- ECHA
- Information on Chemicals
- Adopted opinions and previous consultations on applications for authorisation
Adopted opinions and previous consultations on applications for authorisation
Adopted opinions and previous consultations on applications for authorisation
This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.
On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. The table below will be updated at a later stage.
| 0169-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Janssen Vaccines & Prevention BV Janssen Biologics B.V. | 4-tert-Octylphenol ethoxylate is used as a lysing agent for the permeabilization of the host cell membrane to release adenovirus particles used for the manufacture of vaccines. Its use allows the selective elimination of enveloped adventitious viruses and is compatible with the chemicals needed to control the host cell DNA precipitation in the next process step. | Opinions adopted | |
| 0046-02 | Initial | Strontium chromate | 232-142-6 | 7789-06-2 |
AKZO Nobel Car Refinishes B.V. Habich GmbH Henkel Global SupplyChain B.V. Indestructible Paint Ltd. Finalin GmbH Mapaero PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative] PPG Industries (UK) Ltd PPG Coatings SA Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name] | Application of paints, primers and specialty coatings containing Strontium Chromate in the construction of aerospace and aeronautical parts, including aeroplanes / helicopters, spacecraft, satellites, launchers, engines, and for the maintenance of such constructions. | Commission decided | |
| 0220-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | SRG Global Ibi, S.L. | Chromium trioxide-based etching as pre-treatment step for electroplating of plastics for transportation applications. | Opinion development | |
| 0206-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Phadia GmbH; B∙R∙A∙H∙M∙S GmbH | Coating Thyroid Stimulating Hormone Receptor onto articles used as components of IVD reagent systems at B∙R∙A∙H∙M∙S GmbH and Phadia GmbH | Opinion development | |
| 0012-08 | Initial | Lead chromate molybdate sulphate red (C.I. Pigment Red 104) | 235-759-9 | 12656-85-8 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Distribution and mixing pigment powder in an industrial environment into liquid or solid premix to colour plastic/plasticised articles for non consumer use | Commission decided | |
| 0012-07 | Initial | Lead sulfochromate yellow (C.I. Pigment Yellow 34) | 215-693-7 | 1344-37-2 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Distribution and mixing pigment powder in an industrial environment into liquid or solid premix to colour plastic/plasticised articles for non consumer use | Commission decided | |
| 0012-02 | Initial | Lead chromate molybdate sulphate red (C.I. Pigment Red 104) | 235-759-9 | 12656-85-8 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Distribution and mixing pigment powder in an industrial environment into solvent-based paints for non-consumer use | Commission decided | |
| 0012-01 | Initial | Lead sulfochromate yellow (C.I. Pigment Yellow 34) | 215-693-7 | 1344-37-2 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Distribution and mixing pigment powder in an industrial environment into solvent-based paints for non-consumer use | Commission decided | |
| 0197-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | MERCK MILLIPORE LIMITED | Downstream use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as component of mixed cellulose ester membranes. | Opinions adopted | |
| 0186-05 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - |
Beckman Coulter Ireland Inc.; Beckman Coulter GmbH; Beckman Coulter France S.A.S.; Beckman Coulter Česká republika s.r.o.; Beckman Coulter UK Ltd; Beckman Coulter S.L.U; Beckman Coulter SPA Italy; BC Distribution B.V | Downstream use of NPnEO-containing clinical laboratory products that require registration, licensing, approval and monitoring by country-based health authorities, designed for use in dedicated clinical chemistry, immunology, hematology and flow cytometry laboratory instruments and assays. | Opinions adopted | |
| 0186-07 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - |
Beckman Coulter Ireland Inc.; Beckman Coulter GmbH; Beckman Coulter France S.A.S.; Beckman Coulter Česká republika s.r.o.; Beckman Coulter UK Ltd; Beckman Coulter S.L.U; Beckman Coulter SPA Italy; BC Distribution B.V | Downstream use of NPnEO-containing laboratory products designed for use in flow cytometry, genomics and particle characterization laboratory instruments and assays for quality control and research and development. | Opinions adopted | |
| 0186-04 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
Beckman Coulter Ireland Inc.; Immunotech S.R.O.; Beckman Coulter France S.A.S.; Beckman Coulter Česká republika s.r.o.; Beckman Coulter UK Ltd; Beckman Coulter S.L.U; Beckman Coulter SPA Italy; BC Distribution B.V | Downstream use of OPnEO-containing clinical laboratory products that require registration, licensing, approval and monitoring by country-based health authorities, designed for use in dedicated clinical chemistry, immunology, hematology and flow cytometry laboratory instruments and assays. | Opinions adopted | |
| 0186-06 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
Beckman Coulter Ireland Inc.; Immunotech S.R.O; Immunotech S.A.S.; Beckman Coulter France S.A.S.; Beckman Coulter Česká republika s.r.o.; Beckman Coulter UK Ltd; Beckman Coulter S.L.U; Beckman Coulter SPA Italy; BC Distribution B.V | Downstream use of OPnEO-containing laboratory products designed for use in flow cytometry, genomics and particle characterization laboratory instruments and assays for quality control and research and development. | Opinions adopted | |
| 0133-01 | Iitital | Chromium trioxide | 215-607-8 | 1333-82-0 |
Ideal Standard - Vidima AD; Ideal Standard Produktions-GmbH; Jado Iberia-Produtos Metalurgicos Sociedade Unipessoal LDA (withdrawn) | Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications | Opinions adopted | |
| 0132-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | KEUCO GmbH & Co KG | Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications | Opinions adopted | |
| 0216-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Viega Supply Chain GmbH & Co KG | Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright silvery appearance for sanitary applications | Opinion development | |
| 0215-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Oras Oy Oras Olesno Sp.z.o.o. | Electroplating of metal and plastic substrates using chromium trioxide to achieve functional surfaces for sanitary applications | Opinion development | |
| 0216-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Viega Supply Chain GmbH & Co KG | Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes | Opinion development | |
| 0133-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Ideal Standard - Vidima AD | Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes | Opinions adopted | |
| 0132-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | KEUCO GmbH & Co KG | Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes | Opinions adopted | |
| 0095-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” | Formulation of mixtures of chromium trioxide for functional chrome plating, functional chrome plating with decorative character and surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering | Commission decided | |
