fuels with the exception of gas turbines and gas engines 35.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants firing low calorific gases from gasification of refinery residues which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 300.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using liquid fuels with a granted permit before 27 Nov 2002 or a submitted complete application for permit before that date provided that the plant was put into operation before 27 Nov 2003 and with no more than 1500 operating h/year as a rolling average over a period of 5 years shall be subject to an emission limit for SO2 of 850 mg/Nm3 in case of plants with a total rated thermal input (TRTI) below 300 MW and of 400 mg/Nm3 in case of plants with a TRTI greater than 300 MW For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 250.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using liquid fuels with a granted permit before 27 Nov 2002 or a submitted complete application for permit before that date provided that the plant was put into operation before 27 Nov 2003 and with no more than 1500 operating h/year as a rolling average over a period of 5 years shall be subject to an emission limit for SO2 of 850 mg/Nm3 in case of plants with a total rated thermal input (TRTI) below 300 MW and of 400 mg/Nm3 in case of plants with a TRTI greater than 300 MW For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 350.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using liquid fuels with a granted permit before 27 Nov 2002 or a submitted complete application for permit before that date provided that the plant was put into operation before 27 Nov 2003 and with no more than 1500 operating h/year as a rolling average over a period of 5 years shall be subject to an emission limit for SO2 of 850 mg/Nm3 in case of plants with a total rated thermal input (TRTI) below 300 MW and of 400 mg/Nm3 in case of plants with a TRTI greater than 300 MW For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 400.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 350.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using gaseous fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants firing low calorific gases from gasification of refinery residues which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using gaseous fuels with the exception of gas turbines and gas engines 400.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants firing low calorific gases from gasification of refinery residues which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 150.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using gaseous fuels with the exception of gas turbines and gas engines 5.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants firing low calorific gases from gasification of refinery residues which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 250.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid fuels which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid fuels which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid fuels which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 250.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid fuels which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid fuels which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 300.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid fuels which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 300.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid fuels which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid fuels which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants using solid or liquid fuels with the exception of gas turbines and gas engines 400.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines Combustion plants using solid fuels which were granted a permit before 27 November 2002 or the operators of which had submitted a complete application for a permit before that date provided that the plant was put into operation no later than 27 November 2003 and which do not operate more than 1500 operating hours per year as a rolling average over a period of 5 years shall be subject to an emission limit value for SO2 of 800 mg/Nm3 For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 150.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 200.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3% Emission limit value: linear decrease from 100 to 300 MW of thermal input
European Union Industrial Emissions Directive Waste gases Installations producing titanium dioxide 6.0 kg/ton 1.0 yr Emission limit values are given in kg per tonne of titanium dioxide produced as an annual average
European Union Industrial Emissions Directive Waste gases Cement kilns co-incinerating waste 50.0 mg/Nm3 1.0 d All values are standardised at 10 % oxygen All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 200.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 350.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 200.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 300.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 400.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 200.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 200.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 200.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Waste incineration plants 200.0 mg/Nm3 0.5 h All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases.They are standardised at 11 % oxygen in waste gas except in case of incineration of mineral waste oil as defined in point 3 of Article 3 of Directive 2008/98/EC when they are standardised at 3 % oxygen and in the cases referred to in Point 2.7 of Part 6 For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Waste incineration plants 50.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases.They are standardised at 11 % oxygen in waste gas except in case of incineration of mineral waste oil as defined in point 3 of Article 3 of Directive 2008/98/EC when they are standardised at 3 % oxygen and in the cases referred to in Point 2.7 of Part 6 For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 250.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3% Emission limit value: linear decrease from 100 to 300 MW of thermal input
European Union Industrial Emissions Directive Waste gases Waste incineration plants 50.0 mg/Nm3 0.5 h All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases.They are standardised at 11 % oxygen in waste gas except in case of incineration of mineral waste oil as defined in point 3 of Article 3 of Directive 2008/98/EC when they are standardised at 3 % oxygen and in the cases referred to in Point 2.7 of Part 6 For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 400.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 200.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 200.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 300.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 250.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 300.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 200.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 150.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 200.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 200.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 350.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 3%
European Union Industrial Emissions Directive Waste gases Combustion plants co-incinerating waste 150.0 mg/Nm3 1.0 d All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6%
European Union Industrial Emissions Directive Waste gases Combustion plants using gaseous fuels with the exception of gas turbines and gas engines 200.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Multi-fuel firing combustion plants within a refinery, with the exception of gas turbines and gas engines 1000.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines See Article 40 for details on multi-fuel firing combustion plants For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
European Union Industrial Emissions Directive Waste gases Multi-fuel firing combustion plants within a refinery, with the exception of gas turbines and gas engines 600.0 mg/Nm3 All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correction for the water vapour content of the waste gases and at a standardised O2 content of 6 % for solid fuels 3 % for combustion plants other than gas turbines and gas engines using liquid and gaseous fuels and 15 % for gas turbines and gas engines See Article 40 for details on multi-fuel firing combustion plants For technical provisions regarding 'Emission monitoring' see Part 3 (Annex V). For 'Assessment of compliance with emission limit values' see Part 4 (Annex V) Directive 2010/75/EU For technical provisions regarding 'Minimum rate of desulphurisation' see Part 5 (Annex V). For 'Compliance with rate of desulphurisation' see Part 6 (Annex V) Directive 2010/75/EU
Active Implantable Medical Devices Directive-repealed
  • Active Implantable Medical Devices Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of Directive 90/385/EEC on Active Implantable Medical Devices, 20 July 1990, amended by Directive 2007/47/EC, 21 September 2007

