- ECHA
- Information on Chemicals
- Adopted opinions and previous consultations on applications for authorisation
Adopted opinions and previous consultations on applications for authorisation
Adopted opinions and previous consultations on applications for authorisation
This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.
On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. The table below will be updated at a later stage.
| 0121-02 | Initial | Pentazinc chromate octahydroxide | 256-418-0 | 49663-84-5 | Ramboll Belgium BVBA [application transferred from: “Indestructible Paint Ltd.” due to a notified legal entity change] | Use of pentazinc chromate octahydroxide in stoved epoxy primer for corrosion protection of aircraft engine components in aerospace and aeroderivative applications | Commission decided | |
| 0151-02 | Initial | Anthracene oil | 292-602-7 | 90640-80-5 | Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] | Use of AO for manufacture of formulations for various industrial uses | Opinions adopted | |
| 0151-01 | Initial | Pitch, coal tar, high temp. | 266-028-2 | 65996-93-2 | Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] | Use of CTPht for manufacture of formulations for various industrial uses | Opinions adopted | |
| 0152-02 | Initial | Anthracene oil | 292-602-7 | 90640-80-5 | Rain Carbon bvba | Use of AO for manufacture of formulations for various industrial uses | Opinions adopted | |
| 0152-01 | Initial | Pitch, coal tar, high temp. | 266-028-2 | 65996-93-2 | Rain Carbon bvba | Use of CTPht for manufacture of formulations for various industrial uses | Opinions adopted | |
| 0027-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | RAG Aktiengesellschaft, RAG Anthrazit Ibbenbüren GmbH | Use of Tricholoroethylene-containing vulcanising and bonding agents for endless connections and repair of chloroprene rubber coated conveyor belts in underground hard coal mining | Authorisation expired | |
| 0200-05 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH; STAT-Dx Life S.L.; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits with regulatory impact of the product groups sample preparation, PCR, sequencing (and immunoassay for 4-tert-OPnEO only) | Opinion development | |
| 0200-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH; STAT-Dx Life S.L. | Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0200-07 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0200-08 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0200-06 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. | Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits with regulatory impact of the product groups sample preparation, PCR, sequencing (and immunoassay for 4-tert-OPnEO only) | Opinion development | |
| 0200-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | QIAGEN GmbH | Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0200-02 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH | Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0200-04 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | QIAGEN GmbH | Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing | Opinion development | |
| 0054-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Praxair Surface Technologies GmbH | Industrial spraying or brush application of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment, to ensure a high temperature corrosion & oxidation resistance, as well as anti-fouling properties or lubricity at high temperature, for automotive, aviation, power generation machinery, Oil and Gas and marine applications. | Commission decided | |
| 0054-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Praxair Surface Technologies GmbH | Industrial spraying of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment to ensure either a low temperaturecured coating for corrosion protection, or a high temperature corrosion & oxidation resistance with reduction of surface roughness or a high temperature adhesive, for aviation, power generation machinery, Oil and Gas and marine applications. | Commission decided | |
| 0047-02 | Initial | Potassium hydroxyoctaoxodizincatedichromate | 234-329-8 | 11103-86-9 |
PPG Industries (UK) Ltd Finalin GmbH PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative] PPG Coatings SA Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name] | Use of potassium hydroxyoctaoxodizincatedichromate in paints, in primer, sealants, and coatings (including as wash primers) | Commission decided | |
| 0047-01 | Initial | Potassium hydroxyoctaoxodizincatedichromate | 234-329-8 | 11103-86-9 |