| 0200-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH; STAT-Dx Life S.L. | Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0200-02 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH | Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0139-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Ortho-Clinical Diagnostics | Formulation of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) for use in the manufacture of in vitro diagnostic VITROS® products used for infectious disease screening, endocrinology, and oncology testing. | Opinions adopted | |
| 0163-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Wallac Oy | Formulation of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) into enhancement solutions and DELFIA standard and maintenance solutions used in In Vitro Diagnostic assays and RUO products as well as maintenance of instruments as a critical ingredient for detection process while measuring europium (or other lanthanide) content of the assay solution | Opinions adopted | |
| 0188-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Wallac Oy | Formulation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (as Triton X-100) for use in the assay buffer for the GSP® Neonatal GALT kit used for the semi-quantitative determination of galactose-1-phosphate uridyl transferase (GALT) activity | Opinions adopted | |
| 0185-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | IDEXX Montpellier SAS | Formulation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in the manufacture of sample diluents and standard solutions used in in vitro diagnostic veterinary ELISA Plate tests used for the detection of infectious diseases in livestock and poultry | Opinions adopted | |
| 0090-01 | Initial | Formaldehyde, oligomeric reaction products with aniline | 500-036-1 | 25214-70-4 | Polynt Composites France | Formulation of an epoxy resin hardener containing technical MDA | Commission decided | |
| 0004-01 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | DEZA a.s. | Formulation of DEHP in compounds, dry-blends and Plastisol formulations | Pending decision | |
| 0002-01 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | ARKEMA FRANCE | Formulation of DEHP in compounds, dry-blends and Plastisol formulations | Withdrawn | |
| 0003-01 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. | Formulation of DEHP in compounds, dry-blends and Plastisol formulations | Withdrawn | |
| 0011-01 | Initial | Diarsenic trioxide | 215-481-4 | 1327-53-3 | Linxens France SA | Formulation of diarsenic trioxide into a mixture | Commission decided | |
| 0013-01 | Initial | Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane |
221-695-9 247-148-4 | 3194-55-6 25637-99-4 134237-50-6 134237-51-7 134237-52-8 | INEOS Styrenics Netherlands BV INEOS Styrenics Ribecourt SAS INEOS Styrenics Wingles SAS Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna. Synthos Kralupy a.s. StyroChem Finland Oy Monotez SA RP Compounds GmbH Synbra Technology bv Sunpor Kunststoff GmbH Dunastyr Polystyrene Manufacturing C. Co. Ltd Versalis SpA Unipol Holland bv | Formulation of flame retarded expanded polystyrene (EPS) to solid unexpanded pellets using hexabromocyclododecane as the flame retardant additive (for onward use in building applications) | Authorisation expired | |
| 0118-01 | Initial | Pentazinc chromate octahydroxide | 256-418-0 | 49663-84-5 |
Boeing Distribution, Inc. [name of applicant
in the original application: Aviall Services Inc updated due to a notified change of corporate name]; Finalin GmbH | Formulation of mixture | Commission decided | |
| 0032-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
|
Formulation of mixtures | Commission decided | |
| 0045-01 | Initial | Dichromium tris(chromate) | 246-356-2 | 24613-89-6 | Henkel AG & Co. KGaA Henkel Global SupplyChain B.V. | Formulation of Mixtures | Commission decided | |
| 0121-01 | Initial | Pentazinc chromate octahydroxide | 256-418-0 | 49663-84-5 | Indestructible Paint Ltd. | Formulation of mixtures | Commission decided | |
| 0044-01 | Initial | Potassium dichromate | 231-906-6 | 7778-50-9 | Brenntag UK Ltd | Formulation of Mixtures | Commission decided | |
| 0047-01 | Initial | Potassium hydroxyoctaoxodizincatedichromate | 234-329-8 | 11103-86-9 |
PPG Industries (UK) Ltd Finalin GmbH PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative] PPG Coatings SA Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name] | Formulation of Mixtures | Commission decided | |
| 0043-01 | Initial | Sodium dichromate | 234-190-3 |
7789-12-0 10588-01-9 | Brenntag UK Ltd Henkel AG & Co. KGaA AD International BV | Formulation of Mixtures | Commission decided | |
| 0046-01 | Initial | Strontium chromate | 232-142-6 | 7789-06-2 |
AKZO Nobel Car Refinishes B.V. Habich GmbH Henkel Global SupplyChain B.V. Ramboll Belgium BVBA [application transferred from: “Indestructible Paint Ltd.” due to a notified legal entity change] Finalin GmbH Mapaero PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative] PPG Industries (UK) Ltd PPG Coatings SA Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name] | Formulation of Mixtures | Commission decided | |
| 0062-01 | Initial | Potassium dichromate | 231-906-6 | 7778-50-9 | Gentrochema BV | Formulation of mixtures of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. | Commission decided | |
| 0099-01 | Initial | Sodium chromate | 231-889-5 | 7775-11-3 |
|
Formulation of Mixtures of sodium chromate for sealing after anodizing, chemical conversion coating, pickling and etching applications by aerospace companies and their suppliers | Commission decided | |
| 0063-01 | Initial | Sodium dichromate | 234-190-3 |
7789-12-0 10588-01-9 | Gentrochema BV | Formulation of mixtures of sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films; and the electrolytic passivation of tin plated steel for the packaging industry. | Commission decided | |
| 0186-02 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - |
Beckman Coulter Ireland Inc.; Beckman Coulter GmbH | Formulation of NPnEO solutions in European sites for use as laboratory products. Laboratory products are used as intermediate solutions for preparation of finished laboratory products (finished goods) or in-process use. | Opinions adopted | |
| 0186-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
Beckman Coulter Ireland Inc.; Immunotech S.R.O.; Immunotech S.A.S. | Formulation of OPnEO solutions in European sites for use as laboratory products. Laboratory products are used as intermediate solutions for preparation of finished laboratory products (finished goods) or in-process use. | Opinions adopted | |
| 0122-01 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 |
VINYLOOP FERRARA S.p.A. | Formulation of recycled soft PVC containing DEHP in compounds and dry-blends | Withdrawn | |
| 0123-01 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 | Plastic Planet srl | Formulation of recycled soft PVC containing DEHP in compounds and dry-blends | Opinions adopted | |
| 0008-01 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl | Formulation of recycled soft PVC containing DEHP in compounds and dry-blends | Authorisation expired | |
| 0055-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
CROMOMED S.A. CRONOR S.A. Cromo Europa S.A. CHROMATLANTIQUE INDUSTRIEL VILA ELECTROQUIMICAS.A. | Functional Chrome Plating | Commission decided | |