    This list contains hazardous substances for purposes of Directive 90/385/EEC on active implantable medical devices, particularly as regards Article 3 and Annex I (Essential Requirements). This non-exhaustive database is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list). Please note that Regulation (EU) 2017/745 on medical devices has repealed Directive 90/385/EEC and begun to apply from 26 May 2021. Nevertheless, Article 120 of the Regulation provides for a transitional period allowing medical devices, under specified conditions (e.g., placed on the market prior to 26 May 2021), to continue to comply with the Directive. In accordance with the fourth paragraph of Article 120, this period ends 26 May 2025.

Ambient Air Quality Directive
  • Annexes II VII XI XII XIII XIV - Assessment Thresholds & Limit Values
    EU. Limit, Critical, Target, Long-term Values; Alert, Info. and Assessment Thresholds - Anxes II A; VII B&C; XI B; XII A&B; XIII; XIV C, D&E, Dir 2008/50/EC, amended by Dir 2015/1480/EC, 29 Aug 2015

    This list contains the Limit, Critical, Target and Long-term Values on ambient air for protection of human health and vegetation. It also contains the Alert, Information and Upper and Lower Assessment thresholds for sulphur dioxide, nitrogen dioxide, benzene, carbon monoxide, lead, PM2.5, PM10 and ozone.

CAD - Chemical Agents Directive
  • CAD - Chemical Agents Directive, Article 2(b)(i) - Hazardous Agents
    EU. Hazardous Substances - Article 2(b)(i), Directive 98/24/EC on Protection of Workers from Chemical Agent-related Risks, 5 May 1998 (Table 3 of Annex VI to CLP, as amended)

    This list contains a non-exhaustive inventory based on the list of substances with harmonised classification and labelling (i.e., Table 3 of Annex VI to the CLP Regulation 1272/2008/EC). While the harmonised list covers many hazardous substances, others not listed may also meet the classification criteria in accordance with the CLP Regulation.

Construction Products Regulation
  • Construction Product Regulation - Annex I (3) - Hazardous Substances
    EU. Hazardous Substances for Purposes of Annex I (3) (Requirements for Construction Works), Regulation 305/2011/EU on Marketing of Construction Products, amended by Regulation 574/2014/EU, 28 May 2014

    This list contains a non-exhaustive inventory of substances taken from: (1) Table 3 of Annex VI to CLP; (2) the Candidate List of SVHCs; (3) Annex XIV of REACH (Authorisation List); (4) Annex XVII of REACH (Restrictions List); (5) F-gases subject to emission limits/reporting per Regulation 517/2014/EU; and (6) volatile organic compounds (VOCs) listed in the Ambient Air Directive 2008/50/EC. The basis of the list is Annex I(3) of the Construction Products Regulation 305/2011/EC, which stipulates that construction works must not have a high impact on human health or the environment as a result of: giving off toxic gas; emissions of dangerous substances, volatile organic compounds (VOC), greenhouse gases or dangerous particles into indoor or outdoor air; release of dangerous substances into drinking water, ground water, marine waters, surface waters or soil.

  • Construction Product Regulation - Article 6(5) - SDS and Declaration
    EU. Hazardous Substances Subject to Declaration (Article 6(5)), Regulation 305/2011/EU on Marketing of Construction Products, amended by Regulation 574/2014/EU, 28 May 2014

    This list contains a non-exhaustive inventory of substances originating from: (1) Table 3 of Annex VI to CLP (i.e., the list of harmonised substances); (2) the Candidate List of Substances of Very High Concern (SVHCs); and REACH Annex XIV (Authorisation List). This list is compiled on the basis of Article 6(5) of Regulation 305/2011/EC on Marketing of Construction Products. This provision requires SDSs and information on hazardous substances (i.e., SVHCs) contained in construction products be provided with the declaration of performance.