PPG Industries (UK) Ltd Finalin GmbH PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative] PPG Coatings SA Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name] | Formulation of Mixtures | Commission decided | |
| 0203-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. – OR5; Sealants Europe SAS; PPG Industries (UK) Ltd.; Boeing Distribution, Inc. – [Decision discontinued as of 01/01/2021]; Aviall UK Inc.; Wesco Aircraft EMEA Ltd (Poland); HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] | Mixing, by Aerospace and Defence Companies, and their associated supply chains, including the Applicants, of base polysulfide sealant components with OPE-containing hardener, resulting in mixtures containing < 0.1% w/w of OPE for Aerospace and Defence uses that are exempt from authorisation under REACH Art. 56(6)(a). | Opinions adopted | |
| 0203-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. – OR5; Sealants Europe SAS; PPG Industries (UK) Ltd.; Boeing Distribution, Inc. – [Decision discontinued as of 01/01/2021]; Aviall UK Inc.; Wesco Aircraft EMEA Ltd (Poland); HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] | The formulation of a hardener component containing OPE in Aerospace and Defence (A&D) two-part polysulphide sealants. | Opinions adopted | |
| 0090-02 | Initial | Formaldehyde, oligomeric reaction products with aniline | 500-036-1 | 25214-70-4 | Polynt Composites France | Industrial use of an epoxy resin hardener containing technical MDA aimed at immobilising spent ion exchange resins in a high containment matrix | Commission decided | |
| 0090-01 | Initial | Formaldehyde, oligomeric reaction products with aniline | 500-036-1 | 25214-70-4 | Polynt Composites France | Formulation of an epoxy resin hardener containing technical MDA | Commission decided | |
| 0089-01 | Initial | Bis(2-methoxyethyl) ether | 203-924-4 | 111-96-6 | PMC ISOCHEM [application transferred from original Applicant: ISOCHEM due to a notified legal entity change] | Use of diglyme as a process solvent in one step of the manufacturing of an Active Pharmaceutical Ingredient used in an anti-protozoal drug | Commission decided | |
| 0123-01 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 | Plastic Planet srl | Formulation of recycled soft PVC containing DEHP in compounds and dry-blends | Opinions adopted | |
| 0123-02 | Review report | Bis(2-ethylhexyl) phthalate | 204-211-0 | 117-81-7 | Plastic Planet srl | Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce the following PVC articles: (1) articles used outside of the interior space in applications in the field of construction, civil engineering, garden features such as ponds and roofing, agriculture (including horticulture) and industrial workplaces without potential for mouthing or prolonged contact with human skin or any contact with mucous membranes; (2) articles used in interior space in industrial and agricultural workplaces; or (3) footwear used in professional, industrial and/or agricultural workplaces. | Opinions adopted | |
| 0206-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Phadia GmbH; Thermo Fisher Scientific Baltics UAB | Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB | Opinion development | |
| 0206-02 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | Phadia GmbH; Thermo Fisher Scientific Baltics UAB | Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB | Opinion development | |
| 0206-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Phadia GmbH; B∙R∙A∙H∙M∙S GmbH | Coating Thyroid Stimulating Hormone Receptor onto articles used as components of IVD reagent systems at B∙R∙A∙H∙M∙S GmbH and Phadia GmbH | Opinion development | |
| 0192-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Pfizer Manufacturing Belgium NV | The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant within a lubricant used in the manufacture of pharmaceutical drug products. | Opinions adopted | |
| 0198-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Pfizer Ireland Pharmaceuticals | The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of biopharmaceuticals - Viral Inactivation and associated processes. | Opinion development | |
| 0198-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Pfizer Ireland Pharmaceuticals | The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of biopharmaceuticals – Post-Production Cleaning. | Opinion development | |
| 0019-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | Parker Hannifin Manufacturing Netherlands (Filtration & Separation) BV | Use of trichloroethylene (TCE) as a process solvent for the manufacturing of modules containing hollow fibre gas separation membranes | Commission decided | |