| 0100-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | ZF Luftfahrttechnik GmbH | Functional chrome plating | Commission decided | |
| 0095-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” | Functional Chrome Plating | Commission decided | |
| 0032-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
|
Functional Chrome Plating | Commission decided | |
| 0066-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | MTU Aero Engines AG | Functional chrome plating for aerospace applications for civil and military uses, comprising coating of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components | Commission decided | |
| 0052-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Federal Mogul Burscheid GmbH | Functional chrome plating of piston rings for automotive engines as applied in the segments light vehicle petrol, light vehicle diesel, middle range diesel and heavy duty | Commission decided | |
| 0050-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Federal-Mogul Friedberg GmbH | Functional chrome plating of piston rings for two-stroke and four-stroke large bore engines as applied in the industrial sectors Construction & Industry, Power Generation, Railway and Maritime. | Commission decided | |
| 0119-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | ZF Friedrichshafen AG | Functional chrome plating of piston rods for automotive and rail applications | Commission decided | |
| 0051-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Federal-Mogul Valvetrain GmbH | Functional chrome plating of valves for the use in petrol and diesel engines for light-and heavy duty vehicles. | Commission decided | |
| 0068-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Hoogovens Court Roll Surface Technologies V.O.F. WAVEC GmbH Trattamento Cilindri Laminazione S.r.l. Walzen-Service-Center GmbH NORD CHROME SAS RHENAROLL SA Texturing Technology Limited NC POLAND Sp.z. o.o. | Functional chrome plating of work rolls used in the steel and aluminium industry. | Commission decided | |
| 0214-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Salzgitter Flachstahl GmbH | Functional chrome plating using chromium trioxide in closed reactor systems for the establishment of a ‘conventional’ hard chrome coating on working rolls applied in the steel industry for the pre-manufacturing of cold-rolled, high-quality textured sheet metal | Opinion development | |
| 0095-03 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” | Functional chrome plating with decorative character | Opinions adopted | |
| 0032-03 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
|
Functional chrome plating with decorative character | Opinions adopted | |
| 0131-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Schell GmbH & Co. KG Armaturentechnologie | Functional chrome plating with decorative character for sanitary applications | Opinions adopted | |
| 0130-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Dornbracht AG & Co. KG [name of applicant in the original application: Aloys F. Dornbracht GmbH & Co.KG updated due to a notified change of corporate name] | Functional chrome plating with decorative character for sanitary applications | Opinions adopted | |
| 0220-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | SRG Global Ibi, S.L. | Functional chrome plating with decorative character for transportation applications. | Opinion development | |
| 0053-01 | Initial | Chromic acid |
231-801-5 236-881-5 | 13530-68-2 7738-94-5 | Robert Bosch GmbH | Hard chrome plating for gasoline and diesel injection applications | Commission decided | |
| 0186-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Beckman Coulter Ireland Inc. | In-process production use of OPnEO as a washing buffer used in the coating of in vitro diagnostic immunoassay particles. | Opinions adopted | |
| 0126-01 | Initial | Dibutyl phthalate (DBP) | 201-557-4 | 84-74-2 | AVX Limited | Industrial use in the manufacture of ceramic sheets for the production of multi-layer ceramic capacitors. | Commission decided | |
| 0091-01 | Initial | Bis(2-methoxyethyl) ether | 203-924-4 | 111-96-6 | Merck KGaA | Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 | Commission decided | |
| 0012-04 | Initial | Lead chromate molybdate sulphate red (C.I. Pigment Red 104) | 235-759-9 | 12656-85-8 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Industrial application of paints on metal surfaces (such as machines vehicles, structures, signs, road furniture, coil coating etc.) | Commission decided | |
| 0012-03 | Initial | Lead sulfochromate yellow (C.I. Pigment Yellow 34) | 215-693-7 | 1344-37-2 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Industrial application of paints on metal surfaces (such as machines vehicles, structures, signs, road furniture, coil coating etc.) | Commission decided | |
| 0184-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Lilly France S.A.S.; Eli Lilly Italia S.p.A. | Industrial formulation (dilution) of a silicone solution containing 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated and its subsequent use as a lubricant in the manufacture of medicinal product delivery devices | Opinions adopted | |
| 0128-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Doosan Electro-Materials Luxembourg SARL Volta Energy Solutions Hungary Kft [name of applicant in the original application: Doosan Energy Solution Kft updated due to a notified corporate name change] | Industrial formulation of a chromium trioxide solution below 0.1% w/w concentration for the passivation of copper foil used in the manufacture of Lithium Ion Batteries (LiB) for motorised vehicles | Commission decided | |
| 0054-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Praxair Surface Technologies GmbH | Industrial spraying of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment to ensure either a low temperaturecured coating for corrosion protection, or a high temperature corrosion & oxidation resistance with reduction of surface roughness or a high temperature adhesive, for aviation, power generation machinery, Oil and Gas and marine applications. | Commission decided | |
| 0054-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Praxair Surface Technologies GmbH | Industrial spraying or brush application of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment, to ensure a high temperature corrosion & oxidation resistance, as well as anti-fouling properties or lubricity at high temperature, for automotive, aviation, power generation machinery, Oil and Gas and marine applications. | Commission decided | |
| 0021-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | Grupa Azoty S.A. | Industrial use as a process chemical in caprolactam purification | Commission decided | |
| 0077-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Eli Lilly Kinsale Limited [application transferred from original Applicant: Eli Lilly S.A. - Irish Branch due to a notified legal entity change] | Industrial use as a reaction medium and a solvating agent in mediating subsequent chemical transformation reactions leading to the manufacture of an Active Pharmaceutical Ingredient, Raloxifene Hydrochloride | Commission decided | |
| 0060-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | BASF SE | Industrial use as a recyclable solvent and extraction agent in a closed system for purification of 1,3,5-trioxane | Commission decided | |
| 0080-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 |