EU Ecolabel Regulation
  • Ecolabel - Restrictions for Hazardous Substances/Mixtures
    EU. Hazardous Substances which may Preclude Goods from the Ecolabel Award as per Article 6(6) of Regulation 66/2010/EC, L 27/1, 30 January 2010

    This list contains a non-exhaustive inventory of substances based on the list of hazardous substances with harmonised classification and labelling (i.e. Table 3 of Annex VI to the CLP Regulation), and the Candidate List of substances of very high concern (SVHCs). Pursuant to Article 6(6) of the EU Ecolabel Regulation, the ecolabel must not be awarded to goods containing substances or mixtures classified according to the CLP as toxic; hazardous to the environment; and carcinogenic, mutagenic, or toxic for reproduction (CMRs). Nor are products allowed the ecolabel award when they contain SVHCs (per Article 57 of REACH). While the CLP's harmonised list contains many such substances, other ones not listed in Table 3 may also meet the criteria specified for classification under the CLP.

End-of-Life Vehicles Directive
  • End-of-Life Vehicles Directive - Hazardous Substances
    EU. Hazardous Substances per Article 2(11) of End-of-Life Vehicles Directive 2000/53/EC, 21 October 2000, amended by Directive 2020/363/EU, 5 March 2020 (based on Table 3/Annex VI of CLP)

    This list contains a non-exhaustive inventory of hazardous substances as defined by Article 2(11) of the End-of-Life Vehicles Directive 2000/53/EC. It is based on the relevant subset of substances with harmonised classification listed in Table 3 of Annex VI to the CLP Regulation 1272/2008/EC.

General Product Safety Directive
  • General Product Safety Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of General Product Safety Directive (2001/95/EC), 15 January 2002, amended by Reg 596/2009/EC, 18 July 2009

    This list contains a non-exhaustive inventory of substances that fall within the European Union's hazardous substance definitions, as provided on: (1) Table 3 of Annex VI to the CLP Regulation 1272/2008/EC; (2) Annex III of Directive 2000/54/EC (Biological Agents); Candidate List of SVHCs; and REACH Annexes XIV and XVII (Authorisation and Restriction lists). They can be considered hazardous for purposes of the General Product Safety Directive 2001/95/EC.

In Vitro Diagnostic Medical Devices Directive-repealed
  • In Vitro Diagnostic Medical Devices Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of Article 3 & Annex I (Essential Requirements), Directive 98/79/EC on In Vitro Diagnostic Medical Devices, 7 December 1998

    This list contains a non-exhaustive inventory of hazardous substances for purposes of essential requirements (Article 3 and Annex I) for general safety, design, manufacture and hazard communication of in vitro diagnostic medical devices. It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list). Note that Regulation 2017/746/EU on in vitro diagnostic medical devices was published in the EU Official Journal on 5 May 2017. With few exceptions specified in Articles 112 and 113 of this Regulation, Directive 98/79/EC is repealed, and the rules pursuant to 2017/746/EU apply, from 26 May 2022.

In Vitro Diagnostic Medical Devices Regulation
  • In Vitro Diagnostic Medical Devices Regulation - Hazardous Substances
    EU. Hazardous Substances for Purposes of Art. 5(2) and Annex I of Regulation (EU) 2017/746 on In Vitro Diagnostic Medical Devices, 5 May 2017, as corrected 27 December 2019

    This list contains a non-exhaustive inventory of hazardous substances for purposes of Regulation (EU) 2017/746, including Chap. 2 (Placing on the market and putting into service) and Annex I (General Safety and Performance Requirements). It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list).

Industrial Emissions Directive
  • IPPC - Industrial Emissions Directive, Annex II - Polluting Substances
    EU. Polluting Substances: Annex II, Directive 2010/75/EU on Industrial Emissions (IPPC), 17 December 2010

    This list contains the polluting substances for which emission limit values are assigned under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). Member States must permit all qualifying facilities in order to ensure that they minimize impact on the environment. The permit issued must provide emission limit values for pollutants on this list.

  • IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants
    EU. Emission Limit Values: Annexes V (combustion plants), VI (waste incineration/co-incineration plants), VIII (TiO2 installations), Dir. 2010/75/EU on Industrial Emissions (IPPC), 17 December 2010

    This list contains emission limit values for polluting substances in waste gases and waste water, assigned according to facility type (i.e., combustion plants (Annex V), waste incineration/co-incineration plants (Annex VI), and installations producing titanium dioxide (Annex VIII)), under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). For this list, if a substance presents 2 values in the ''Average sampling duration'' field, these indicate minimum and maximum average sampling period.

