Skip to Content
Skip to Content

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. The table below will be updated at a later stage.

 

 
0226-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - LETI Pharma, S.L.U. [name of applicant in the original application: Laboratorios LETI, S.L.U. updated due to a notified change of corporate name] Use of 4-tert-OPnEO in aqueous buffers during the manufacturing process of the active pharmaceutical ingredient (Protein Q) of the veterinary vaccine LetiFend® Opinion development
0225-02 Initial 4,4'-methylenebis[2-chloroaniline] 202-918-9 101-14-4 Limburgse Urethane Castings NV Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for heavy-duty rollers, tensioner pads and spring blocks with high reliability requirements for offshore energy and renewables sectors. Opinion development
0225-01 Initial 4,4'-methylenebis[2-chloroaniline] 202-918-9 101-14-4 Limburgse Urethane Castings NV Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for custom-made rollers with high reliability requirements for steel and aluminium sectors. Opinion development
0224-01 Review report 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 EURENCO Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives. Opinion development
0223-01 Review report 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins. Opinion development
0222-01 Review report Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gruppo Colle.S.r.l. Use of Sodium dichromate as mordant in wool dyeing with dark colours. Opinion development
0221-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
U. S. Steel Košice, s.r.o. Use of Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP). Opinion development
0221-01 Initial Chromium trioxide 215-607-8 1333-82-0 U. S. Steel Košice, s.r.o. Use of Chromium (VI) Trioxide for Passivation of Electrolytic Tinplate (ETP). Opinion development
0220-02 Initial Chromium trioxide 215-607-8 1333-82-0 SRG Global Ibi, S.L. Functional chrome plating with decorative character for transportation applications. Opinion development
0220-01 Initial Chromium trioxide 215-607-8 1333-82-0 SRG Global Ibi, S.L. Chromium trioxide-based etching as pre-treatment step for electroplating of plastics for transportation applications. Opinion development
0219-01 Initial Chromium trioxide 215-607-8 1333-82-0 Husqvarna AB Industrial use of a mixture containing Chromium Trioxide in functional chrome plating of the saw chain cutter links in order to meet stay sharp and durability requirements for use with chainsaws. Opinion development
0218-02 Initial Chromium trioxide 215-607-8 1333-82-0 DOURECA - Produtos Plásticos, Lda. Industrial use of chromium trioxide to create a long-lasting and high durability chromium decorative surface on plastic substrates in the electroplating process for automotive applications. Opinion development
0218-01 Initial Chromium trioxide 215-607-8 1333-82-0 DOURECA - Produtos Plásticos, Lda. Industrial use of hexavalent chromium trioxide for a pre-treatment step (etching) in the electroplating process for automotive applications. Opinion development
0217-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes) Opinion development
0217-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes) Opinion development
0216-02 Initial Chromium trioxide 215-607-8 1333-82-0 Viega Supply Chain GmbH & Co KG Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Opinion development
0216-01 Initial Chromium trioxide 215-607-8 1333-82-0 Viega Supply Chain GmbH & Co KG Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright silvery appearance for sanitary applications Opinion development
0215-02 Initial Chromium trioxide 215-607-8 1333-82-0 Oras Oy Pre-treatment (“etching”) of plastic substrates using chromium trioxide for electroplating processes in sanitary applications Opinion development
0215-01 Initial Chromium trioxide 215-607-8 1333-82-0 Oras Oy
Oras Olesno Sp.z.o.o.
Electroplating of metal and plastic substrates using chromium trioxide to achieve functional surfaces for sanitary applications Opinion development
0214-02 Initial Chromium trioxide 215-607-8 1333-82-0 Salzgitter Flachstahl GmbH Pretex® functional chrome plating using chromium trioxide in closed reactor systems for the establishment of adjustable hemispherical surface structures on working rolls applied in the steel industry for the manufacture of cold-rolled, high quality textured sheet metal Opinion development
0214-01 Initial Chromium trioxide 215-607-8 1333-82-0 Salzgitter Flachstahl GmbH Functional chrome plating using chromium trioxide in closed reactor systems for the establishment of a ‘conventional’ hard chrome coating on working rolls applied in the steel industry for the pre-manufacturing of cold-rolled, high-quality textured sheet metal Opinion development
0213-01 Initial Chromium trioxide 215-607-8 1333-82-0 Steel Color S.p.A. Use of chromium trioxide as colouring and hardening agent for stainless steel plates Opinion development
0212-02 Initial Chromium trioxide 215-607-8 1333-82-0 LARS Chemie, spol. s r.o.
CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U.
Industrial use of chromium trioxide for the functional chrome plating with decorative character for automotive and sanitary industry Opinion development
0212-01 Initial Chromium trioxide 215-607-8 1333-82-0 LARS Chemie, spol. s r.o.
CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U.
Industrial use of chromium trioxide for the etching, pre-treatment step in the electroplating process of functional chrome plating with decorative character Opinion development
0211-02 Initial Sodium dichromate 234-190-3 10588-01-9 Tata Steel IJmuiden BV; Tata Steel UK Ltd. Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Opinions adopted
0211-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tata Steel IJmuiden BV; Tata Steel UK Ltd. Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Opinions adopted
0210-03 Initial Chromium trioxide 215-607-8 1333-82-0 C. Hübner GmbH The use of chromium trioxide in the functional electroplating of single-component (1K) and multi-component (2K/3K) plastic articles with the specific aim of obtaining a final Cr(0) coating with high durability and chemical resistance while preserving the lightweight nature of the plastic component. Opinion development
0210-02 Initial Chromium trioxide 215-607-8 1333-82-0 C. Hübner GmbH The use of chromium trioxide in the selective etching of multi-component (2K/3K) plastic articles. Opinion development
0210-01 Initial Chromium trioxide 215-607-8 1333-82-0 C. Hübner GmbH The use of chromium trioxide in the etching of single-component (1K) plastic articles. Opinion development
0209-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Aircraft Engines Industrial use of chromium trioxide-based mixtures for the surface treatment of legacy spare parts of military aircraft engines, including safety-critical parts whose failure endangers airworthiness Opinion development
0208-01 Review report Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG Industrial use of trichloroethylene as process chemical (enclosed systems) in Alcantara Material production Opinion development
0207-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Chemetall GmbH; Chemetall PLC Mixing, by Aerospace Companies and their associated supply chains, including the Applicant, of base polysulfide sealant components with NPE-containing hardener, resulting in mixtures containing < 0.1% w/w of NPE for Aerospace uses that are exempt from authorisation under REACH Art. 56(6)(a). Opinions adopted
0207-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Chemetall GmbH; Chemetall PLC The formulation of a hardener component containing NPE in Aerospace two-part polysulphide sealants. Opinions adopted
0206-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Phadia GmbH; B∙R∙A∙H∙M∙S GmbH Coating Thyroid Stimulating Hormone Receptor onto articles used as components of IVD reagent systems at B∙R∙A∙H∙M∙S GmbH and Phadia GmbH Opinion development
0206-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Phadia GmbH; Thermo Fisher Scientific Baltics UAB Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB Opinion development
0206-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Phadia GmbH; Thermo Fisher Scientific Baltics UAB Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB Opinion development
0205-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Becton Dickinson Distribution Center NV Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO)) as a processing aid in imported Diagnostics Opinion development
0204-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Biokit S.A. Professional use of 4-tert-OPnEO as a detergent during the final use of latex-based, ELISA and CLIA In-Vitro-Diagnostic kits. Opinion development
0204-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Biokit S.A. Industrial use of 4-tert-OPnEO as a detergent in the preparation of reagents for incorporation into latex-based, ELISA and CLIA In-Vitro-Diagnostic kits. Opinion development
0203-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. – OR5; Sealants Europe SAS; PPG Industries (UK) Ltd.; Boeing Distribution, Inc.; Aviall UK Inc.; Wesco Aircraft EMEA Ltd (Poland); HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] Mixing, by Aerospace and Defence Companies, and their associated supply chains, including the Applicants, of base polysulfide sealant components with OPE-containing hardener, resulting in mixtures containing < 0.1% w/w of OPE for Aerospace and Defence uses that are exempt from authorisation under REACH Art. 56(6)(a). Opinions adopted
0203-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. – OR5; Sealants Europe SAS; PPG Industries (UK) Ltd.; Boeing Distribution, Inc.; Aviall UK Inc.; Wesco Aircraft EMEA Ltd (Poland); HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] The formulation of a hardener component containing OPE in Aerospace and Defence (A&D) two-part polysulphide sealants. Opinions adopted
0202-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merckle-GmbH-Ulm The use of 4-OPnEO as an emulsifier in a silicone oil emulsion for siliconization of pre-filled syringes in a medicinal product Opinion development
