Skip to Content
Skip to Content

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. The table below will be updated at a later stage.

 

 
0066-02 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Surface treatment for aerospace applications for civil and military uses, comprising treatment of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components, unrelated to functional chrome plating Commission decided
0100-02 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Luftfahrttechnik GmbH Surface treatment for applications in the aeronautics and aerospace industries (unrelated to Functional chrome plating or Functional chrome plating with decorative character) Commission decided
0032-04 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change]
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis Minerals B.V. in its legal capacity as Only Representative of Elementis Chromium Inc. [application transferred from original Applicant: “Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc.” due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Surface treatment for applications in the aeronautics and aerospace industries, unrelated to Functional chrome plating or Functional chrome plating with decorative character Commission decided
0135-01 Initial Chromium trioxide 215-607-8 1333-82-0 Thyssenkrupp Electrical Steel GmbH;
Thyssenkrupp Electrical
Steel UGO S.A.S.
Surface treatment for the manufacture of grain-oriented electrical steel used in magnetic circuits of electric devices, in particular magnetic cores of high-performance transformers Opinions adopted
0207-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Chemetall GmbH; Chemetall PLC The formulation of a hardener component containing NPE in Aerospace two-part polysulphide sealants. Opinions adopted
0203-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. – OR5; Sealants Europe SAS; PPG Industries (UK) Ltd.; Boeing Distribution, Inc.; Aviall UK Inc.; Wesco Aircraft EMEA Ltd (Poland); HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] The formulation of a hardener component containing OPE in Aerospace and Defence (A&D) two-part polysulphide sealants. Opinions adopted
0001-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Rolls-Royce plc The processing of a stop-off formulation containing DEHP during the diffusion bonding and manufacture of aero engine fan blades. Commission decided
0111-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 OLON Spa The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient for epirubicin. Commission decided
0111-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 OLON Spa The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient prednisolone steaglate. Commission decided
0109-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Akzo Nobel Chemicals SpA The use of 1,2-dichloroethane as recyclable solvent in the production of a polyacrylate surfactant Commission decided
0190-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Teva Baltics UAB The use of 4-(1,1,3,3-tetramethylbutyl)phenol ethoxylated (TritonX-100) as a nonionic surfactant for bacteria cells disruption and washing of inclusion bodies in Biological Drug Substance manufacturing process Opinions adopted
0164-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Swedish Orphan Biovitrum The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in manufacture of biopharmaceuticals by Swedish Orphan Biovitrum AB. Opinions adopted
0198-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Pfizer Ireland Pharmaceuticals The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of biopharmaceuticals - Viral Inactivation and associated processes. Opinion development
0198-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Pfizer Ireland Pharmaceuticals The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of biopharmaceuticals – Post-Production Cleaning. Opinion development
0174-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Hospira Zagreb d.o.o., a Pfizer company The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of one biopharmaceutical protein, a biosimilar product, used to prevent infection and neutropenic fevers. Opinions adopted
0192-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Pfizer Manufacturing Belgium NV The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant within a lubricant used in the manufacture of pharmaceutical drug products. Opinions adopted
0202-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merckle-GmbH-Ulm The use of 4-OPnEO as an emulsifier in a silicone oil emulsion for siliconization of pre-filled syringes in a medicinal product Opinion development
0049-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Micrometal GmbH The use of Ammonium dichromate (ADC) as a photosensitizer for production of micro components Commission decided
0146-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tata Steel UK Ltd The use of Chromium (VI) Trioxide for the manufacture of Electrolytic Chromium/Chromium oxide Coated Steel (ECCS) Opinions adopted
0034-02 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium Trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0114–02 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0034-01 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional electroplating with decorative character) Commission decided
0114–01 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional plating with decorative character) Commission decided
0103-01 Initial Chromium trioxide 215-607-8 1333-82-0 Euro Cryospace France The use of chromium trioxide for the surface preparation of aluminium alloy cryogenic tanks used in the Ariane 5 launcher Commission decided
0210-01 Initial Chromium trioxide 215-607-8 1333-82-0 C. Hübner GmbH The use of chromium trioxide in the etching of single-component (1K) plastic articles. Opinion development
0210-03 Initial Chromium trioxide 215-607-8 1333-82-0 C. Hübner GmbH The use of chromium trioxide in the functional electroplating of single-component (1K) and multi-component (2K/3K) plastic articles with the specific aim of obtaining a final Cr(0) coating with high durability and chemical resistance while preserving the lightweight nature of the plastic component. Opinion development
0210-02 Initial Chromium trioxide 215-607-8 1333-82-0 C. Hübner GmbH The use of chromium trioxide in the selective etching of multi-component (2K/3K) plastic articles. Opinion development
0030-01 Initial Sodium chromate 231-889-5 7775-11-3
  • Dometic GmbH
  • Dometic Hűtőgépgyártó és Kereskedelmi Zrt.