Inland Transport of Dangerous Goods Directive
  • Inland Transport of Dangerous Goods Directive, Annex I - ADR
    EU. Dangerous Goods List (ADR, Chap. 3.2, Table A), Directive 2008/68/EC, last amended by Directive 2020/1833/EU, 4 December 2020

    This list contains the ADR Dangerous Goods List, as implemented by the European Union's Directive 2008/68/EC. This Directive applies the European Agreements on the international transport of dangerous goods by road (ADR) and inland waterways (ADN), and the regulations concerning the international carriage of dangerous goods by rail (RID). Any specific CAS linked as members for substances where the list refers to finished material/article/compound/component are representative examples, but not exhaustive.

  • Inland Transport of Dangerous Goods Directive, Annex II - RID
    EU. Dangerous Goods List (RID, Chap. 3.2, Table A), Directive 2008/68/EC, last amended by Directive 2020/1833/EU, 4 December 2020

    This list contains the RID Dangerous Goods List, as implemented by the European Union's Directive 2008/68/EC. This Directive applies the European Agreements on the international transport of dangerous goods by road (ADR) and inland waterways (ADN), and the regulations concerning the international carriage of dangerous goods by rail (RID). Any specific CAS linked as members for substances where the list refers to finished material/article/compound/component are representative examples, but not exhaustive.

  • Inland Transport of Dangerous Goods Directive, Annex III - ADN
    EU. Dangerous Goods List (ADN, Chap. 3.2, Table A), Directive 2008/68/EC, last amended by Directive 2020/1833/EU, 4 December 2020

    This list contains the ADN Dangerous Goods List, as implemented by the European Union's Directive 2008/68/EC. This Directive establishes rules for the safe transport of dangerous goods between EU countries by road (ADR) and inland waterways (ADN), and the regulations concerning the international carriage of dangerous goods by rail (RID). Any specific CAS linked as members for substances where the list refers to finished material/article/compound/component are representative examples, but not exhaustive.

Marine Environmental Policy Framework Directive
  • Marine Environmental Policy Framework Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of Directive 2008/56/EC (Marine Strategy Framework Directive), 25 June 2008, amended by Directive 2017/845/EU, 18 May 2017

    This list contains a non-exhaustive inventory of hazardous substances for purposes of the Marine Strategy Framework Directive, especially as it concerns Art. 3(8), and Annexes I and III. The listed substances meet the European Union's definitions as hazardous, as provided on: (1) Table 3 of Annex VI to the CLP Regulation (1272/2008/EC); (2) Annex III of Directive 2000/54/EC (Biological Agents); Candidate List of SVHCs; and REACH Annex XIV (Authorisation List).

Medical Devices Directive-repealed
  • Medical Devices Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of Medical Devices Directive 93/42/EEC, 12 July 1993, amended by Directive 2007/47/EC, 21 September 2007

    This list contains hazardous substances in accordance with the Medical Devices Directive's (MDD) design and construction requirements pursuant to Annex I, Part II (7) & (8) (i.e., chemical, physical and biological properties; and infection and microbial contamination). Specifically, the non-exhaustive database is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list). Please note that Regulation (EU) 2017/745 on medical devices has repealed Directive 93/42/EEC and begun to apply from 26 May 2021. Nevertheless, Article 120 of the Regulation provides for a transitional period allowing medical devices, under specified conditions (e.g., placed on the market prior to 26 May 2021), to continue to comply with the Directive. In accordance with the fourth paragraph of Article 120, this period ends 26 May 2025.

Medical Devices Regulation
  • Medical Devices Regulation - Hazardous Substances
    EU. Hazardous Substances for Purposes of Medical Devices Regulation 2017/745/EU, 5 May 2017, as amended by Regulation 2020/561/EU, 24 April 2020

    This list contains hazardous substances for purposes of the Medical Devices Regulation (MDR), based on the legislation's Annex I general safety and performance requirements, including for chemical, physical and biological properties. Specifically, the non-exhaustive database is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list).

OELs - Occupational Exposure Limits - 4th list
  • Occupational Exposure Limits - 4th list - Indicative OELVs
    EU. Indicative OELVs, Directive 2017/164/EU establishing a fourth list of IOELVs pursuant to Directive 98/24/EC, and amending Directives 91/322/EEC, 2000/39/EC and 2009/161/EU, 1 February 2017

    This list contains the indicative occupational exposure limit values (IOELVs) from Commission Directive 2017/164/EU. Member States are required to bring into force the laws, regulations and administrative provisions necessary to comply with this Directive, which establishes values for reference period of eight-hour time weighted average and for a short-term period of 15 minutes. The Directive adds limit values for 27 new chemical agents, and amends 6 existing ones established by earlier directives.