H&R Ölwerke Schindler GmbH
H&R Chemisch-Pharmazeutische Spezialitäten GmbH | Industrial use as a solvent and anti-solvent of the feedstock and intermediate product streams in the combined de-waxing and de-oiling of refining of petroleum vacuum distillates for the production of base oils and hard paraffin waxes | Commission decided | |
| 0078-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 |
|
Industrial use as a sulphonation swelling agent of polystyrene-divinylbenzene copolymer beads in the production of strong acid cation exchange resins | Commission decided | |
| 0201-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Zoetis Belgium S.A.; Delpharm Biotech | Industrial use as a surfactant in a lysis buffer for the release of proteins and antigens from biological material used in the manufacture of three SERELISA veterinary In Vitro Diagnostic devices (IVDs) for detecting infectious disease in farm animals | Opinion development | |
| 0167-05 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Abbott GmbH [name of applicant in the original application: Abbott GmbH & Co. KG updated due to a notified change of corporate name] | Industrial use as a surfactant in the extraction and purification of antigens for incorporation into In-Vitro Diagnostic Devices (IVDs) for clinical testing using ARCHITECT, Alinity and ABBOTT PRISM automated analyser systems. | Opinions adopted | |
| 0167-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
Abbott Ireland Abbott GmbH [name of applicant in the original application: Abbott GmbH & Co. KG updated due to a notified change of corporate name] | Industrial use as a surfactant in the formulation of In-Vitro Diagnostic Devices (IVDs) for clinical testing using ARCHITECT, Alinity and ABBOTT PRISM automated analyser systems. | Opinions adopted | |
| 0167-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Abbott Ireland | Industrial use as a surfactant in the formulation of system solutions (Pre-Trigger and Trigger), for use with In-Vitro Diagnostic Devices (IVDs) on ARCHITECT and Alinity automated analyser systems. | Opinions adopted | |
| 0145-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | BioMarin International Limited | Industrial use as a surfactant to perform viral inactivation of biological proteins in the manufacture of a biopharmaceutical Final Bulk Drug Substance (FBDS) for an Enzyme Replacement Therapy (BMN250) for the treatment of Mucopolysaccharidosis IIIB (MPS IIIB). | Opinions adopted | |
| 0145-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | BioMarin International Limited | Industrial use as a surfactant to perform viral inactivation of biological proteins in the manufacture of a biopharmaceutical Final Bulk Drug Substance (FBDS) for Gene Therapy products for the treatment of rare conditions in the human population. | Opinions adopted | |
| 0079-02 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Lanxess Deutschland GmbH | Industrial use as a swelling agent and reaction medium during the phthalimidomethylation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of anion exchange and chelating resins | Commission decided | |
| 0120-01 | Initial | 1,2-dichloroethane (EDC) | 203-458-1 | 107-06-2 | Microbeads AS | Industrial use as a swelling agent during the sulfonation reaction of crosslinked polystyrene beads in the manufacture of ion exchange resins for purification of radioactive waste | Commission decided | |
| 0079-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Lanxess Deutschland GmbH | Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins | Commission decided | |
| 0223-01 | Review report | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Lanxess Deutschland GmbH | Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins. | Opinion development | |
| 0201-04 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Zoetis Belgium S.A. | Industrial use as a viral inactivating agent in the manufacture of two veterinary biologic drugs for treatment of osteoarthritis in cats and dogs | Opinion development | |
| 0020-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | DOMO Caproleuna GmbH | Industrial use as an extraction solvent for the purification of caprolactam from caprolactam oil | Commission decided | |
| 0191-01 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Sekisui S-lec BV Roermond | Industrial use as polymer additive in the manufacture of interlayer polymer films for laminated safety glass | Opinions adopted | |
| 0024-02 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] | Industrial use as process chemical (enclosed systems) in Alcantara Material production | Commission decided | |
| 0076-02 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | BASF SE | Industrial use as solvent and crystallisation medium in the synthesis of the EU biocide flocoumafen (ISO) | Commission decided | |
| 0076-01 | Initial | 1,2-dichloroethane (EDC) | 203-458-1 | 107-06-2 | BASF SE | Industrial use as solvent and crystallisation medium in the synthesis of the EU pesticide bentazone (ISO) | Commission decided | |
| 0201-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Zoetis Belgium S.A.; Delpharm Biotech | Industrial use in formulation of kits, kit reagents and buffer solutions in two WITNESS and three SERELISA veterinary In Vitro Diagnostic devices (IVDs) used for detecting certain diseases in pets and farm animals | Opinion development | |
| 0004-02 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | DEZA a.s. | Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] | Pending decision | |
| 0003-02 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. | Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] | Withdrawn | |
| 0002-02 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | ARKEMA FRANCE | Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] | Withdrawn | |
| 0083-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | EURENCO | Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives | Commission decided | |
| 0224-01 | Review report | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | EURENCO | Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives. | Opinion development | |
| 0082-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Cytiva Sweden AB [name of applicant in the original application: GE Healthcare Bio-Sciences AB updated due to a notified change of corporate name] | Industrial use of 1,2-dichloroethane as an emulsifying solvent in the manufacture of porous particles for beaded chromatography and cell culture media. | Commission decided | |
| 0225-01 | Initial | 4,4'-methylenebis[2-chloroaniline] | 202-918-9 | 101-14-4 | Limburgse Urethane Castings NV | Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for custom-made rollers with high reliability requirements for steel and aluminium sectors. | Opinion development | |
| 0225-02 | Initial | 4,4'-methylenebis[2-chloroaniline] | 202-918-9 | 101-14-4 | Limburgse Urethane Castings NV | Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for heavy-duty rollers, tensioner pads and spring blocks with high reliability requirements for offshore energy and renewables sectors. | Opinion development | |
| 0197-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | MERCK MILLIPORE LIMITED | Industrial use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a surface-active ingredient for the production of two types of mixed cellulose ester membranes (lateral flow and microfiltration membranes). | Opinions adopted | |