0201-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A. Industrial use as a viral inactivating agent in the manufacture of two veterinary biologic drugs for treatment of osteoarthritis in cats and dogs Opinion development
0201-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A. Professional use as a surfactant in kits, kit reagents and buffer solutions in 18 veterinary In Vitro Diagnostic devices (IVDs) including one SERELISA, six ProFLOK, six WITNESS and five VetScan. The use is carried out by professional users in diagnostic laboratories and veterinary clinics to detect certain diseases in pets and farm animals Opinion development
0201-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A.; Delpharm Biotech Industrial use in formulation of kits, kit reagents and buffer solutions in two WITNESS and three SERELISA veterinary In Vitro Diagnostic devices (IVDs) used for detecting certain diseases in pets and farm animals Opinion development
0201-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A.; Delpharm Biotech Industrial use as a surfactant in a lysis buffer for the release of proteins and antigens from biological material used in the manufacture of three SERELISA veterinary In Vitro Diagnostic devices (IVDs) for detecting infectious disease in farm animals Opinion development
0200-08 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing Opinion development
0200-07 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing Opinion development
0200-06 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits with regulatory impact of the product groups sample preparation, PCR, sequencing (and immunoassay for 4-tert-OPnEO only) Opinion development
0200-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH; STAT-Dx Life S.L.; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits with regulatory impact of the product groups sample preparation, PCR, sequencing (and immunoassay for 4-tert-OPnEO only) Opinion development
0200-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Opinion development
0200-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Opinion development
0200-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Opinion development
0200-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH; STAT-Dx Life S.L. Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Opinion development
0199-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Sanquin Reagents B.V. Use of Triton™ X-100 (4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated) in formulation of components for IVD kits. Opinions adopted
0198-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Pfizer Ireland Pharmaceuticals The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of biopharmaceuticals – Post-Production Cleaning. Opinion development
0198-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Pfizer Ireland Pharmaceuticals The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of biopharmaceuticals - Viral Inactivation and associated processes. Opinion development
0197-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - MERCK MILLIPORE LIMITED Downstream use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as component of mixed cellulose ester membranes. Opinions adopted
0197-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - MERCK MILLIPORE LIMITED Industrial use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a surface-active ingredient for the production of two types of mixed cellulose ester membranes (lateral flow and microfiltration membranes). Opinions adopted
0196-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Vetter Pharma-Fertigung GmbH & Co. KG Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers (syringes and cartridges) used as primary packaging material for 44 medicinal products of several pharmaceutical companies listed in the confidential Appendix 1 to the AoA. These products cover several therapeutic areas, and approx. 40 % of them are listed on the WHO Model List of Essential Medicines (EML). Opinions adopted
0195-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - RSI ChemRep Europe Ltd (O002) OR for OraSure Technologies Inc Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as surfactant in in –vitro diagnostic device developer solution. Opinion development
0194-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Instrumentation Laboratory SpA Use as a lysing agent for red blood cells in blood analysis diagnostic device. Opinions adopted
0193-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Yposkesi Use of 4-tert-OPnEO for its non-ionic detergent properties for the cell membrane lysis and viral clearance during the development and manufacturing of viral vectors in medicinal products dedicated to human use (Investigational and Authorized Advanced Therapy Medicinal Product). Opinions adopted
0192-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Pfizer Manufacturing Belgium NV The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant within a lubricant used in the manufacture of pharmaceutical drug products. Opinions adopted
0191-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Sekisui S-lec BV Roermond Industrial use as polymer additive in the manufacture of interlayer polymer films for laminated safety glass Opinions adopted