Pressure Equipment Directive
  • Pressure Equipment Directive - Group 1 Fluids Hazardous Substances
    EU. Group 1 Fluids per Article 13(1)(a), Directive 2014/68/EU on Pressure Equipment, 27 June 2014

    This list contains a non-exhaustive inventory of hazardous substances based on Article 13(1)(a) of Directive 2014/68/EU, defining Group 1 fluids for purposes of classifying pressure equipment in accordance with the Directive. The list is derived from a subset of the substances with harmonised classifications, as listed on Table 3 of Annex VI to the CLP Regulation 1272/2008/EC.

Protection of Pregnant and Breastfeeding Workers Directive
  • Protection of Pregnant and Breastfeeding Workers Directive, Annex I+II
    EU. Chemical Agents: Annexes I & II, Directive 92/85/EEC on Pregnant Workers, 28 November 1992 (updated by table 3 of Annex VI to CLP, 5 October 2018)

    This list contains a non-exhaustive inventory of substances to which pregnant workers and workers who have recently given birth or are breastfeeding may not be exposed. Employers are obligated to prevent the exposure of these workers to any agents that may have adverse health effects on either mother or child. The inventory originates from Table 3 of Annex VI to the CLP.

Protection of Young People Directive
  • Physical, Biological and Chemical Agents & Processes and Work
    EU. Non-Exhaustive List of Banned Substances, Directive 94/33/EC on Young People at Work, 20 August 1994, as amended by Dir 2014/27/EU, March 5, 2014 (Based on Table 3 of Annex VI to CLP, inter alia)

    This list contains biological and chemical agents, in accordance with Art. 7 and points 2 and 3 of the Annex to Directive 94/33/EC, to which young persons (under 18 years of age) may not be exposed at the workplace. The list is a non-exhaustive inventory of such substances based on: 1) agents of risk groups 3 and 4 under Directive 2000/54/EC; 2) Table 3 of Annex VI to the CLP Regulation; 3) and Annex I of Directive 2004/37/EC.

Safety and Health of Workers at Work Directive
  • Safety and Health of Workers at Work Directive - Hazardous Substances
    EU. Hazardous Substances for Purposes of Directive 89/391/EEC, 29 June 1989, amended by Regulation 1137/2008/EC, 21 November 2008 (Table 3/Annex VI, CLP; Annex III, 2000/54/EC)

    This list contains a non-exhaustive inventory of substances that fall within the scope of the European Union's definition of hazardous chemical and biological substances, as provided on: (1) Table 3 of Annex VI to the CLP Regulation 1272/2008/EC; and (2) Annex III of Directive 2000/54/EC (Biological Agents). The EU's Occupational Safety and Health (OSH) Framework Directive 89/391/EEC applies to risks arising from chemical, physical and biological agents at the workplace.

Safety and/or Health Signs at Work Directive
  • Workplace Signs - minimum requirements & signs on containers and pipes
    EU. Workplace Signage: Annexes I and III, Directive 92/58/EEC, last amended by Directive 2014/27/EU, 5 March 2014

    This list contains hazardous substances based on Table 3 of Annex VI to the CLP Regulation 1272/2008/EC. According to the annexes to Directive 92/58/EEC, storage areas and containers containing chemical substances or mixtures that are classified as hazardous according to the CLP Regulation must be duly marked and/or labeled. Directive 92/58/EEC requires employers to ensure proper signage is posted in areas where hazards cannot be avoided or reduced.

WFD - Waste Framework Directive
  • Waste Framework Directive, Annex III - Waste - Hazardous Properties
    EU. Substances according to Hazardous Waste Properties: Annex III, Directive 2008/98/EC, 22 November 2008, amended by Directive 2018/851/EU, 14 June 2018

    This list contains substances that have been assigned hazard property (HP) waste codes 1-15, as defined in terms of the hazard class and category, hazard (H) statement, and/or concentration limits provided in Annex III of the Waste Framework Directive 2008/98/EC. The classifications of the substances listed in the list are based on their harmonised classifications per Table 3 of Annex VI to the CLP Regulation 1272/2008/EC.