| 0142-01 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | SEBIA | Industrial use of 4-NPnEO for its detergent properties in the production of buffers and reagents in view of ensuring the positioning of specific proteins necessary for the interpretation of gel electrophoresis in vitro diagnostic tests results based on the determination of isoenzymes. | Opinions adopted | |
| 0180-02 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Bio-Rad | Industrial use of 4-NPnEO for its non-ionic detergent properties in view of controlling reactions and chromatography support saturation required in the production of highly specific and sensitive in vitro immunoassays dedicated to the diagnosis of viral (HIV, HCV, Dengue) and parasitic infections | Opinions adopted | |
| 0204-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Biokit S.A. | Industrial use of 4-tert-OPnEO as a detergent in the preparation of reagents for incorporation into latex-based, ELISA and CLIA In-Vitro-Diagnostic kits. | Opinion development | |
| 0183-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | DIAGAST | Industrial use of 4-tert-OPnEO for its amphiphilic, surfactant and non-haemolytic properties, to create controlled hydrophilic spots on porous hydrophobic membranes (solid form) for in vitro diagnostic kits for blood testing via antigen/antibody reaction in the following product ranges: ABTest Card®, ABD PAD® and M-TRAP® cartridges for the ONYX® system. | Opinions adopted | |
| 0140-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | DIAGNOSTICA STAGO | Industrial use of 4-tert-OPnEO for its detergent properties in the process of cell lysing for the production of in-vitro diagnostic reagents (Asserachrom® HPIA, Asserachrom® HPIA–IgG and Asserachrom® PF4 and STA®-Néoplastine® R15 assays). | Opinions adopted | |
| 0141-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | SEBIA | Industrial use of 4-tert-OPnEO for its detergent properties in the production of electrophoresis gels in view of ensuring the positioning of specific proteins necessary for the interpretation of results of gel electrophoresis in vitro diagnostic tests. | Opinions adopted | |
| 0141-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | SEBIA | Industrial use of 4-tert-OPnEO for its detergent properties resulting in cellular lysis and protein interactions rupture and required for the production of reagents involved in the determination of proteins of interest in gel and capillary electrophoresis IVD tests. | Opinions adopted | |
| 0180-04 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Bio-Rad | Industrial use of 4-tert-OPnEO for its detergent properties used for extraction, viral inactivation and purification of biological material further formulated and /or coated on articles intended for IVD applications | Opinions adopted | |
| 0143-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | bioMérieux SA | Industrial use of 4-tert-OPnEO for its detergent properties, used for the extraction of biological material which is further formulated and intended for clinical and industrial in vitro testing applications. | Opinions adopted | |
| 0143-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | bioMérieux SA | Industrial use of 4-tert-OPnEO for its non-ionic detergent properties in the formulation of reagents for molecular clinical and industrial in vitro preparative and testing applications. | Opinions adopted | |
| 0180-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Bio-Rad | Industrial use of 4-tert-OPnEO for its non-ionic detergent properties in view of controlling reactions and chromatography support saturation required in the production of highly specific and sensitive in vitro immunoassays dedicated to the diagnosis of viral (HIV, HCV, Dengue) and parasitic infections | Opinions adopted | |
| 0179-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | bioMérieux SA | Industrial use of 4-tert-OPnEO for its non-ionic detergent properties, consisting in the filling of 4-tert-OPnEO-containing solutions into specific single-use ampoules to be included in clinical and industrial in vitro testing applications as part of the BioFire and BioFire Next Gen FA products. | Opinions adopted | |
| 0180-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Bio-Rad | Industrial use of 4-tert-OPnEO for its non-ionic detergent property in the formulation of in vitro reagents dedicated to high-performance microbiological and immunological assays supported on microplates or magnetic particles | Opinions adopted | |
| 0143-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | bioMérieux SA | Industrial use of 4-tert-OPnEO for its non-ionic detergent to control the level of non-specific reactions in the formulation of in vitro reagents for clinical and industrial in vitro testing immunoassays. | Opinions adopted | |
| 0141-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | SEBIA | Industrial use of 4-tert-OPnEO for its wetting detergent properties in the production of buffers, reagents and gel supports allowing the dissolution, the dilution and the good spreading of substrates and reagents, necessary to optimize the functioning and the sensitivity of gel electrophoresis in vitro diagnostic tests. | Opinions adopted | |
| 0140-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | DIAGNOSTICA STAGO | Industrial use of 4-tert-OPnEO in view of controlling the amount of non-specific reactions in the production of in-vitro diagnostic reagents (STA® - Liatest® D-Di assays). | Opinions adopted | |
| 0200-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH | Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0200-04 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH | Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0165-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Eli Lilly Kinsale Limited | Industrial use of a 4-tert-octylphenol ethoxylate compound, as a patient safety viral inactivation reagent in the manufacture of human medicines produced from biological systems | Opinions adopted | |
| 0065-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Safran Aircraft Engines [name of applicant in the original application: SNECMA updated due to a notified change of corporate name] | Industrial use of a chromium trioxide based surface treatment mixture applied on safety-critical rotating components of commercial and military aircraft engines, whose failure endangers airworthiness | Commission decided | |
| 0072-03 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Souriau sas | Industrial use of a mixture containing chromium trioxide for the etching of composite connectors used by industries subject to harsh environments, to mainly ensure adhesive deposit to meet the requirements of international standards. | Commission decided | |
| 0219-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Husqvarna AB | Industrial use of a mixture containing Chromium Trioxide in functional chrome plating of the saw chain cutter links in order to meet stay sharp and durability requirements for use with chainsaws. | Opinion development | |
| 0072-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Souriau sas Amphenol Limited AMPHENOL SOCAPEX ITT Cannon GmbH Connecteurs Electriques Deutsch TE UK Ltd | Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). | Commission decided | |
| 0072-04 | Initial | Potassium dichromate | 231-906-6 | 7778-50-9 |