The use of sodium chromate as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators up to 0.75% by weight (Cr6+) in the cooling solution Commission decided
0104-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Borealis Plastomers B.V. The use of sodium dichromate as in-situ corrosion inhibitor in a closed water/ammonia absorption cooling system Commission decided
0031-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Boliden Mineral AB The use of sodium dichromate in copper/lead separation in concentrators handling complex sulphide ores Commission decided
0069-01 Initial Chromium trioxide 215-607-8 1333-82-0 Topocrom GmbH TOPOCROM functional chrome plating in closed reactor systems for the establishment of adjustable hemispherical surface structures. Commission decided
0017-01 Initial Trichloroethylene 201-167-4 79-01-6 ENTEK International Limited Trichloroethylene as an extraction solvent for removal of process oil and formation of the porous structure in polyethylene based separators used in lead-acid batteries Commission decided
0016-01 Initial Trichloroethylene 201-167-4 79-01-6 Microporous GmbH Trichloroethylene used as degreasing solvent in the manufacture of polyethylene separators for lead-acid batteries Commission decided
0194-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Instrumentation Laboratory SpA Use as a lysing agent for red blood cells in blood analysis diagnostic device. Opinions adopted
0108-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 ORGAPHARM Use as a process solvent in the manufacture of an Active Pharmaceutical Ingredient: Flecainide acetate Commission decided
0107-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 emp Biotech GmbH Use as a solvent in manufacture of polymeric particles for pharmaceutical and research purification processes Commission decided
0022-01 Initial Trichloroethylene 201-167-4 79-01-6 SPOLANA a.s. Use as an extraction solvent in caprolactam production Commission decided
0129-01 Review report Trichloroethylene 201-167-4 79-01-6 SPOLANA s.r.o. [name of applicant in the original application: SPOLANA a.s. updated due to a notified change of corporate name] Use as an extraction solvent in caprolactam production Opinions adopted
0081-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 GRUPA LOTOS S.A. Use as an extraction solvent in the de-waxing of petroleum vacuum distillates and de-asphalted oil and de-oiling of slack wax for the production of base oils and paraffinic waxes. Commission decided
0110-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Bayer Pharma AG Use as an industrial solvent in the manufacture of the high-grade pure final intermediate of Iopromide, the Active Pharmaceutical Ingredient for the X-ray contrast medium Ultravist® Commission decided
0108-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 ORGAPHARM Use as an process solvent in the manufacture of an Active Pharmaceutical Ingredient: Nefopam hydrochloride Commission decided
0206-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Phadia GmbH; Thermo Fisher Scientific Baltics UAB Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB Opinion development
0206-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Phadia GmbH; Thermo Fisher Scientific Baltics UAB Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB Opinion development
0029-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Laboratoires Expanscience Use as process and extracting solvent in the manufacture of plant-derived pharmaceutical bioactive ingredients Commission decided
0176-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - LFB BIOMEDICAMENTS Use as virus inactivation into the manufacture process of plasma-derived immunoglobulins. Opinions adopted
0195-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - RSI ChemRep Europe Ltd (O002) OR for OraSure Technologies Inc Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as surfactant in in –vitro diagnostic device developer solution. Opinion development
0178-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Baxter AG; Baxalta Belgium Manufacturing SA Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated (as a detergent) for virus inactivation via S/D (Solvent/Detergent) treatment in recombinant and plasma-derived medicinal products. Opinions adopted
0163-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Use of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) in enhancement solutions and DELFIA standard and maintenance solutions as a critical ingredient for detection process while measuring europium (or other lanthanide) content in In Vitro Diagnostic assays and RUO products or during maintenance of instruments Opinions adopted
0139-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Ortho-Clinical Diagnostics France [application transferred from: “Ortho-Clinical Diagnostics” due to a notified legal entity change]. Use of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) in two in vitro diagnostic VITROS® products used by professional diagnostic laboratories to detect antibodies to human hepatitis A virus and IgG antibodies to rubella virus. Opinions adopted
0162-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Novo Nordisk A/S Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as a solvent/detergent agent for virus inactivation in the manufacture of pharmaceutical products used in the treatment of rare bleeding disorders. Opinions adopted
0170-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Octapharma AB Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as component of a chromatography column regeneration solution during the manufacture of a recombinant-derived Factor VIII Opinions adopted
0170-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Octapharma AB
Octapharma Pharmazeutika Produktionsgesellschaft m.b.H
Octapharma S.A.S.
