Skip to Content
Skip to Content

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. The table below will be updated at a later stage.

 

 
0004-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Pending decision
0008-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce PVC articles Authorisation expired
0091-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Merck KGaA Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 Commission decided
0088-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes). Opinions adopted
0217-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes) Opinion development
0125-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 N.V. Ajinomoto OmniChem S.A. Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. Commission decided
0089-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 PMC ISOCHEM [application transferred from original Applicant: ISOCHEM due to a notified legal entity change] Use of diglyme as a process solvent in one step of the manufacturing of an Active Pharmaceutical Ingredient used in an anti-protozoal drug Commission decided
0088-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes). Opinions adopted
0217-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes) Opinion development
0086-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Bracco Imaging s.p.a Use of bis(2-methoxyethyl) ether (diglyme) as a processing aid in the purification of 5-amino-2,4,6-triiodoisophthalic acid dichloride (EC 417- 220-1; CAS 37441-29-5) by precipitation Commission decided
0061-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Novartis Ringaskiddy Limited Use of diglyme as solvent in the manufacturing process of an intermediate for further conversion into a pharmaceutical compound used in medicinal products for treatment of respiratory diseases Commission decided
0085-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Life Technologies AS Use of diglyme as a process chemical in the manufacture of Dynabeads. Commission decided
0084-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Roche Diagnostics GmbH Use of diglyme as a process chemical in the manufacture of one specific type of Dynabeads® used in immunodiagnostic assays (in vitro diagnostic) Commission decided
0087-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 MAFLON S.P.A. Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. Commission decided
0080-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 H&R Ölwerke Schindler GmbH
H&R Chemisch-Pharmazeutische Spezialitäten GmbH
Industrial use as a solvent and anti-solvent of the feedstock and intermediate product streams in the combined de-waxing and de-oiling of refining of petroleum vacuum distillates for the production of base oils and hard paraffin waxes Commission decided
0111-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 OLON Spa The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient prednisolone steaglate. Commission decided
0079-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent and reaction medium during the phthalimidomethylation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of anion exchange and chelating resins Commission decided
0078-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2

  • DOW ITALIA S.R.L.
  • Dow France SAS [name of co-applicant in the original application: Rohm and Haas France SAS updated due to a notified legal entity name change]