Connecteurs Electriques Deutsch TE UK Ltd | Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). | Commission decided | |
| 0072-06 | Initial | Sodium dichromate | 234-190-3 |
10588-01-9 7789-12-0 | Souriau sas; TE UK Ltd | Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). | Commission decided | |
| 0072-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Souriau sas Amphenol Limited AMPHENOL SOCAPEX ITT Cannon GmbH TE UK Ltd | Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. | Commission decided | |
| 0072-05 | Initial | Potassium dichromate | 231-906-6 | 7778-50-9 | Connecteurs Electriques Deutsch | Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. | Commission decided | |
| 0072-07 | Initial | Sodium dichromate | 234-190-3 |
10588-01-9 7789-12-0 | Souriau sas Amphenol Limited AMPHENOL SOCAPEX | Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. | Commission decided | |
| 0057-03 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Nexter Mechanics | Industrial use of a mixture of chromium trioxide for the black colour hard chromium plating of exterior surface of steel weapon barrel designed for military use, to ensure, during the whole gun barrel service life, stealth, erosion, corrosion and high temperature resistances in the condition of uses. | Commission decided | |
| 0057-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Nexter Mechanics | Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament parts in order to ensure surface hardness, resistance to atmospheric corrosion, abrasive wear resistance and friction coefficient for parts in relative movement. | Commission decided | |
| 0057-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Nexter Mechanics | Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament steels parts which are thermomechanically stressed and in contact with oxidizing gas at high temperature, so as to ensure a thermal barrier with high melting point, resistance to wear and oxidation associated with weapons as well as resistance to impact and atmospheric corrosion. | Commission decided | |
| 0106-02 | Initial | Ammonium dichromate | 232-143-1 | 7789-09-5 | Display Technologies Limited | Industrial use of Ammonium Dichromate in the process of manufacturing Cathode Ray Tubes for head up displays intended to be used in military and civilian aircrafts | Commission decided | |
| 0106-01 | Initial | Ammonium dichromate | 232-143-1 | 7789-09-5 |
BAE Systems (Operations) Limited Qioptiq Ltd | Industrial use of Ammonium Dichromate in the process of manufacturing holographic combiners for diffractive head-up displays intended to be used in military aircrafts | Commission decided | |
| 0090-02 | Initial | Formaldehyde, oligomeric reaction products with aniline | 500-036-1 | 25214-70-4 | Polynt Composites France | Industrial use of an epoxy resin hardener containing technical MDA aimed at immobilising spent ion exchange resins in a high containment matrix | Commission decided | |
| 0059-01 | Initial | Arsenic acid | 231-901-9 | 7778-39-4 | CIRCUIT FOIL LUXEMBOURG SARL | Industrial use of arsenic acid for the treatment of copper foil used in the manufacture of Printed Circuit Board | Commission decided | |
| 0212-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
LARS Chemie, spol. s r.o. CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U. | Industrial use of chromium trioxide for the etching, pre-treatment step in the electroplating process of functional chrome plating with decorative character | Opinion development | |
| 0212-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
LARS Chemie, spol. s r.o. CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U. | Industrial use of chromium trioxide for the functional chrome plating with decorative character for automotive and sanitary industry | Opinion development | |
| 0058-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | CIRCUIT FOIL LUXEMBOURG SARL | Industrial use of chromium trioxide for the treatment of copper foil used in the manufacture of Printed Circuit Board | Commission decided | |
| 0070-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
FN HERSTAL S.A. BROWNING VIANA, FABRICA DE ARMAS E ARTIGOS DE DESPORTO SA | Industrial use of chromium trioxide in the hard chromium coating of civilian firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide a low friction coefficient as well as heat, corrosion and wear resistance properties. | Commission decided | |
| 0070-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
FN HERSTAL S.A. MANROY ENGINEERING LTD | Industrial use of chromium trioxide in the hard chromium coating of military small- and medium-caliber firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide hardness, heat resistance and thermal barrier properties, as well as corrosion resistance, adhesion and low friction properties | Commission decided | |
| 0218-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | DOURECA - Produtos Plásticos, Lda. | Industrial use of chromium trioxide to create a long-lasting and high durability chromium decorative surface on plastic substrates in the electroplating process for automotive applications. | Opinion development | |
| 0209-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Safran Aircraft Engines | Industrial use of chromium trioxide-based mixtures for the surface treatment of legacy spare parts of military aircraft engines, including safety-critical parts whose failure endangers airworthiness | Opinion development | |
| 0005-03 | Initial | Dibutyl phthalate (DBP) | 201-557-4 | 84-74-2 | DEZA a.s. | Industrial use of DBP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements | Authorisation expired | |
| 0007-02 | Initial | Dibutyl phthalate (DBP) | 201-557-4 | 84-74-2 | Roxel (UK Rocket Motors) Ltd | Industrial use of DBP in manufacture of solid propellants and motor charges for rockets and tactical missiles | Authorisation expired | |
| 0007-03 | Initial | Dibutyl phthalate (DBP) | 201-557-4 | 84-74-2 | Roxel (UK Rocket Motors) Ltd | Industrial use of DBP within a specialty paint in manufacture of motors for rockets and tactical missiles | Authorisation expired | |
| 0004-03 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | DEZA a.s. | Industrial use of DEHP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements | Pending decision | |
| 0007-01 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | Roxel (UK Rocket Motors) Ltd | Industrial use of DEHP in manufacture of solid propellants and motor charges for rockets and tactical missiles | Authorisation expired | |
| 0015-01 | Initial | Diarsenic trioxide | 215-481-4 | 1327-53-3 | Yara France | Industrial use of diarsenic trioxide as a processing aid to activate the absorption and desorption of carbon dioxide by potassium carbonate from synthesis gas formed in the production of ammonia | Authorisation expired | |
| 0011-02 | Initial | Diarsenic trioxide | 215-481-4 | 1327-53-3 | Linxens France SA | Industrial use of diarsenic trioxide as processing aid in gold electroplating | Commission decided | |
| 0010-01 | Initial | Diarsenic trioxide | 215-481-4 | 1327-53-3 | Nordenhamer Zinkhütte GmbH | Industrial use of diarsenic trioxide to produce a copper concentrate in the purification of the leaching solution in a zinc electrowinning process | Commission decided | |