Help Help

Substance names and other identifiers

Regulatory process names
Fermenicide liquid
Other
Fermenicide powder
Other
Siarki dwutlenek
Other
SO2
IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants
Sulfur dioxide
Biocidal active substances
sulfur dioxide
Other
Sulfur dioxide (SO2)
Other
Sulfur oxide (SO2)
Other
Sulfur superoxide
Other
Sulfurous acid anhydride
Other
Sulfurous anhydride
Other
Sulfurous oxide
Other
Sulphur dioxide
EC Inventory, Inland Transport of Dangerous Goods Directive, Annex I - ADR, Inland Transport of Dangerous Goods Directive, Annex II - RID, IPPC - Industrial Emissions Directive, Annex II - Polluting Substances, IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants, Occupational Exposure Limits - 4th list - Indicative OELVs, Other, CAD - Chemical Agents Directive, Art. 2(b)(i) - Hazardous Agents, Construction Product Regulation - Annex I (3) - Hazardous Substances, Construction Product Regulation - Art. 6(5) - SDS and Declaration, EU Ecolabels - Restrictions for Hazardous Substances/Mixtures, End-of-Life Vehicles Directive - Hazardous Substances, Active Implantable Medical Devices Directive - Hazardous Substances, In Vitro Diagnostic Medical Devices Directive - Hazardous Substances, In Vitro Diagnostic Medical Devices Regulation - Hazardous Substances, Marine Environmental Policy Framework Directive - Hazardous Substances, Medical Devices Directive - Hazardous Substances, Medical Devices Regulation - Hazardous Substances, Protection of Pregnant and Breastfeeding Workers Directive, Annex I+II, Pressure Equipment Directive - Group 1 Fluids Hazardous Substances, General Product Safety Directive - Hazardous Substances, Workplace Signs - minimum requirements & signs on containers and pipes, Safety and Health of Workers at Work Directive - Hazardous Substances, Waste Framework Directive, Annex III - Waste - Hazardous Properties, Fertiliser Regulation- Annex I, E.3 (chelating and complexing agents)
SULPHUR DIOXIDE
Inland Transport of Dangerous Goods Directive, Annex III - ADN, Inland Transport of Dangerous Goods Directive, Annex I - ADR, Inland Transport of Dangerous Goods Directive, Annex II - RID, IPPC - Industrial Emissions Directive, Annex II - Polluting Substances, IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants, Occupational Exposure Limits - 4th list - Indicative OELVs, Other, CAD - Chemical Agents Directive, Art. 2(b)(i) - Hazardous Agents, Construction Product Regulation - Annex I (3) - Hazardous Substances, Construction Product Regulation - Art. 6(5) - SDS and Declaration, EU Ecolabels - Restrictions for Hazardous Substances/Mixtures, End-of-Life Vehicles Directive - Hazardous Substances, Active Implantable Medical Devices Directive - Hazardous Substances, In Vitro Diagnostic Medical Devices Directive - Hazardous Substances, In Vitro Diagnostic Medical Devices Regulation - Hazardous Substances, Marine Environmental Policy Framework Directive - Hazardous Substances, Medical Devices Directive - Hazardous Substances, Medical Devices Regulation - Hazardous Substances, Protection of Pregnant and Breastfeeding Workers Directive, Annex I+II, Pressure Equipment Directive - Group 1 Fluids Hazardous Substances, General Product Safety Directive - Hazardous Substances, Workplace Signs - minimum requirements & signs on containers and pipes, Safety and Health of Workers at Work Directive - Hazardous Substances, Waste Framework Directive, Annex III - Waste - Hazardous Properties, Fertiliser Regulation- Annex I, E.3 (chelating and complexing agents)
Sulphur dioxide
Annexes II VII XI XII XIII XIV - Assessment Thresholds & Limit Values, Inland Transport of Dangerous Goods Directive, Annex I - ADR, Inland Transport of Dangerous Goods Directive, Annex II - RID, IPPC - Industrial Emissions Directive, Annex II - Polluting Substances, IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants, Occupational Exposure Limits - 4th list - Indicative OELVs, Other, CAD - Chemical Agents Directive, Art. 2(b)(i) - Hazardous Agents, Construction Product Regulation - Annex I (3) - Hazardous Substances, Construction Product Regulation - Art. 6(5) - SDS and Declaration, EU Ecolabels - Restrictions for