Industrial use as a sulphonation swelling agent of polystyrene-divinylbenzene copolymer beads in the production of strong acid cation exchange resins Commission decided
0108-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 ORGAPHARM Use as an process solvent in the manufacture of an Active Pharmaceutical Ingredient: Nefopam hydrochloride Commission decided
0110-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Bayer AG [application transferred from original applicant: Bayer Pharma AG, due to a notified legal entity change] Use as an industrial solvent in the manufacture of the high-grade pure final intermediate of Iopromide, the Active Pharmaceutical Ingredient for the X-ray contrast medium Ultravist® Commission decided
0224-01 Review report 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 EURENCO Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives. Opinion development
0029-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Laboratoires Expanscience Use as process and extracting solvent in the manufacture of plant-derived pharmaceutical bioactive ingredients Commission decided
0083-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 EURENCO Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives Commission decided
0109-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Akzo Nobel Chemicals SpA The use of 1,2-dichloroethane as recyclable solvent in the production of a polyacrylate surfactant Commission decided
0077-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Eli Lilly Kinsale Limited [application transferred from original Applicant: Eli Lilly S.A. - Irish Branch due to a notified legal entity change] Industrial use as a reaction medium and a solvating agent in mediating subsequent chemical transformation reactions leading to the manufacture of an Active Pharmaceutical Ingredient, Raloxifene Hydrochloride Commission decided
0079-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins Commission decided
0081-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 GRUPA LOTOS S.A. Use as an extraction solvent in the de-waxing of petroleum vacuum distillates and de-asphalted oil and de-oiling of slack wax for the production of base oils and paraffinic waxes. Commission decided
0082-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Cytiva Sweden AB [name of applicant in the original application: GE Healthcare Bio-Sciences AB updated due to a notified change of corporate name] Industrial use of 1,2-dichloroethane as an emulsifying solvent in the manufacture of porous particles for beaded chromatography and cell culture media. Commission decided
0111-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 OLON Spa The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient for epirubicin. Commission decided
0076-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 BASF plc - [Decision discontinued as of 01/01/2021; application transferred from original Applicant: BASF SE due to a notified legal entity change] Industrial use as solvent and crystallisation medium in the synthesis of the EU biocide flocoumafen (ISO) Discontinued as of 01 January 2021
0076-01 Initial 1,2-dichloroethane (EDC) 203-458-1 107-06-2 BASF SE Industrial use as solvent and crystallisation medium in the synthesis of the EU pesticide bentazone (ISO) Commission decided
0223-01 Review report 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins. Opinion development
0107-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 emp Biotech GmbH Use as a solvent in manufacture of polymeric particles for pharmaceutical and research purification processes Commission decided
0120-01 Initial 1,2-dichloroethane (EDC) 203-458-1 107-06-2 Microbeads AS Industrial use as a swelling agent during the sulfonation reaction of crosslinked polystyrene beads in the manufacture of ion exchange resins for purification of radioactive waste Commission decided
0108-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 ORGAPHARM Use as a process solvent in the manufacture of an Active Pharmaceutical Ingredient: Flecainide acetate Commission decided
0060-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 BASF SE Industrial use as a recyclable solvent and extraction agent in a closed system for purification of 1,3,5-trioxane Commission decided
0094-01 Initial 2,2'-dichloro-4,4'-methylenedianiline (MOCA) 202-918-9 101-14-4 REACHLaw Ltd in its legal capacity as Only Representative of Suzhou Xiangyuan Special Fine Chemical Co., Ltd Industrial use of MOCA as a curing agent/chain extender in cast polyurethane elastomer production Opinions adopted
0225-02 Initial 4,4'-methylenebis[2-chloroaniline] 202-918-9 101-14-4 Limburgse Urethane Castings NV Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for heavy-duty rollers, tensioner pads and spring blocks with high reliability requirements for offshore energy and renewables sectors. Opinion development
0225-01 Initial 4,4'-methylenebis[2-chloroaniline] 202-918-9 101-14-4 Limburgse Urethane Castings NV Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for custom-made rollers with high reliability requirements for steel and aluminium sectors. Opinion development
0007-02 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Roxel (UK Rocket Motors) Ltd Industrial use of DBP in manufacture of solid propellants and motor charges for rockets and tactical missiles Authorisation expired
0005-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided
0005-03 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Industrial use of DBP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements Authorisation expired
0007-03 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Roxel (UK Rocket Motors) Ltd Industrial use of DBP within a specialty paint in manufacture of motors for rockets and tactical missiles Authorisation expired
0126-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 AVX Limited Industrial use in the manufacture of ceramic sheets for the production of multi-layer ceramic capacitors. Commission decided
0006-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Sasol-Huntsman GmbH & Co. KG Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided
0005-02 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP in propellants
Formulation: Industrial use of DBP as a burning rate surface moderant, plasticiser and/or coolant in the formulation of nitrocellulose-based propellant grains.
Use at industrial site: Industrial use of DBP-containing propellant grains in manufacture of ammunition for military and civilian uses, and pyrocartridges for aircraft ejection seat safety systems [includes propellants for police force ammunition and excludes propellants intended for manual, private reloading of ammunition cartridges by civilian users, i.e., licensed individual sports shooters and hunters. No direct consumer use of DBP or its mixtures is covered by this Use.]
Commission decided
0024-04 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use of tricholoroethylene in formulation Commission decided