| 0172-01 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Cytiva Sweden AB [name of applicant in the original application: GE Healthcare Bio-Sciences AB updated due to a notified change of corporate name] | Industrial use of emulsifiers containing nonylphenols ethoxylated for the manufacture of chromatography resins used by the biopharmaceutical industry, food & beverage sector and academia | Opinions adopted | |
| 0218-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | DOURECA - Produtos Plásticos, Lda. | Industrial use of hexavalent chromium trioxide for a pre-treatment step (etching) in the electroplating process for automotive applications. | Opinion development | |
| 0028-01 | Initial | Lead chromate | 231-846-0 | 7758-97-6 | Etienne LACROIX | Industrial use of lead chromate in manufacture of pyrotechnical delay devices contained into ammunition for naval self-protection | Commission decided | |
| 0094-01 | Initial | 2,2'-dichloro-4,4'-methylenedianiline (MOCA) | 202-918-9 | 101-14-4 | REACHLaw Ltd in its legal capacity as Only Representative of Suzhou Xiangyuan Special Fine Chemical Co., Ltd | Industrial use of MOCA as a curing agent/chain extender in cast polyurethane elastomer production | Opinions adopted | |
| 0144-01 | Initial | Pitch, coal tar, high-temp | 266-028-2 | 65996-93-2 | ArianeGroup SAS | Industrial use of pitch, coal tar, high temp. as precursor of carbon matrix in the manufacturing of thermally and thermo-mechanically highly loaded carbon/carbon parts including nozzle throats and other critical carbon-carbon composite parts, resistant to very harsh erosion conditions, and very high temperature ranges, dedicated to high-performance civilian and military aerospace launchers. | Commission decided | |
| 0048-02 | Initial | Potassium dichromate | 231-906-6 | 7778-50-9 | SOFRADIR | Industrial use of potassium dichromate based mixture during the etching of both InSb substrate sides during the production of optoelectronic components gathering a readout and an infrared detecting circuit with the InSb technology | Commission decided | |
| 0048-01 | Initial | Potassium dichromate | 231-906-6 | 7778-50-9 | SOFRADIR | Industrial use of potassium dichromate-based mixtures during the steps of initial and final etching of CZT layers during the production of opto-electronic components gathering a readout and an infrared detecting circuit with the MCT technology | Commission decided | |
| 0180-05 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Bio-Rad | Industrial use of raw material containing 4-tert-OPnEO for protein stabilization for veterinary in vitro diagnostic application | Opinions adopted | |
| 0008-02 | Initial | Bis(2-ethylhexyl) phthalate (DEHP) | 204-211-0 | 117-81-7 | VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl | Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce PVC articles | Authorisation expired | |
| 0123-02 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 | Plastic Planet srl | Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce the following PVC articles: (1) articles used outside of the interior space in applications in the field of construction, civil engineering, garden features such as ponds and roofing, agriculture (including horticulture) and industrial workplaces without potential for mouthing or prolonged contact with human skin or any contact with mucous membranes; (2) articles used in interior space in industrial and agricultural workplaces; or (3) footwear used in professional, industrial and/or agricultural workplaces. | Opinions adopted | |
| 0122-02 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 |
VINYLOOP FERRARA S.p.A. | Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce the following PVC articles: (1) articles used outside of the interior space in applications in the field of construction, civil engineering, garden features such as ponds and roofing, agriculture (including horticulture) and industrials workplaces without potential for mouthing or prolonged contact with human skin or any contact with mucous membranes; (2) articles used in interior space in industrial and agricultural workplaces; or (3) footwear used in professional, industrial and/or agricultural workplaces. | Withdrawn | |
| 0012-10 | Initial | Lead chromate molybdate sulphate red (C.I. Pigment Red 104) | 235-759-9 | 12656-85-8 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Industrial use of solid or liquid colour premixes and pre-compounds containing pigment to colour plastic or plasticised articles for non-consumer use | Commission decided | |
| 0012-09 | Initial | Lead sulfochromate yellow (C.I. Pigment Yellow 34) | 215-693-7 | 1344-37-2 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Industrial use of solid or liquid colour premixes and pre-compounds containing pigment to colour plastic or plasticised articles for non-consumer use | Commission decided | |
| 0158-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Swords Laboratories | Industrial use of the substance as a surfactant in the purification of the biopharmaceutical drug Orencia, used for the treatment of Rheumatoid Arthritis, Juvenile Idiopathic Arthritis and Adult Psoriatic Arthritis | Opinions adopted | |
| 0025-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | Chimcomplex S.A. Borzesti | Industrial use of trichloroethylene (TCE) as a solvent as a degreasing agent in closed systems | Authorisation expired | |
| 0208-01 | Review report | Trichloroethylene | 201-167-4 | 79-01-6 | Blue Cube Germany Assets GmbH & Co. KG | Industrial use of trichloroethylene as process chemical (enclosed systems) in Alcantara Material production | Opinion development | |
| 0181-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | DiaSorin S.p.A. | Industrial use, as non-ionic surfactant, employed in the purification of antigens in in vitro diagnostics tests for infectious diseases, auto-immunity markers, bone metabolism, hepatitis and retrovirus, oncology and endocrinology. | Opinions adopted | |
| 0057-04 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Nexter Mechanics
Nexter Systems | Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. | Commission decided | |
| 0057-05 | Initial | Dichromium tris(chromate) | 246-356-2 | 24613-89-6 | Nexter Systems | Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. | Commission decided | |
| 0013-02 | Initial | Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane |
221-695-9 247-148-4 | 3194-55-6 25637-99-4 134237-50-6 134237-51-7 134237-52-8 | INEOS Styrenics Netherlands BV INEOS Styrenics Ribecourt SAS INEOS Styrenics Wingles SAS Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna. Synthos Kralupy a.s. StyroChem Finland Oy Monotez SA RP Compounds GmbH Synbra Technology bv Sunpor Kunststoff GmbH Dunastyr Polystyrene Manufacturing C. Co. Ltd Versalis SpA Unipol Holland bv | Manufacture of flame retarded expanded polystyrene (EPS) articles for use in building applications | Authorisation expired | |
| 0203-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. – OR5; Sealants Europe SAS; PPG Industries (UK) Ltd.; Boeing Distribution, Inc.; Aviall UK Inc.; Wesco Aircraft EMEA Ltd (Poland); HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] | Mixing, by Aerospace and Defence Companies, and their associated supply chains, including the Applicants, of base polysulfide sealant components with OPE-containing hardener, resulting in mixtures containing < 0.1% w/w of OPE for Aerospace and Defence uses that are exempt from authorisation under REACH Art. 56(6)(a). | Opinions adopted | |