Hazardous Substances/Mixtures, End-of-Life Vehicles Directive - Hazardous Substances, Active Implantable Medical Devices Directive - Hazardous Substances, In Vitro Diagnostic Medical Devices Directive - Hazardous Substances, In Vitro Diagnostic Medical Devices Regulation - Hazardous Substances, Marine Environmental Policy Framework Directive - Hazardous Substances, Medical Devices Directive - Hazardous Substances, Medical Devices Regulation - Hazardous Substances, Protection of Pregnant and Breastfeeding Workers Directive, Annex I+II, Pressure Equipment Directive - Group 1 Fluids Hazardous Substances, General Product Safety Directive - Hazardous Substances, Workplace Signs - minimum requirements & signs on containers and pipes, Safety and Health of Workers at Work Directive - Hazardous Substances, Waste Framework Directive, Annex III - Waste - Hazardous Properties, Fertiliser Regulation- Annex I, E.3 (chelating and complexing agents)
sulphur dioxide
Pre-Registration process, Inland Transport of Dangerous Goods Directive, Annex I - ADR, Inland Transport of Dangerous Goods Directive, Annex II - RID, IPPC - Industrial Emissions Directive, Annex II - Polluting Substances, IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants, Occupational Exposure Limits - 4th list - Indicative OELVs, Other, CAD - Chemical Agents Directive, Art. 2(b)(i) - Hazardous Agents, Construction Product Regulation - Annex I (3) - Hazardous Substances, Construction Product Regulation - Art. 6(5) - SDS and Declaration, EU Ecolabels - Restrictions for Hazardous Substances/Mixtures, End-of-Life Vehicles Directive - Hazardous Substances, Active Implantable Medical Devices Directive - Hazardous Substances, In Vitro Diagnostic Medical Devices Directive - Hazardous Substances, In Vitro Diagnostic Medical Devices Regulation - Hazardous Substances, Marine Environmental Policy Framework Directive - Hazardous Substances, Medical Devices Directive - Hazardous Substances, Medical Devices Regulation - Hazardous Substances, Protection of Pregnant and Breastfeeding Workers Directive, Annex I+II, Pressure Equipment Directive - Group 1 Fluids Hazardous Substances, General Product Safety Directive - Hazardous Substances, Workplace Signs - minimum requirements & signs on containers and pipes, Safety and Health of Workers at Work Directive - Hazardous Substances, Waste Framework Directive, Annex III - Waste - Hazardous Properties, Fertiliser Regulation- Annex I, E.3 (chelating and complexing agents)
sulphur dioxide; sulfur dioxide
C&L Inventory
Translated names
biossido di zolfo; diossido di zolfo (it)
C&L Inventory
chlorate de potassium (fr)
C&L Inventory
Diossido di zolfo (it)
Biocidal active substances
Diossidu tal-kubrit (mt)
Biocidal active substances
diossidu tal-kubrit; diossidu tal-kubrit (mt)
C&L Inventory
Dioxid de sulf (ro)
Biocidal active substances
dioxid de sulf; dioxid de sulf (ro)
C&L Inventory
Dioxyde de soufre (fr)
Biocidal active substances
ditlenek siarki; ditlenek siarki (pl)
C&L Inventory
Dióxido de azufre (es)
C&L Inventory, Biocidal active substances
Dióxido de enxofre (pt)
Biocidal active substances
dióxido de enxofre; dióxido de enxofre (pt)
C&L Inventory
Dwutlenek siarki (pl)
Biocidal active substances
Kén-dioxid (hu)
Biocidal active substances
kén-dioxid; kén-dioxid (hu)
C&L Inventory
oxid siričitý (sk)
Biocidal active substances
oxid siričitý; oxid siričitý (sk)
C&L Inventory
oxid siřičitý (cs)
Biocidal active substances
oxid siřičitý; sulfurum-dioxid (cs)
C&L Inventory
Rikkidioksidi (fi)
Biocidal active substances
rikkidioksidi; rikkidioksidi (fi)
C&L Inventory
Schwefeldioxid (de)
C&L Inventory, Biocidal active substances
Sieros dioksidas (lt)
Biocidal active substances
sieros dioksidas; sieros dioksidas (lt)
C&L Inventory
sumporov dioksid (hr)
Biocidal active substances
sumporov dioksid, sumporov dioksid (hr)
C&L Inventory
Svaveldioxid (sv)
Biocidal active substances
svaveldioxid, svaveldioxid (sv)
C&L Inventory
Svoveldioksid (no)
Biocidal active substances
svoveldioksid (no)
C&L Inventory
Svovldioxid (da)
Biocidal active substances
svovldioxid (da)
C&L Inventory
Sēra dioksīds (lv)
Biocidal active substances
sēra dioksīds; sēra dioksīds (lv)