Octapharma Produktionsgesellschaft Deutschland mbH
Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as detergent for a virus inactivation step (solvent/detergent treatment) during the manufacture of plasma-derived and recombinant medicinal products Opinions adopted
0177-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Rentschler Biopharma SE Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated in a washing buffer applied during a purification step in the manufacture of the monoclonal antibody Dinutuximab beta Opinions adopted
0166-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Rousselot bvba Use of 4-(1,1,3,3-tetramethylbutyl)phenol ethoxylated as a surfactant in the manufacturing of low endotoxin gelatin Opinions adopted
0205-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Becton Dickinson Distribution Center NV Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO)) as a processing aid in imported Diagnostics Opinion development
0188-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (as Triton X-100) in the assay buffer of the GSP® Neonatal GALT kit used for the semi-quantitative determination of galactose-1-phosphate uridyl transferase (GALT) activity Opinions adopted
0175-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merck KGaA Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (technical grade) as raw material for the manufacturing of GMP Triton® X-100 Emprove® Expert according to IPEC standards Opinions adopted
0157-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merck Biodevelopment SAS
FUJIFILM Diosynth Biotechnologies UK Limited
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a detergent in the purification process of G-CSF (Granulocyte Colony Stimulating Factor) inclusion bodies Opinions adopted
0185-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX Montpellier SAS Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as detergent in the technical manufacturing of in vitro diagnostic veterinary ELISA Plate tests (plate coating) to prevent the non-specific binding of unwanted macromolecules Opinions adopted
0187-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - AGC Biologics A/S;
AGC Biologics GmbH
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as Triton X-100 as a detergent during the purification process of recombinant biopharmaceuticals derived from microbial expression hosts in projects where processes have been approved by the authorities (GMP compliant) Opinions adopted
0187-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - AGC Biologics A/S Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as Triton X-100 as detergent for the inactivation of viruses in the production of therapeutic proteins using mammalian cell hosts in projects where processes have been approved by the authorities (GMP compliant) Opinions adopted
0189-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Lonza Biologics Porriño, SL.; Lonza Biologics, plc. Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated for virus inactivation via solvent/detergent treatment in the manufacture of recombinant medicinal active pharmaceutical ingredients (APIs) from mammalian cell cultures Opinions adopted
0185-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX EUROPE B.V.;
IDEXX Montpellier SAS
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions Opinions adopted
0185-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - IDEXX EUROPE B.V. Use of 4-Nonylphenol, branched and linear, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions Opinions adopted
0155-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Kedrion S.p.A Use of 4-tert-OPnEO as Triton X-100 as detergent for virus inactivation in the manufacturing process of the human plasma-derived medicinal products Plasmagrade/Plasmasafe and Resusix, as well as Plasminogen (pre-commercialization name) and any subsequent commercialization brand Opinions adopted
0193-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Yposkesi Use of 4-tert-OPnEO for its non-ionic detergent properties for the cell membrane lysis and viral clearance during the development and manufacturing of viral vectors in medicinal products dedicated to human use (Investigational and Authorized Advanced Therapy Medicinal Product). Opinions adopted
0138-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Boehringer Ingelheim Pharma
GmbH & Co. KG; Boehringer
Ingelheim RCV GmbH & Co KG
Use of 4-tert-OPnEO in a washing buffer to purify biological APIs (active pharmaceutical ingredients) during the production of Palivizumab and Moxetumomab pasudotox-tdfk. Opinions adopted