| 0207-02 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Chemetall GmbH; Chemetall PLC | Mixing, by Aerospace Companies and their associated supply chains, including the Applicant, of base polysulfide sealant components with NPE-containing hardener, resulting in mixtures containing < 0.1% w/w of NPE for Aerospace uses that are exempt from authorisation under REACH Art. 56(6)(a). | Opinions adopted | |
| 0032-06 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
|
Passivation of tin-plated steel (ETP) | Commission decided | |
| 0186-08 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Beckman Coulter Ireland Inc.; Immunotech S.R.O.; Immunotech S.A.S.; Beckman Coulter France S.A.S.; Beckman Coulter Česká republika s.r.o.; Beckman Coulter UK Ltd; Beckman Coulter S.L.U; Beckman Coulter SPA Italy; BC Distribution B.V | Phase out of OPnEO-containing laboratory products from the market due to obsolescence or next generation formulations. | Opinions adopted | |
| 0071-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Gerhardi Kunststofftechnik GmbH
C. Hübner GmbH SAXONIA Galvanik GmbH Simon Systems GmbH & Co. KG [name of co-applicant in the original application: Karl Simon GmbH & Co. KG updated due to a notified legal entity name change] Galvanoplast Fischer Bohemia, s.r.o. [correction of the name of the original Applicant: Fischer GmbH & Co. surface technologies KG and of the successor Applicant: Fischer Surface Technologies GmbH] Fischer Oberflächentechnologie GmbH [correction of the name of the original Applicant: Fischer GmbH & Co. surface technologies KG and of the successor Applicant: Fischer Surface Technologies GmbH] WAFA Germany GmbH Boryszew Oberflächentechnik Deutschland GmbH Bolta Werke GmbH Heinze Gruppe GmbH C+C Krug GmbH BIA Kunststoff- und Galvanotechnik GmbH & Co KG Aludec Galvanic s.a. | Plating on Plastics for Automotive Applications (PoPAA) | Opinions adopted | |
| 0215-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Oras Oy | Pre-treatment (“etching”) of plastic substrates using chromium trioxide for electroplating processes in sanitary applications | Opinion development | |
| 0214-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Salzgitter Flachstahl GmbH | Pretex® functional chrome plating using chromium trioxide in closed reactor systems for the establishment of adjustable hemispherical surface structures on working rolls applied in the steel industry for the manufacture of cold-rolled, high quality textured sheet metal | Opinion development | |
| 0200-07 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0200-08 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0200-05 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH; STAT-Dx Life S.L.; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits with regulatory impact of the product groups sample preparation, PCR, sequencing (and immunoassay for 4-tert-OPnEO only) | Opinion development | |
| 0200-06 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits with regulatory impact of the product groups sample preparation, PCR, sequencing (and immunoassay for 4-tert-OPnEO only) | Opinion development | |
| 0182-01 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Abbott Diagnostics GmbH | Professional use as a surfactant in an onboard solution (Detergent B) as an accessory to In-Vitro Diagnostic Devices (IVDs) to wash the reagent probes, the mixers and the reaction cuvettes between tests to prevent interference with the test result on ARCHITECT and Alinity automated analyser systems. | Opinions adopted | |
| 0201-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Zoetis Belgium S.A. | Professional use as a surfactant in kits, kit reagents and buffer solutions in 18 veterinary In Vitro Diagnostic devices (IVDs) including one SERELISA, six ProFLOK, six WITNESS and five VetScan. The use is carried out by professional users in diagnostic laboratories and veterinary clinics to detect certain diseases in pets and farm animals | Opinion development | |
| 0167-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
Abbott Ireland Abbott GmbH [name of applicant in the original application: Abbott GmbH & Co. KG updated due to a notified change of corporate name] Abbott Diagnostics GmbH | Professional use as a surfactant in the final use of In-Vitro Diagnostic Devices (IVDs) for clinical testing using ARCHITECT, Alinity and ABBOTT PRISM automated analyser systems. | Opinions adopted | |
| 0168-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Abbott Diagnostics GmbH | Professional use as a surfactant, in wash buffer components used in conjunction with Fluorescence In Situ Hybridisation (FISH) test kits and/or their Laboratory Developed Test (LDT) equivalents, in clinical diagnostic use for medical analysis of human tissue and blood samples to identify characteristic genetic abnormalities related to specific disease conditions. | Opinions adopted | |
| 0204-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Biokit S.A. | Professional use of 4-tert-OPnEO as a detergent during the final use of latex-based, ELISA and CLIA In-Vitro-Diagnostic kits. | Opinion development | |
| 0012-12 | Initial | Lead chromate molybdate sulphate red (C.I. Pigment Red 104) | 235-759-9 | 12656-85-8 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Professional use of solid or liquid colour premixes and pre-compounds containing pigment in the application of hotmelt road marking | Authorisation expired | |
| 0012-11 | Initial | Lead sulfochromate yellow (C.I. Pigment Yellow 34) | 215-693-7 | 1344-37-2 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Professional use of solid or liquid colour premixes and pre-compounds containing pigment in the application of hotmelt road marking | Authorisation expired | |
| 0167-04 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Abbott Ireland | Professional use of system solutions (Pre-Trigger and Trigger) in the final use of the In-Vitro Diagnostic Devices (IVDs) on ARCHITECT and Alinity automated analyser systems. | Opinions adopted | |
| 0012-06 | Initial | Lead chromate molybdate sulphate red (C.I. Pigment Red 104) | 235-759-9 | 12656-85-8 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Professional, non-consumer application of paints on metal surfaces (such as machines, vehicles, structures, signs, road furniture etc.) or as road marking | Authorisation expired | |
| 0012-05 | Initial | Lead sulfochromate yellow (C.I. Pigment Yellow 34) | 215-693-7 | 1344-37-2 | DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] | Professional, non-consumer application of paints on metal surfaces (such as machines, vehicles, structures, signs, road furniture etc.) or as road marking | Authorisation expired | |
| 0105-01 | Initial | Sodium dichromate | 234-190-3 |
7789-12-0 10588-01-9 | ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] | Repackaging of Sodium Dichromate to be supplied as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings | Opinions adopted | |
| 0095-04 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” | Surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering | Commission decided | |
| 0032-05 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
|
Surface treatment (except passivation of tin-plated steel (ETP)) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering (unrelated to Functional chrome plating or Functional chrome plating with decorative character) | Commission decided | |
Categories Display
Route: .live1