0190-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Teva Baltics UAB The use of 4-(1,1,3,3-tetramethylbutyl)phenol ethoxylated (TritonX-100) as a nonionic surfactant for bacteria cells disruption and washing of inclusion bodies in Biological Drug Substance manufacturing process Opinions adopted
0189-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Lonza Biologics Porriño, SL.; Lonza Biologics, plc. Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated for virus inactivation via solvent/detergent treatment in the manufacture of recombinant medicinal active pharmaceutical ingredients (APIs) from mammalian cell cultures Opinions adopted
0188-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (as Triton X-100) in the assay buffer of the GSP® Neonatal GALT kit used for the semi-quantitative determination of galactose-1-phosphate uridyl transferase (GALT) activity Opinions adopted
0188-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Formulation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (as Triton X-100) for use in the assay buffer for the GSP® Neonatal GALT kit used for the semi-quantitative determination of galactose-1-phosphate uridyl transferase (GALT) activity Opinions adopted
0187-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - AGC Biologics A/S;
AGC Biologics GmbH
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as Triton X-100 as a detergent during the purification process of recombinant biopharmaceuticals derived from microbial expression hosts in projects where processes have been approved by the authorities (GMP compliant) Opinions adopted
0187-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - AGC Biologics A/S Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as Triton X-100 as detergent for the inactivation of viruses in the production of therapeutic proteins using mammalian cell hosts in projects where processes have been approved by the authorities (GMP compliant) Opinions adopted
0186-08 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Beckman Coulter Ireland Inc.; Immunotech S.R.O.; Immunotech S.A.S.; Beckman Coulter France S.A.S.; Beckman Coulter Česká republika s.r.o.; Beckman Coulter UK Ltd; Beckman Coulter S.L.U; Beckman Coulter SPA Italy; BC Distribution B.V Phase out of OPnEO-containing laboratory products from the market due to obsolescence or next generation formulations. Opinions adopted
0186-07 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Beckman Coulter Ireland Inc.; Beckman Coulter GmbH;
Beckman Coulter France S.A.S.;
Beckman Coulter Česká republika s.r.o.;
Beckman Coulter UK Ltd;
Beckman Coulter S.L.U;
Beckman Coulter SPA Italy;
BC Distribution B.V
Downstream use of NPnEO-containing laboratory products designed for use in flow cytometry, genomics and particle characterization laboratory instruments and assays for quality control and research and development. Opinions adopted
0186-06 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Beckman Coulter Ireland Inc.;
Immunotech S.R.O;
Immunotech S.A.S.;
Beckman Coulter France S.A.S.;
Beckman Coulter Česká republika s.r.o.;
Beckman Coulter UK Ltd;
Beckman Coulter S.L.U;
Beckman Coulter SPA Italy;
BC Distribution B.V
Downstream use of OPnEO-containing laboratory products designed for use in flow cytometry, genomics and particle characterization laboratory instruments and assays for quality control and research and development. Opinions adopted
0186-05 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Beckman Coulter Ireland Inc.;
Beckman Coulter GmbH;
Beckman Coulter France S.A.S.;
Beckman Coulter Česká republika s.r.o.;
Beckman Coulter UK Ltd;
Beckman Coulter S.L.U;
Beckman Coulter SPA Italy;
BC Distribution B.V
Downstream use of NPnEO-containing clinical laboratory products that require registration, licensing, approval and monitoring by country-based health authorities, designed for use in dedicated clinical chemistry, immunology, hematology and flow cytometry laboratory instruments and assays. Opinions adopted
0186-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Beckman Coulter Ireland Inc.;
Immunotech S.R.O.;
Beckman Coulter France S.A.S.;
Beckman Coulter Česká republika s.r.o.;
Beckman Coulter UK Ltd;
Beckman Coulter S.L.U;
Beckman Coulter SPA Italy;
BC Distribution B.V
Downstream use of OPnEO-containing clinical laboratory products that require registration, licensing, approval and monitoring by country-based health authorities, designed for use in dedicated clinical chemistry, immunology, hematology and flow cytometry laboratory instruments and assays. Opinions adopted
0186-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Beckman Coulter Ireland Inc. In-process production use of OPnEO as a washing buffer used in the coating of in vitro diagnostic immunoassay particles. Opinions adopted
0186-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Beckman Coulter Ireland Inc.;
Beckman Coulter GmbH
Formulation of NPnEO solutions in European sites for use as laboratory products. Laboratory products are used as intermediate solutions for preparation of finished laboratory products (finished goods) or in-process use. Opinions adopted
0186-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Beckman Coulter Ireland Inc.;
Immunotech S.R.O.;
Immunotech S.A.S.