0226-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - LETI Pharma, S.L.U. [name of applicant in the original application: Laboratorios LETI, S.L.U. updated due to a notified change of corporate name] Use of 4-tert-OPnEO in aqueous buffers during the manufacturing process of the active pharmaceutical ingredient (Protein Q) of the veterinary vaccine LetiFend® Opinion development
0115-03 Initial Potassium chromate 232-140-5 7789-00-6 Saes Getters S.p.A. Use of alkali metal dispensers containing potassium chromate for production of photocathodes. Commission decided
0115-04 Initial Sodium chromate 231-889-5 7775-11-3 Saes Getters S.p.A. Use of alkali metal dispensers containing sodium chromate for production of photocathodes. Commission decided
0073-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Veco B.V. Use of ammonium dichromate as photosensitive component in a polyvinyl alcohol photolithographic lacquer system for the manufacturing of mandrels which are used in nickel electroforming processes. Commission decided
0151-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] Use of AO for manufacture of formulations for various industrial uses Opinions adopted
0150-02 Initial Anthracene oil 292-602-7 90640-80-5 Koppers Denmark ApS Use of AO for manufacture of formulations for various industrial uses Opinions adopted
0152-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon bvba Use of AO for manufacture of formulations for various industrial uses Opinions adopted
0153-02 Initial Anthracene oil 292-602-7 90640-80-5 BILBAINA DE ALQUITRANES, S.A. Use of AO for manufacture of formulations for various industrial uses Opinions adopted
0217-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes) Opinion development
0088-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes). Opinions adopted
0217-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes) Opinion development
0088-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes). Opinions adopted
0087-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 MAFLON S.P.A. Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. Commission decided
0086-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Bracco Imaging s.p.a Use of bis(2-methoxyethyl) ether (diglyme) as a processing aid in the purification of 5-amino-2,4,6-triiodoisophthalic acid dichloride (EC 417- 220-1; CAS 37441-29-5) by precipitation Commission decided
0211-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tata Steel IJmuiden BV; Tata Steel UK Ltd. Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Opinions adopted
0211-02 Initial Sodium dichromate 234-190-3 10588-01-9 Tata Steel IJmuiden BV; Tata Steel UK Ltd. Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Opinions adopted
0134-02 Initial Chromium trioxide 215-607-8 1333-82-0 ThyssenKrupp Rasselstein GmbH Use of Chromium (VI) Trioxide for Electrolytic Chromium Coating of Steel (ECCS) Commission decided
0221-01 Initial Chromium trioxide 215-607-8 1333-82-0 U. S. Steel Košice, s.r.o. Use of Chromium (VI) Trioxide for Passivation of Electrolytic Tinplate (ETP). Opinion development
0134-01 Initial Chromium trioxide 215-607-8 1333-82-0 ThyssenKrupp Rasselstein GmbH Use of Chromium (VI) Trioxide for Passivation of tinplated steel (ETP) Commission decided
0056-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rimex Metals (UK) Ltd Use of chromium trioxide as an oxidising and hardening agent in the manufacture of coloured stainless steel Commission decided
0213-01 Initial Chromium trioxide 215-607-8 1333-82-0 Steel Color S.p.A. Use of chromium trioxide as colouring and hardening agent for stainless steel plates Opinion development
0096-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change] Use of chromium trioxide for chemical conversion and slurry coating applications by aerospace companies and their suppliers Commission decided
0102-01 Initial Chromium trioxide 215-607-8 1333-82-0 Clariant Produkte (Deutschland) GmbH Use of chromium trioxide in a catalyst for the dehydrogenation of propane to propene Commission decided
0033-01 Initial Chromium trioxide 215-607-8 1333-82-0 Oy Kromatek Ab; Kova-Kromi Oy; CrTe-Plating Oy; Saizeri Plating Oy; Turun Kovakromi Oy; Veljekset Wallenius Oy; Pirkan Kovakromaus Oy Use of chromium trioxide in Cr(VI) based functional plating Commission decided
0064-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in dissolved and solid form to produce aqueous solutions of any composition for industrial application. Opinions adopted
0067-01 Initial Chromium trioxide 215-607-8 1333-82-0 Abloy Oy Use of chromium trioxide in electroplating of mechanical and electromechanical cylinders, cam- and padlocks, electromechanical lock cases and architectural hardware. Commission decided
0127-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o.
Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines Commission decided
0093-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of brass, bronze, copper and other copper alloys for medical engineering, aviation and automation products Commission decided
0064-04 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category I. Opinions adopted
0064-03 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category II. Opinions adopted
0064-02 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category III. Opinions adopted
0092-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of plastic, with or without current flow Opinions adopted
0147-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 BILBAINA DE ALQUITRANES, S.A. Use of CTPht as a binder in the manufacture of clay targets Opinions adopted
0148-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 DEZA a.s. Use of CTPht as a binder in the manufacture of clay targets Opinions adopted
0151-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0153-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 BILBAINA DE ALQUITRANES, S.A. Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0152-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Rain Carbon bvba Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0150-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Koppers Denmark ApS Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0149-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Industrial Quimica del Nalon, S.A. Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0005-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided
0006-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Sasol-Huntsman GmbH & Co. KG Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided
0005-02 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP in propellants
Formulation: Industrial use of DBP as a burning rate surface moderant, plasticiser and/or coolant in the formulation of nitrocellulose-based propellant grains.
Use at industrial site: Industrial use of DBP-containing propellant grains in manufacture of ammunition for military and civilian uses, and pyrocartridges for aircraft ejection seat safety systems [includes propellants for police force ammunition and excludes propellants intended for manual, private reloading of ammunition cartridges by civilian users, i.e., licensed individual sports shooters and hunters. No direct consumer use of DBP or its mixtures is covered by this Use.]
Commission decided
0009-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Boliden Kokkola Oy Use of diarsenic trioxide in the purification of metal impurities from the leaching solution in the zinc electrowinning process Commission decided
0116-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] Use of dichromium tris(chromate) for chemical conversion coating applications by aerospace and defence companies and their associated supply chains Commission decided
0045-02 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA
Henkel Global
Supply Chain B.V.
Use of dichromium tris(chromate) for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided
0085-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Life Technologies AS Use of diglyme as a process chemical in the manufacture of Dynabeads. Commission decided
0084-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Roche Diagnostics GmbH Use of diglyme as a process chemical in the manufacture of one specific type of Dynabeads® used in immunodiagnostic assays (in vitro diagnostic) Commission decided
0089-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 PMC ISOCHEM [application transferred from original Applicant: ISOCHEM due to a notified legal entity change] Use of diglyme as a process solvent in one step of the manufacturing of an Active Pharmaceutical Ingredient used in an anti-protozoal drug Commission decided
0125-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 N.V. Ajinomoto OmniChem S.A. Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. Commission decided
0061-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Novartis Ringaskiddy Limited Use of diglyme as solvent in the manufacturing process of an intermediate for further conversion into a pharmaceutical compound used in medicinal products for treatment of respiratory diseases Commission decided
0154-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of IVD-kit reagents on diagnostic analyser systems Opinions adopted
0154-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of IVD-wash solutions on diagnostic analyser systems Opinions adopted
0156-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Sanofi Pasteur Use of Octoxynol-9 for virus splitting and inactivation step in the manufacturing of influenza vaccines Opinions adopted
0171-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0171-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0171-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the formulation and filling of in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0171-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the formulation and filling of in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0171-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the production of proteins and the conjugation of latex beads, both being used as components or for the production of components of in vitro diagnostic (IVD) assays, research or quality control products and other, e.g. analytical applications (processes specified in Appendix 1 to the AoA) Opinions adopted
0171-06 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the production of proteins and the conjugation of latex beads, both being used as components or for the production of components of in vitro diagnostic (IVD) assays, research or quality control products and other, e.g. analytical applications (processes specified in Appendix 1 to the AoA) Opinions adopted