| 0033-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Oy Kromatek Ab; Kova-Kromi Oy; CrTe-Plating Oy; Saizeri Plating Oy; Turun Kovakromi Oy; Veljekset Wallenius Oy; Pirkan Kovakromaus Oy | Use of chromium trioxide in Cr(VI) based functional plating | Commission decided | |
| 0139-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Ortho-Clinical Diagnostics France [application transferred from: “Ortho-Clinical Diagnostics” due to a notified legal entity change]. | Use of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) in two in vitro diagnostic VITROS® products used by professional diagnostic laboratories to detect antibodies to human hepatitis A virus and IgG antibodies to rubella virus. | Opinions adopted | |
| 0139-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Ortho-Clinical Diagnostics - [Application void as of 01/01/2021] | Formulation of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) for use in the manufacture of in vitro diagnostic VITROS® products used for infectious disease screening, endocrinology, and oncology testing. | Application void as of 01 January 2021 | |
| 0108-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | ORGAPHARM | Use as a process solvent in the manufacture of an Active Pharmaceutical Ingredient: Flecainide acetate | Commission decided | |
| 0108-02 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | ORGAPHARM | Use as an process solvent in the manufacture of an Active Pharmaceutical Ingredient: Nefopam hydrochloride | Commission decided | |
| 0215-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Oras Oy Oras Olesno Sp.z.o.o. | Electroplating of metal and plastic substrates using chromium trioxide to achieve functional surfaces for sanitary applications | Opinion development | |
| 0215-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Oras Oy | Pre-treatment (“etching”) of plastic substrates using chromium trioxide for electroplating processes in sanitary applications | Opinion development | |
| 0111-02 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | OLON Spa | The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient prednisolone steaglate. | Commission decided | |
| 0111-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | OLON Spa | The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient for epirubicin. | Commission decided | |
| 0170-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
Octapharma AB Octapharma Pharmazeutika Produktionsgesellschaft m.b.H Octapharma S.A.S. Octapharma Produktionsgesellschaft Deutschland mbH | Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as detergent for a virus inactivation step (solvent/detergent treatment) during the manufacture of plasma-derived and recombinant medicinal products | Opinions adopted | |
| 0170-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Octapharma AB | Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as component of a chromatography column regeneration solution during the manufacture of a recombinant-derived Factor VIII | Opinions adopted | |
| 0159-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Nuova Ompi S.r.l. unipersonale | Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for one specific medicinal product (NeoRecormon®) of one pharmaceutical company. | Opinions adopted | |
| 0162-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Novo Nordisk A/S | Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as a solvent/detergent agent for virus inactivation in the manufacture of pharmaceutical products used in the treatment of rare bleeding disorders. | Opinions adopted | |
| 0061-01 | Initial | Bis(2-methoxyethyl) ether (Diglyme) | 203-924-4 | 111-96-6 | Novartis Ringaskiddy Limited | Use of diglyme as solvent in the manufacturing process of an intermediate for further conversion into a pharmaceutical compound used in medicinal products for treatment of respiratory diseases | Commission decided | |
| 0010-01 | Initial | Diarsenic trioxide | 215-481-4 | 1327-53-3 | Nordenhamer Zinkhütte GmbH | Industrial use of diarsenic trioxide to produce a copper concentrate in the purification of the leaching solution in a zinc electrowinning process | Commission decided | |
| 0057-05 | Initial | Dichromium tris(chromate) | 246-356-2 | 24613-89-6 | Nexter Systems | Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. | Commission decided | |
| 0057-04 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
Nexter Mechanics
Nexter Systems | Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. | Commission decided | |
| 0057-03 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Nexter Mechanics | Industrial use of a mixture of chromium trioxide for the black colour hard chromium plating of exterior surface of steel weapon barrel designed for military use, to ensure, during the whole gun barrel service life, stealth, erosion, corrosion and high temperature resistances in the condition of uses. | Commission decided | |
