Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

4.1 Description of first aid measures

General information: First aider: Pay attention to self-protection!

Inhalation: Remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen.

Skin contact: Wash off with plenty of water and soap for at least 15 minutes. Remove contaminated clothing and shoes. If irritation occurs or persists, get medical attention. Wash clothing and shoes before reuse.

In case of eye contact: After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately.

In case of ingestion: Call a physician immediately.

4.2 Most important symptoms and effects, both acute and delayed

Prolonged or repeated exposure can lead to habituation or addiction.

May increase toxic effects: Respiratory depression and sedation, Gastrointestinal disturbances. Overexposure may cause reproductive disorders based on tests with laboratory animals.

Continued use of barbiturates, even in therapeutic doses, may result in psychic or physical dependence. Abrupt withdrawal of the drug may result in a severe abstinence syndrome which includes grand mal seizures and delirium.  

4.3 Indication of immediate medical attention and special treatment needed

When symptoms suggesting toxicity, immediate medical treatment necessary. If possible, show this data sheet.

Fire-fighting measures

5.1 Extinguishing media

Water spray, carbon dioxide, dry chemical powder, foam.

5.2 Special hazards arising from the substance or mixture

In case of fire may be liberated: Carbon monoxide (CO), Nitrogen oxides (NOx).

5.3 Precautions for fire-fighters

Do not inhale explosion and combustion gases.

5.4 Further information

Contaminated fire extinguishing water must collect separately. It must not be discharged into drains.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Avoid generation of dust. Wear personal protection equipment. Wear breathing apparatus if exposed to vapours/dusts.

6.2 Environmental precautions

Do not allow to enter drains/surface water/ground-water.

6.3 Methods and materials for containment and cleaning up

Carefully take up dry. Vacuum residues. The material collected according to the section Disposal.

Handling and storage

7.1 Precautions for safe handling

All work processes must always be designed so that the following is as low as possible: Inhalation, Skin contact, Eye contact. Avoid generation of dust. The product is combustible and dust explosive.

The substance is registered under the Regulation EG1907/2006 (REACH) as a transported isolated intermediate; the use must be complied with the conditions in Article 18 (4).

7.2 Conditions for safe storage, including any incompatibilities

Provide adequate ventilation as well as local exhaustion at critical locations.

Keep container tightly closed and in a well-ventilated place. Do not store at temperatures above 30 °C.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
2811
Shipping information
Proper shipping name and description:
TOXIC SOLID, ORGANIC, N.O.S.
Chemical name:
Pentobarbital
Labels:
6.1
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
2811
Shipping information
Proper shipping name and description:
TOXIC SOLID, ORGANIC, N.O.S.
Chemical name:
Pentobarbital
Labels:
6.1
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
2811
Shipping information
Proper shipping name and description:
TOXIC SOLID, ORGANIC, N.O.S.
Chemical name:
Pentobarbital
Labels:
6.1
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
2811
Shipping information
Proper shipping name and description:
TOXIC SOLID, ORGANIC, N.O.S.
Chemical name:
Pentobarbital
Labels:
6.1
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.1 Control parameters

Limits for occupational safety are not be valid, because the substance must be used in closed system according to Article 18 (4) REACH. Exposures are therefore minimized.

8.2 Exposure controls

Appropriate engineering controls:

Immediately change contaminated clothing. Wash thoroughly after handling. General room ventilation is adequate unless the process generates dust or fumes. Work clothing should be removed in a change room on site and laundered professionally. Employees should shower and change into street clothes before leaving the facility. Prevent the accumulation of dust in the work area by thorough periodic cleaning of the area.

Personal protective equipment:

Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the hazardous substances handled. The resistance of the protective clothing to chemicals should be ascertained with the respective supplier.

Respiratory protection: Is required whenever air contamination (dust, mist, or vapors) is generated by the process. A NIOSH-approved high efficiency toxic dust/mist/fume respirator is recommended.

      Eye protection:       required

      Hand protection:       In full and splash contact:

      Glove material:       PVC, Butyl-/Nitrile rubber

      Layer thickness: 0.11 mm

The protective gloves to be used must comply with the specifications of EC directive 89/686/EEC and the resultant standard EN374.

This recommendation applies only to the product stated in the safe data sheet and supplied by us as well as to the purpose specified by us. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves.

Stability and reactivity

10.1 Reactivity

No special conditions

10.2 Chemical stability

Stable under normal conditions

10.3 Possibility of hazardous reactions

Oxidizing agents

10.4 Conditions to avoid

Light, Moisture (weak hygroscopic)

10.5 Incompatible materials

Bases

Disposal considerations

13.1 Waste treatment methods

Product:

Product waste and residues must be disposed of according to current laws.

Packaging:

Non-contaminated packages may be recycled. Handle contaminated packaging in the same way as the substance itself.