C&L Inventory
Vääveldioksiid (et)
Biocidal active substances
vääveldioksiid (et)
C&L Inventory
Zwaveldioxide (nl)
Biocidal active substances
zwaveldioxide (nl)
C&L Inventory
Žveplov dioksid (sl)
Biocidal active substances
žveplov dioksid; žveplov dioksid (sl)
C&L Inventory
Διοξείδιο του θείου (el)
Biocidal active substances
διοξείδιο του θείου· διοξείδιο του θείου (el)
C&L Inventory
Серен диоксид (bg)
Biocidal active substances
серен диоксид; серен диоксид (bg)
C&L Inventory
IUPAC names
(oxo-lambda4-sulfanylidene)oxidane
Registration dossier, Other
(oxo-λ4-sulfanylidene)oxidane
Registration dossier
(oxo-λ⁴-sulfanylidene)oxidane
Registration dossier
Dióxido de azufre líquido (SO2)
Registration dossier
oxosulfane oxide
C&L Inventory, Registration dossier
Schwefeldioxid
C&L Inventory
SO2
Registration dossier
SULFUR DIOXIDE
C&L Inventory, Registration dossier, Other
Sulfur Dioxide
C&L Inventory, Registration dossier, Other
Sulfur dioxide
C&L Inventory, Registration dossier, Other
sulfur dioxide
C&L Inventory, Registration dossier, Other
Sulfur dioxide
Registration dossier, Other
sulfur dioxide
Registration dossier, Other
Sulfurous acid anhydride
C&L Inventory
Sulphur Dioxide
C&L Inventory
Sulphur dioxide
C&L Inventory
sulphur dioxide
C&L Inventory
Sulphur Dioxide
Registration dossier
Sulphur dioxide
Registration dossier
sulphur dioxide
Registration dossier
Sulphur dioxide water
Registration dossier
sulphur-dioxide-
C&L Inventory
Trade names
Anhídrido sulfuroso
Registration dossier
Dióxido de azufre (SO2)
Registration dossier
Dióxido de azufre líquido (SO2)
Registration dossier
Fermenticide liquid
Registration dossier
oxosulfane oxide
Registration dossier
SO2
Registration dossier
Sulfur Anhydrid
Registration dossier
Sulfur dioxide
Registration dossier
sulfur dioxide
Registration dossier
Sulfur dioxide (8CI, 9CI)
Registration dossier
Sulfur dioxide (SO2)
Registration dossier
Sulfur oxide (SO2)
Registration dossier
Sulfur superoxide (6CI)
Registration dossier
Sulfur(IV) oxide
Registration dossier
Sulfurous acid anhydride
Registration dossier
Sulfurous anhydride
Registration dossier
Sulfurous oxide
Registration dossier
Sulphur dioxide
Registration dossier
sulphur dioxide
Registration dossier
Other identifiers
016-011-00-9
C&L Inventory
Index Number
12396-99-5
Other
CAS number
1239882-82-6
Other
CAS number
590-00-1
C&L Inventory
CAS number
7446-09-5
EC Inventory, C&L Inventory, Registration dossier, Pre-Registration process, CAD - Chemical Agents Directive, Art. 2(b)(i) - Hazardous Agents, Annexes II VII XI XII XIII XIV - Assessment Thresholds & Limit Values, Construction Product Regulation - Annex I (3) - Hazardous Substances, Construction Product Regulation - Art. 6(5) - SDS and Declaration, EU Ecolabels - Restrictions for Hazardous Substances/Mixtures, End-of-Life Vehicles Directive - Hazardous Substances, Active Implantable Medical Devices Directive - Hazardous Substances, IPPC - Industrial Emissions Directive, Annex II - Polluting Substances, IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants, Inland Transport of Dangerous Goods Directive, Annex III - ADN, Inland Transport of Dangerous Goods Directive, Annex I - ADR, Inland Transport of Dangerous Goods Directive, Annex II - RID, In Vitro Diagnostic Medical Devices Directive - Hazardous Substances, In Vitro Diagnostic Medical Devices Regulation - Hazardous Substances, Occupational Exposure Limits - 4th list - Indicative OELVs, Marine Environmental Policy Framework Directive - Hazardous Substances, Medical Devices Directive - Hazardous Substances, Medical Devices Regulation - Hazardous Substances, Protection of Pregnant and Breastfeeding Workers Directive, Annex I+II, Pressure Equipment Directive - Group 1 Fluids Hazardous Substances, General Product Safety Directive - Hazardous Substances, Workplace Signs - minimum requirements & signs on containers and pipes, Safety and Health of Workers at Work Directive - Hazardous Substances, Waste Framework Directive, Annex III - Waste - Hazardous Properties, Fertiliser Regulation- Annex I, E.3 (chelating and complexing agents), Other
CAS number
8014-94-6
Other
CAS number
83008-56-4
Other
CAS number
89125-89-3
Other
CAS number