| 0057-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Nexter Mechanics | Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament steels parts which are thermomechanically stressed and in contact with oxidizing gas at high temperature, so as to ensure a thermal barrier with high melting point, resistance to wear and oxidation associated with weapons as well as resistance to impact and atmospheric corrosion. | Commission decided | |
| 0057-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Nexter Mechanics | Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament parts in order to ensure surface hardness, resistance to atmospheric corrosion, abrasive wear resistance and friction coefficient for parts in relative movement. | Commission decided | |
| 0125-01 | Initial | Bis(2-methoxyethyl) ether | 203-924-4 | 111-96-6 | N.V. Ajinomoto OmniChem S.A. | Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. | Commission decided | |
| 0066-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | MTU Aero Engines AG | Functional chrome plating for aerospace applications for civil and military uses, comprising coating of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components | Commission decided | |
| 0066-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | MTU Aero Engines AG | Surface treatment for aerospace applications for civil and military uses, comprising treatment of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components, unrelated to functional chrome plating | Commission decided | |
| 0016-01 | Initial | Trichloroethylene | 201-167-4 | 79-01-6 | Microporous GmbH | Trichloroethylene used as degreasing solvent in the manufacture of polyethylene separators for lead-acid batteries | Commission decided | |
| 0049-01 | Initial | Ammonium dichromate | 232-143-1 | 7789-09-5 | Micrometal GmbH | The use of Ammonium dichromate (ADC) as a photosensitizer for production of micro components | Commission decided | |
| 0120-01 | Initial | 1,2-dichloroethane (EDC) | 203-458-1 | 107-06-2 | Microbeads AS | Industrial use as a swelling agent during the sulfonation reaction of crosslinked polystyrene beads in the manufacture of ion exchange resins for purification of radioactive waste | Commission decided | |
| 0202-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Merckle-GmbH-Ulm | The use of 4-OPnEO as an emulsifier in a silicone oil emulsion for siliconization of pre-filled syringes in a medicinal product | Opinions adopted | |
| 0197-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | MERCK MILLIPORE LIMITED | Industrial use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a surface-active ingredient for the production of two types of mixed cellulose ester membranes (lateral flow and microfiltration membranes). | Opinions adopted | |
| 0197-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | MERCK MILLIPORE LIMITED | Downstream use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as component of mixed cellulose ester membranes. | Opinions adopted | |
| 0175-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Merck KGaA | Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (technical grade) as raw material for the manufacturing of GMP Triton® X-100 Emprove® Expert according to IPEC standards | Opinions adopted | |
| 0091-01 | Initial | Bis(2-methoxyethyl) ether | 203-924-4 | 111-96-6 | Merck KGaA | Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 | Commission decided | |
| 0157-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
Merck Biodevelopment SAS Fujifilm Diosynth Biotechnologies (UK) Ltd - [Application void as of 01/01/2021] | Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a detergent in the purification process of G-CSF (Granulocyte Colony Stimulating Factor) inclusion bodies | Opinions adopted | |
| 0127-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o. | Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines | Commission decided | |
| 0087-01 | Initial | Bis(2-methoxyethyl) ether (Diglyme) | 203-924-4 | 111-96-6 | MAFLON S.P.A. | Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. | Commission decided | |
| 0189-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
Lonza Biologics Porriño, SL. Lonza Biologics, plc. - [Application void as of 01/01/2021] | Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated for virus inactivation via solvent/detergent treatment in the manufacture of recombinant medicinal active pharmaceutical ingredients (APIs) from mammalian cell cultures | Opinions adopted | |