0208-01 Review report Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG Industrial use of trichloroethylene as process chemical (enclosed systems) in Alcantara Material production Opinions adopted
0018-01 Initial Trichloroethylene 201-167-4 79-01-6 ROQUETTE Frères Use of trichloroethylene as a processing aid in the biotransformation of starch to obtain betacyclodextrin Commission decided
0024-01 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use Of Trichloroethylene in Industrial Parts Cleaning by Vapour Degreasing in Closed Systems where specific requirements (system of use-parameters) exist Authorisation expired
0026-02 Initial Trichloroethylene 201-167-4 79-01-6 Richard Geiss GmbH Use of tricholoroethylene in packaging Commission decided
0023-01 Initial Trichloroethylene 201-167-4 79-01-6 A.L.P.A.-AZIENDA LAVORAZIONE PRODOTTI AUSILIARI S.P.A.; CAFFARO INDUSTRIE S.P.A Use of trichloroethylene as solvent in the synthesis of vulcanization accelerating agents for fluoroelastomers Commission decided
0016-01 Initial Trichloroethylene 201-167-4 79-01-6 Microporous GmbH Trichloroethylene used as degreasing solvent in the manufacture of polyethylene separators for lead-acid batteries Commission decided
0019-01 Initial Trichloroethylene 201-167-4 79-01-6 Parker Hannifin Manufacturing Netherlands (Filtration & Separation) BV Use of trichloroethylene (TCE) as a process solvent for the manufacturing of modules containing hollow fibre gas separation membranes Commission decided
0024-03 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use of tricholoroethylene in packaging Commission decided
0024-05 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use of Trichloroethylene as Extraction Solvent for Bitumen in Asphalt Analysis Commission decided
0027-01 Initial Trichloroethylene 201-167-4 79-01-6 RAG Aktiengesellschaft, RAG Anthrazit Ibbenbüren GmbH Use of Tricholoroethylene-containing vulcanising and bonding agents for endless connections and repair of chloroprene rubber coated conveyor belts in underground hard coal mining Authorisation expired
0025-01 Initial Trichloroethylene 201-167-4 79-01-6 Chimcomplex S.A. Borzesti Industrial use of trichloroethylene (TCE) as a solvent as a degreasing agent in closed systems Authorisation expired
0129-01 Review report Trichloroethylene 201-167-4 79-01-6 SPOLANA s.r.o. [name of applicant in the original application: SPOLANA a.s. updated due to a notified change of corporate name] Use as an extraction solvent in caprolactam production Commission decided
0014-01 Initial Trichloroethylene 201-167-4 79-01-6 Vlisco Netherlands BV Use of trichloroethylene as a solvent for the removal and recovery of resin from dyed cloth Commission decided
0017-01 Initial Trichloroethylene 201-167-4 79-01-6 ENTEK International Limited – [Decision discontinued as of 01/01/2021] Trichloroethylene as an extraction solvent for removal of process oil and formation of the porous structure in polyethylene based separators used in lead-acid batteries Discontinued as of 01 January 2021
0020-01 Initial Trichloroethylene 201-167-4 79-01-6 DOMO Caproleuna GmbH Industrial use as an extraction solvent for the purification of caprolactam from caprolactam oil Commission decided
0021-01 Initial Trichloroethylene 201-167-4 79-01-6 Grupa Azoty S.A. Industrial use as a process chemical in caprolactam purification Commission decided
0022-01 Initial Trichloroethylene 201-167-4 79-01-6 SPOLANA a.s. Use as an extraction solvent in caprolactam production Commission decided
0024-02 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Industrial use as process chemical (enclosed systems) in Alcantara Material production Commission decided
0227-01 Review report Trichloroethylene 201-167-4 79-01-6 ROQUETTE Frères Use as a processing aid in the biotransformation of starch to obtain betacyclodextrin Opinion development
0014-02 Initial Trichloroethylene 201-167-4 79-01-6 Vlisco Netherlands BV Use of trichloroethylene as a solvent in a process to recover and purify resin from process water Commission decided
0026-01 Initial Trichloroethylene 201-167-4 79-01-6 Richard Geiss GmbH Use of tricholoroethylene in formulation Commission decided
0167-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Ireland
Abbott GmbH [name of applicant in the original application: Abbott GmbH & Co. KG updated due to a notified change of corporate name]
Industrial use as a surfactant in the formulation of In-Vitro Diagnostic Devices (IVDs) for clinical testing using ARCHITECT, Alinity and ABBOTT PRISM automated analyser systems. Opinions adopted
0171-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the formulation and filling of in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0178-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Baxter AG; Baxalta Belgium Manufacturing SA Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated (as a detergent) for virus inactivation via S/D (Solvent/Detergent) treatment in recombinant and plasma-derived medicinal products. Opinions adopted
0187-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - AGC Biologics A/S Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as Triton X-100 as detergent for the inactivation of viruses in the production of therapeutic proteins using mammalian cell hosts in projects where processes have been approved by the authorities (GMP compliant) Opinions adopted
0179-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its non-ionic detergent properties, consisting in the filling of 4-tert-OPnEO-containing solutions into specific single-use ampoules to be included in clinical and industrial in vitro testing applications as part of the BioFire and BioFire Next Gen FA products. Opinions adopted
0197-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - MERCK MILLIPORE LIMITED Industrial use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a surface-active ingredient for the production of two types of mixed cellulose ester membranes (lateral flow and microfiltration membranes). Opinions adopted
0143-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its non-ionic detergent to control the level of non-specific reactions in the formulation of in vitro reagents for clinical and industrial in vitro testing immunoassays. Opinions adopted
0154-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products Ltd - [Application void as of 01/01/2021] Use of IVD-wash solutions on diagnostic analyser systems Application void as of 01 January 2021
0159-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Nuova Ompi S.r.l. unipersonale Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for one specific medicinal product (NeoRecormon®) of one pharmaceutical company. Opinions adopted
0163-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Formulation of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) into enhancement solutions and DELFIA standard and maintenance solutions used in In Vitro Diagnostic assays and RUO products as well as maintenance of instruments as a critical ingredient for detection process while measuring europium (or other lanthanide) content of the assay solution Opinions adopted