0196-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Vetter Pharma-Fertigung GmbH & Co. KG Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers (syringes and cartridges) used as primary packaging material for 44 medicinal products of several pharmaceutical companies listed in the confidential Appendix 1 to the AoA. These products cover several therapeutic areas, and approx. 40 % of them are listed on the WHO Model List of Essential Medicines (EML). Opinions adopted
0160-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for medicinal products (NeoRecormon® and MIRCERA®). Opinions adopted
0159-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Nuova Ompi S.r.l. unipersonale Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for one specific medicinal product (NeoRecormon®) of one pharmaceutical company. Opinions adopted
0161-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Vetter Pharma-Fertigung GmbH & Co. KG Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for two specific medicinal products (NutropinAq® and Lucentis®) of one pharmaceutical company. Opinions adopted
0173-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products Ltd Use of OPE as detergent in the production of bead components for in-vitro diagnostic kits for an immunoassay platform Opinions adopted
0154-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of OPE in formulation of IVD- wash solutions Opinions adopted
0154-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of OPE in formulation of IVD-kit reagents Opinions adopted
0154-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of OPE in isolation of protein from recombinant cell cultures for the production of IVD-kits (protein cell extraction) Opinions adopted
0121-02 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Ramboll Belgium BVBA [application transferred from: “Indestructible Paint Ltd.” due to a notified legal entity change] Use of pentazinc chromate octahydroxide in stoved epoxy primer for corrosion protection of aircraft engine components in aerospace and aeroderivative applications Commission decided
0118-02 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name];
Finalin GmbH
Use of pentazinc chromate octahydroxide in wash primer, fuel tank primer and aluminized primer for the purpose of corrosion protection in aeronautic applications Commission decided
0115-01 Initial Potassium chromate 232-140-5 7789-00-6 Saes Getters S.p.A. Use of potassium chromate in the fabrication of alkali metal dispensers for production of photocathodes. Commission decided
0098-01 Initial Potassium dichromate 231-906-6 7778-50-9 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change] Use of potassium dichromate for sealing after anodizing applications by aerospace companies and their suppliers Commission decided
0044-02 Initial Potassium dichromate 231-906-6 7778-50-9 Brenntag UK Ltd Use of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films Commission decided
0062-02 Initial Potassium dichromate 231-906-6 7778-50-9 Gentrochema BV Use of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided
0047-02 Initial Potassium hydroxyoctaoxodizincatedichromate 234-329-8 11103-86-9 PPG Industries (UK) Ltd
Finalin GmbH
PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative]
PPG Coatings SA
Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
Use of potassium hydroxyoctaoxodizincatedichromate in paints, in primer, sealants, and coatings (including as wash primers) Commission decided
0136-01 Initial Sodium chromate 231-889-5 7775-11-3 Ariston Thermo SpA Use of sodium chromate as an anticorrosion agent of the carbon steel in sealed circuit of gas absorption appliances up to 0.70% by weight (as Cr6+) in the refrigerant solution Opinions adopted
0099-02 Initial Sodium chromate 231-889-5 7775-11-3
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change]
Use of sodium chromate for sealing after anodizing, chemical conversion coating, pickling and etching applications by aerospace companies and their suppliers Commission decided
0115-02 Initial Sodium chromate 231-889-5 7775-11-3 Saes Getters S.p.A. Use of sodium chromate in the fabrication of alkali metal dispensers for production of photocathodes. Commission decided
0075-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Jacobs Douwe Egberts
DE GmbH
Dr. Otto Suwelack Nachf.
GmbH & Co. KG
Européenne de Lyophilisation S.A.
Use of sodium dichromate as a corrosion inhibitor in ammonia absorption deep cooling systems as applied in the industrial production of freeze dried products such as coffee, herbs, spices and comparable products. Commission decided
0074-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
TOTAL RAFFINERIE
MITTELDEUTSCHLAND
GMBH
Use of sodium dichromate as a corrosion inhibitor in an ammonia absorption deep cooling system of a methanol synthesis plant. Commission decided
0105-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Use of Sodium Dichromate as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted
0041-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Akzo Nobel Pulp and
Performance Chemicals AB
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of potassium chlorate. Commission decided
0039-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
SOLVAY PORTUGAL - PRODUTOS QUIMICOS S.A. Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0036-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ELECTROQUÍMICA DE
HERNANI, S.A.
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0035-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ARKEMA FRANCE Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0038-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Kemira Chemicals Oy Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0037-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Ercros SA Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0041-01 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Akzo Nobel Pulp and Performance Chemicals AB
Akzo Nobel Pulp and Performance Chemicals Oy
Akzo Nobel Pulp and Performance Chemicals S.A.S.