| 0011-02 | Initial | Diarsenic trioxide | 215-481-4 | 1327-53-3 | Linxens France SA | Industrial use of diarsenic trioxide as processing aid in gold electroplating | Commission decided | |
| 0011-01 | Initial | Diarsenic trioxide | 215-481-4 | 1327-53-3 | Linxens France SA | Formulation of diarsenic trioxide into a mixture | Commission decided | |
| 0225-02 | Initial | 4,4'-methylenebis[2-chloroaniline] | 202-918-9 | 101-14-4 | Limburgse Urethane Castings NV | Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for heavy-duty rollers, tensioner pads and spring blocks with high reliability requirements for offshore energy and renewables sectors. | Opinion development | |
| 0225-01 | Initial | 4,4'-methylenebis[2-chloroaniline] | 202-918-9 | 101-14-4 | Limburgse Urethane Castings NV | Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for custom-made rollers with high reliability requirements for steel and aluminium sectors. | Opinion development | |
| 0184-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Lilly France S.A.S.; Eli Lilly Italia S.p.A. | Industrial formulation (dilution) of a silicone solution containing 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated and its subsequent use as a lubricant in the manufacture of medicinal product delivery devices | Opinions adopted | |
| 0085-01 | Initial | Bis(2-methoxyethyl) ether (Diglyme) | 203-924-4 | 111-96-6 | Life Technologies AS | Use of diglyme as a process chemical in the manufacture of Dynabeads. | Commission decided | |
| 0176-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | LFB BIOMEDICAMENTS | Use as virus inactivation into the manufacture process of plasma-derived immunoglobulins. | Opinions adopted | |
| 0226-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | LETI Pharma, S.L.U. [name of applicant in the original application: Laboratorios LETI, S.L.U. updated due to a notified change of corporate name] | Use of 4-tert-OPnEO in aqueous buffers during the manufacturing process of the active pharmaceutical ingredient (Protein Q) of the veterinary vaccine LetiFend® | Opinion development | |
| 0212-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
LARS Chemie, spol. s r.o. CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U. | Industrial use of chromium trioxide for the etching, pre-treatment step in the electroplating process of functional chrome plating with decorative character | Opinion development | |
| 0212-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 |
LARS Chemie, spol. s r.o. CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U. | Industrial use of chromium trioxide for the functional chrome plating with decorative character for automotive and sanitary industry | Opinion development | |
| 0079-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Lanxess Deutschland GmbH | Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins | Commission decided | |
| 0079-02 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Lanxess Deutschland GmbH | Industrial use as a swelling agent and reaction medium during the phthalimidomethylation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of anion exchange and chelating resins | Commission decided | |
| 0223-01 | Review report | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Lanxess Deutschland GmbH | Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins. | Opinion development | |
| 0029-01 | Initial | 1,2-Dichloroethane (EDC) | 203-458-1 | 107-06-2 | Laboratoires Expanscience | Use as process and extracting solvent in the manufacture of plant-derived pharmaceutical bioactive ingredients | Commission decided | |
| 0150-02 | Initial | Anthracene oil | 292-602-7 | 90640-80-5 | Koppers Denmark ApS | Use of AO for manufacture of formulations for various industrial uses | Opinions adopted | |
| 0150-01 | Initial | Pitch, coal tar, high temp. | 266-028-2 | 65996-93-2 | Koppers Denmark ApS | Use of CTPht for manufacture of formulations for various industrial uses | Opinions adopted | |
| 0132-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | KEUCO GmbH & Co KG | Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications | Opinions adopted | |
| 0132-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | KEUCO GmbH & Co KG | Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes | Opinions adopted | |
| 0038-01 | Initial | Sodium dichromate | 234-190-3 |
7789-12-0 10588-01-9 | Kemira Chemicals Oy | Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite | Commission decided | |