0189-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Lonza Biologics Porriño, SL.
Lonza Biologics, plc. - [Application void as of 01/01/2021]
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated for virus inactivation via solvent/detergent treatment in the manufacture of recombinant medicinal active pharmaceutical ingredients (APIs) from mammalian cell cultures Opinions adopted
0186-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Beckman Coulter Ireland Inc.;
Immunotech S.R.O.;
Immunotech S.A.S.
Formulation of OPnEO solutions in European sites for use as laboratory products. Laboratory products are used as intermediate solutions for preparation of finished laboratory products (finished goods) or in-process use. Opinions adopted
0180-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Bio-Rad Industrial use of 4-tert-OPnEO for its non-ionic detergent property in the formulation of in vitro reagents dedicated to high-performance microbiological and immunological assays supported on microplates or magnetic particles Opinions adopted
0203-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. – OR5; Sealants Europe SAS; PPG Industries (UK) Ltd.; Boeing Distribution, Inc. – [Decision discontinued as of 01/01/2021]; Aviall UK Inc.; Wesco Aircraft EMEA Ltd (Poland); HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] The formulation of a hardener component containing OPE in Aerospace and Defence (A&D) two-part polysulphide sealants. Opinions adopted
0204-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Biokit S.A. Industrial use of 4-tert-OPnEO as a detergent in the preparation of reagents for incorporation into latex-based, ELISA and CLIA In-Vitro-Diagnostic kits. Opinion development
0141-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - SEBIA Industrial use of 4-tert-OPnEO for its wetting detergent properties in the production of buffers, reagents and gel supports allowing the dissolution, the dilution and the good spreading of substrates and reagents, necessary to optimize the functioning and the sensitivity of gel electrophoresis in vitro diagnostic tests. Opinions adopted
0141-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - SEBIA Industrial use of 4-tert-OPnEO for its detergent properties in the production of electrophoresis gels in view of ensuring the positioning of specific proteins necessary for the interpretation of results of gel electrophoresis in vitro diagnostic tests. Opinions adopted
0143-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its non-ionic detergent properties in the formulation of reagents for molecular clinical and industrial in vitro preparative and testing applications. Opinions adopted
0143-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its detergent properties, used for the extraction of biological material which is further formulated and intended for clinical and industrial in vitro testing applications. Opinions adopted
0145-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - BioMarin International Limited Industrial use as a surfactant to perform viral inactivation of biological proteins in the manufacture of a biopharmaceutical Final Bulk Drug Substance (FBDS) for an Enzyme Replacement Therapy (BMN250) for the treatment of Mucopolysaccharidosis IIIB (MPS IIIB). Opinions adopted
0160-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for medicinal products (NeoRecormon® and MIRCERA®). Opinions adopted
0168-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Diagnostics GmbH Professional use as a surfactant, in wash buffer components used in conjunction with Fluorescence In Situ Hybridisation (FISH) test kits and/or their Laboratory Developed Test (LDT) equivalents, in clinical diagnostic use for medical analysis of human tissue and blood samples to identify characteristic genetic abnormalities related to specific disease conditions. Opinions adopted
0169-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Janssen Vaccines & Prevention BV
Janssen Biologics B.V.
4-tert-Octylphenol ethoxylate is used as a lysing agent for the permeabilization of the host cell membrane to release adenovirus particles used for the manufacture of vaccines. Its use allows the selective elimination of enveloped adventitious viruses and is compatible with the chemicals needed to control the host cell DNA precipitation in the next process step. Opinions adopted
0173-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products Ltd Use of OPE as detergent in the production of bead components for in-vitro diagnostic kits for an immunoassay platform Opinions adopted
0174-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Hospira Zagreb d.o.o., a Pfizer company The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of one biopharmaceutical protein, a biosimilar product, used to prevent infection and neutropenic fevers. Opinions adopted
0186-06 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Beckman Coulter Ireland Inc.
Immunotech S.R.O
Immunotech S.A.S.
Beckman Coulter France S.A.S.
Beckman Coulter Česká republika s.r.o.
Beckman Coulter UK - [Application void as of 01/01/2021]
Beckman Coulter S.L.U
Beckman Coulter SPA Italy;
BC Distribution B.V
Downstream use of OPnEO-containing laboratory products designed for use in flow cytometry, genomics and particle characterization laboratory instruments and assays for quality control and research and development. Opinions adopted
0185-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX EUROPE B.V.;
IDEXX Montpellier SAS
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions Opinions adopted
0183-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGAST Industrial use of 4-tert-OPnEO for its amphiphilic, surfactant and non-haemolytic properties, to create controlled hydrophilic spots on porous hydrophobic membranes (solid form) for in vitro diagnostic kits for blood testing via antigen/antibody reaction in the following product ranges: ABTest Card®, ABD PAD® and M-TRAP® cartridges for the ONYX® system. Opinions adopted
0200-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH; STAT-Dx Life S.L. Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Opinion development
0200-07 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing Opinion development
0206-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Phadia GmbH; Thermo Fisher Scientific Baltics UAB Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB Opinion development
0192-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Pfizer Manufacturing Belgium NV The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant within a lubricant used in the manufacture of pharmaceutical drug products. Opinions adopted



Categories Display

Tagged as:

(click the tag to search for relevant content)


Route: .live2