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide. Commission decided
0040-01 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
CAFFARO BRESCIA S.r.l Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorite Commission decided
0137-01 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
SOCIETA' CHIMICA BUSSI S.P.A. Use of sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacturing of sodium chlorite. Commission decided
0042-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ARLANXEO Netherlands B.V. [application transferred from original Applicant: Lanxess Elastomers B.V. due to a notified legal entity change] Use of sodium dichromate as corrosion inhibitor in ammonia absorption deep cooling systems Commission decided
0124-01 Initial Sodium dichromate 234-190-3 10588-01-9 H&R Ölwerke Schindler GmbH;
H&R Chemisch-Pharmazeutische Spezialitäten GmbH
Use of sodium dichromate as corrosion inhibitor in ammonia absorption deep cooling systems, applied for the dewaxing and deoiling process steps of petroleum raffinate. Commission decided
0113-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gruppo Colle.S.r.l. Use of Sodium dichromate as mordant in wool dyeing Commission decided
0222-01 Review report Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gruppo Colle.S.r.l. Use of Sodium dichromate as mordant in wool dyeing with dark colours. Opinion development
0221-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
U. S. Steel Košice, s.r.o. Use of Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP). Opinion development
0097-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change] Use of sodium dichromate for sealing after anodizing applications by aerospace companies and their suppliers Commission decided
0043-02 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Brenntag UK Ltd
Henkel AG & Co. KGaA
AD International BV
Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites and sealings of anodic films Commission decided
0063-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites and sealings of anodic films. Commission decided
0101-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ZF Luftfahrttechnik GmbH Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films Commission decided
0043-03 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Brenntag UK Ltd
Henkel AG & Co. KGaA
AD International BV
Use of Sodium dichromate for the electrolytic passivation of tin plated steel for the packaging industry Commission decided
0063-03 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Use of Sodium dichromate for the electrolytic passivation of tin plated steel for the packaging industry. Commission decided
0112-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
HAPOC GmbH & Co KG Use of sodium dichromate in molten bath form to modify surfaces, especially by blackening, of delicate medical products, specifically micro-surgical instruments Commission decided
0117-01 Initial Strontium chromate 232-142-6 7789-06-2 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change];
PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative]
Cytec Engineered Materials GmbH in its legal capacity as OR of Cytec Industries Inc. [application transferred from original Applicant: “Cytec Engineered Materials Ltd. in its legal capacity as Only Representative of Cytec Industries Inc.” due to a notified change of Only Representative]
Use of strontium chromate in primers applied by aerospace and defence companies and their associated supply chains Commission decided
0019-01 Initial Trichloroethylene 201-167-4 79-01-6 Parker Hannifin Manufacturing Netherlands (Filtration & Separation) BV Use of trichloroethylene (TCE) as a process solvent for the manufacturing of modules containing hollow fibre gas separation membranes Commission decided
0018-01 Initial Trichloroethylene 201-167-4 79-01-6 ROQUETTE Frères Use of trichloroethylene as a processing aid in the biotransformation of starch to obtain betacyclodextrin Commission decided
0014-01 Initial Trichloroethylene 201-167-4 79-01-6 Vlisco Netherlands BV Use of trichloroethylene as a solvent for the removal and recovery of resin from dyed cloth Commission decided
0014-02 Initial Trichloroethylene 201-167-4 79-01-6 Vlisco Netherlands BV Use of trichloroethylene as a solvent in a process to recover and purify resin from process water Commission decided
0024-05 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use of Trichloroethylene as Extraction Solvent for Bitumen in Asphalt Analysis Commission decided
0023-01 Initial Trichloroethylene 201-167-4 79-01-6 A.L.P.A.-AZIENDA LAVORAZIONE PRODOTTI AUSILIARI S.P.A.; CAFFARO INDUSTRIE S.P.A Use of trichloroethylene as solvent in the synthesis of vulcanization accelerating agents for fluoroelastomers Commission decided
0024-01 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use Of Trichloroethylene in Industrial Parts Cleaning by Vapour Degreasing in Closed Systems where specific requirements (system of use-parameters) exist Authorisation expired
0026-01 Initial Trichloroethylene 201-167-4 79-01-6 Richard Geiss GmbH Use of tricholoroethylene in formulation Commission decided
0024-04 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use of tricholoroethylene in formulation Commission decided
0024-03 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use of tricholoroethylene in packaging Commission decided
0026-02 Initial Trichloroethylene 201-167-4 79-01-6 Richard Geiss GmbH Use of tricholoroethylene in packaging Commission decided
0027-01 Initial Trichloroethylene 201-167-4 79-01-6 RAG Aktiengesellschaft, RAG Anthrazit Ibbenbüren GmbH Use of Tricholoroethylene-containing vulcanising and bonding agents for endless connections and repair of chloroprene rubber coated conveyor belts in underground hard coal mining Authorisation expired
0199-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Sanquin Reagents B.V. Use of Triton™ X-100 (4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated) in formulation of components for IVD kits. Opinions adopted



Categories Display

Tagged as:

(click the tag to search for relevant content)


Route: .live1