| 0155-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Kedrion S.p.A | Use of 4-tert-OPnEO as Triton X-100 as detergent for virus inactivation in the manufacturing process of the human plasma-derived medicinal products Plasmagrade/Plasmasafe and Resusix, as well as Plasminogen (pre-commercialization name) and any subsequent commercialization brand | Opinions adopted | |
| 0169-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
Janssen Vaccines & Prevention BV Janssen Biologics B.V. | 4-tert-Octylphenol ethoxylate is used as a lysing agent for the permeabilization of the host cell membrane to release adenovirus particles used for the manufacture of vaccines. Its use allows the selective elimination of enveloped adventitious viruses and is compatible with the chemicals needed to control the host cell DNA precipitation in the next process step. | Opinions adopted | |
| 0075-01 | Initial | Sodium dichromate | 234-190-3 |
7789-12-0 10588-01-9 | Jacobs Douwe Egberts DE GmbH Dr. Otto Suwelack Nachf. GmbH & Co. KG Européenne de Lyophilisation S.A. | Use of sodium dichromate as a corrosion inhibitor in ammonia absorption deep cooling systems as applied in the industrial production of freeze dried products such as coffee, herbs, spices and comparable products. | Commission decided | |
| 0194-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Instrumentation Laboratory SpA | Use as a lysing agent for red blood cells in blood analysis diagnostic device. | Opinions adopted | |
| 0013-02 | Initial | Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane |
221-695-9 247-148-4 | 3194-55-6 25637-99-4 134237-50-6 134237-51-7 134237-52-8 | INEOS Styrenics Netherlands BV INEOS Styrenics Ribecourt SAS INEOS Styrenics Wingles SAS Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna. Synthos Kralupy a.s. StyroChem Finland Oy Monotez SA RP Compounds GmbH Synbra Technology bv Sunpor Kunststoff GmbH Dunastyr Polystyrene Manufacturing C. Co. Ltd Versalis SpA Unipol Holland bv | Manufacture of flame retarded expanded polystyrene (EPS) articles for use in building applications | Authorisation expired | |
| 0013-01 | Initial | Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane |
221-695-9 247-148-4 | 3194-55-6 25637-99-4 134237-50-6 134237-51-7 134237-52-8 | INEOS Styrenics Netherlands BV INEOS Styrenics Ribecourt SAS INEOS Styrenics Wingles SAS Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna. Synthos Kralupy a.s. StyroChem Finland Oy Monotez SA RP Compounds GmbH Synbra Technology bv Sunpor Kunststoff GmbH Dunastyr Polystyrene Manufacturing C. Co. Ltd Versalis SpA Unipol Holland bv | Formulation of flame retarded expanded polystyrene (EPS) to solid unexpanded pellets using hexabromocyclododecane as the flame retardant additive (for onward use in building applications) | Authorisation expired | |
| 0149-01 | Initial | Pitch, coal tar, high temp. | 266-028-2 | 65996-93-2 | Industrial Quimica del Nalon, S.A. | Use of CTPht for manufacture of formulations for various industrial uses | Opinions adopted | |
| 0121-01 | Initial | Pentazinc chromate octahydroxide | 256-418-0 | 49663-84-5 | Indestructible Paint Ltd. | Formulation of mixtures | Commission decided | |
| 0105-01 | Initial | Sodium dichromate | 234-190-3 |
7789-12-0 10588-01-9 | ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] | Repackaging of Sodium Dichromate to be supplied as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings | Opinions adopted | |
| 0105-02 | Initial | Sodium dichromate | 234-190-3 |
7789-12-0 10588-01-9 | ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] | Use of Sodium Dichromate as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings | Opinions adopted | |
| 0185-02 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | IDEXX Montpellier SAS | Formulation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in the manufacture of sample diluents and standard solutions used in in vitro diagnostic veterinary ELISA Plate tests used for the detection of infectious diseases in livestock and poultry | Opinions adopted | |
| 0185-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | IDEXX Montpellier SAS | Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as detergent in the technical manufacturing of in vitro diagnostic veterinary ELISA Plate tests (plate coating) to prevent the non-specific binding of unwanted macromolecules | Opinions adopted | |
| 0185-03 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - |
IDEXX EUROPE B.V.; IDEXX Montpellier SAS | Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions | Opinions adopted | |
| 0185-04 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | IDEXX EUROPE B.V. | Use of 4-Nonylphenol, branched and linear, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions | Opinions adopted | |
Categories Display
Route: .live2