Formulation of OPnEO solutions in European sites for use as laboratory products. Laboratory products are used as intermediate solutions for preparation of finished laboratory products (finished goods) or in-process use. Opinions adopted
0185-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - IDEXX EUROPE B.V. Use of 4-Nonylphenol, branched and linear, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions Opinions adopted
0185-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX EUROPE B.V.;
IDEXX Montpellier SAS
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions Opinions adopted
0185-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX Montpellier SAS Formulation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in the manufacture of sample diluents and standard solutions used in in vitro diagnostic veterinary ELISA Plate tests used for the detection of infectious diseases in livestock and poultry Opinions adopted
0185-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX Montpellier SAS Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as detergent in the technical manufacturing of in vitro diagnostic veterinary ELISA Plate tests (plate coating) to prevent the non-specific binding of unwanted macromolecules Opinions adopted
0184-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Lilly France S.A.S.; Eli Lilly Italia S.p.A. Industrial formulation (dilution) of a silicone solution containing 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated and its subsequent use as a lubricant in the manufacture of medicinal product delivery devices Opinions adopted
0183-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGAST Industrial use of 4-tert-OPnEO for its amphiphilic, surfactant and non-haemolytic properties, to create controlled hydrophilic spots on porous hydrophobic membranes (solid form) for in vitro diagnostic kits for blood testing via antigen/antibody reaction in the following product ranges: ABTest Card®, ABD PAD® and M-TRAP® cartridges for the ONYX® system. Opinions adopted
0182-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Abbott Diagnostics GmbH Professional use as a surfactant in an onboard solution (Detergent B) as an accessory to In-Vitro Diagnostic Devices (IVDs) to wash the reagent probes, the mixers and the reaction cuvettes between tests to prevent interference with the test result on ARCHITECT and Alinity automated analyser systems. Opinions adopted
0181-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DiaSorin S.p.A. Industrial use, as non-ionic surfactant, employed in the purification of antigens in in vitro diagnostics tests for infectious diseases, auto-immunity markers, bone metabolism, hepatitis and retrovirus, oncology and endocrinology. Opinions adopted
0180-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Bio-Rad Industrial use of raw material containing 4-tert-OPnEO for protein stabilization for veterinary in vitro diagnostic application Opinions adopted
0180-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Bio-Rad Industrial use of 4-tert-OPnEO for its detergent properties used for extraction, viral inactivation and purification of biological material further formulated and /or coated on articles intended for IVD applications Opinions adopted
0180-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Bio-Rad Industrial use of 4-tert-OPnEO for its non-ionic detergent property in the formulation of in vitro reagents dedicated to high-performance microbiological and immunological assays supported on microplates or magnetic particles Opinions adopted
0180-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Bio-Rad Industrial use of 4-NPnEO for its non-ionic detergent properties in view of controlling reactions and chromatography support saturation required in the production of highly specific and sensitive in vitro immunoassays dedicated to the diagnosis of viral (HIV, HCV, Dengue) and parasitic infections Opinions adopted
0180-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Bio-Rad Industrial use of 4-tert-OPnEO for its non-ionic detergent properties in view of controlling reactions and chromatography support saturation required in the production of highly specific and sensitive in vitro immunoassays dedicated to the diagnosis of viral (HIV, HCV, Dengue) and parasitic infections Opinions adopted
0179-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its non-ionic detergent properties, consisting in the filling of 4-tert-OPnEO-containing solutions into specific single-use ampoules to be included in clinical and industrial in vitro testing applications as part of the BioFire and BioFire Next Gen FA products. Opinions adopted
0178-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Baxter AG; Baxalta Belgium Manufacturing SA Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated (as a detergent) for virus inactivation via S/D (Solvent/Detergent) treatment in recombinant and plasma-derived medicinal products. Opinions adopted
0177-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Rentschler Biopharma SE Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated in a washing buffer applied during a purification step in the manufacture of the monoclonal antibody Dinutuximab beta Opinions adopted
0176-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - LFB BIOMEDICAMENTS Use as virus inactivation into the manufacture process of plasma-derived immunoglobulins. Opinions adopted
0175-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merck KGaA Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (technical grade) as raw material for the manufacturing of GMP Triton® X-100 Emprove® Expert according to IPEC standards Opinions adopted
0174-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Hospira Zagreb d.o.o., a Pfizer company The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of one biopharmaceutical protein, a biosimilar product, used to prevent infection and neutropenic fevers. Opinions adopted
0173-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products Ltd Use of OPE as detergent in the production of bead components for in-vitro diagnostic kits for an immunoassay platform Opinions adopted
0172-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Cytiva Sweden AB [name of applicant in the original application: GE Healthcare Bio-Sciences AB updated due to a notified change of corporate name] Industrial use of emulsifiers containing nonylphenols ethoxylated for the manufacture of chromatography resins used by the biopharmaceutical industry, food & beverage sector and academia Opinions adopted



Categories Display

Tagged as:

(click the tag to search for relevant content)


Route: .live1