Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Ecotoxicological information

Toxicity to microorganisms

Currently viewing:

Administrative data

Link to relevant study record(s)

Referenceopen allclose all

Endpoint:
toxicity to microorganisms, other
Type of information:
experimental study
Adequacy of study:
supporting study
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
test procedure in accordance with national standard methods with acceptable restrictions
Qualifier:
no guideline followed
Principles of method if other than guideline:
Lumistox - luminescent bacteria test
GLP compliance:
not specified
Remarks:
Test before implementation of GLP
Test organisms (species):
Photobacterium phosphoreum
pH:
7.0
Key result
Duration:
30 min
Dose descriptor:
EC50
Effect conc.:
ca. 1 380 mg/L
Nominal / measured:
nominal
Conc. based on:
test mat.
Basis for effect:
other: bioluminescence
Validity criteria fulfilled:
not specified
Conclusions:
The EC50 of Guanidine Thiocyanate was determined to be 1380 mg/L (nominal).
Executive summary:

The acute toxicity to bacteria of Guanidine Thiocyanate was tested in a Bacterial Luminescence Assay (LUMIStox (Dr. Lange GmbH, Dusseldorf, Germany)).Cultures ofPhotobacterium phosphoreumwere exposed to 5 different concentrations for 30 min.The EC50 was determined to be 1380 mg/L (nominal) by bioluminescence measurement.

 

Results Synopsis

Test Organism:Photobacterium phosphoreum

Test Type:Bacterial Luminescence Assay (LUMIStox)

EC50:1380 mg/l (nominal)

Endpoint:
toxicity to microorganisms, other
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2000-04-04 to 2000-05-02
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Reason / purpose for cross-reference:
reference to same study
Qualifier:
according to guideline
Guideline:
other: OECD 302B guideline
GLP compliance:
yes
Specific details on test material used for the study:
Batch 1210.9225
Details on test solutions:
The test substance was dissolved at a concentration of 343 mg/I, in aerobic mineral salts medium according to OECD guideline 302 B equivalent to 70.9 mg/l DOC
Test organisms (species):
activated sludge of a predominantly domestic sewage
Details on inoculum:
Activated sludge from the aeration tank of a municipal biological waste water treatment plant, not adapted, not pre-conditioned. 0.2 g/L dry matter in the final mixture.
Prior to the test the sludge was washed twice with tap water.
Test type:
static
Water media type:
other: mineral salts medium according to OECD guideline 302 B
Total exposure duration:
28 d
Details on test conditions:
For each test series the following number of test flasks was set up:
Test suspension (T) 2 replicates: containing activated sludge + test medium + test substance
Inoculum blank (B), 2 replicas: containing activated sludge + test medium
Procedure control (R), 1 replicate: containing activated sludge + test medium + diethyleneglycol as ready biodegradable reference compound

The test vessels were stirred (100 r.p.m.) and aerated with synthetic CO2-free air for a maximum test period of 28 days.
The air leaving the individual vessels was passed through gas-absorption bottles filled with NaOH.
It was assured that during the test the oxygen concentration was > 6 mg/l.
The pHvalue was checked periodically and adjusted to pH 6.5-8.0 with NaOH or H2S04, if necessary.
The elimination of the test material was followed by DOC determinations at regular intervals.
First samples were analyzed at the beginning of and 3 h after starting the test.
The trapped CO2 was determined as inorganic carbon (IC).
Duration:
28 d
Dose descriptor:
EC50
Effect conc.:
> 185 mg/L
Conc. based on:
test mat.
Basis for effect:
other:
Remarks:
inhibition of degradation
Remarks on result:
other:
Remarks:
inocculum stayed active until day 28 with a remaining test material concentration of 185mg/L
Key result
Duration:
10 d
Dose descriptor:
EC10
Effect conc.:
200 mg/L
Nominal / measured:
estimated
Conc. based on:
test mat.
Basis for effect:
other: no inhibition of degradation
Details on results:
Based on the data of the individual DOC determinations the test substance reached a biodegradation of 46 % after 28 days, therefore the test substance is considered non-toxic to the activated sludge.
With an initial concentration of 343mg/L, 42% degradation was reached at day 10 (remaining concentration at day 10 ca. 200mg/L). It can be concluded that the activity of inocclum was not inhibited in a relevant way until day 10. This coresponds to a worst case EC10 effect concentration of 200mg/L.
Degradation continued until day 28 according to degradation curve. Based on the data of the individual DOC determinations the test substance reached a biodegradation of 46 % after 28 days, therefore the test substance is considered non-toxic to the activated sludge.
Validity criteria fulfilled:
not applicable
Conclusions:
Based on the data of the individual DOC determinations the test substance reached a biodegradation of 46 % after 28 days, therefore the test substance is considered non-toxic to the activated sludge. According to degradation curve, the inocculum was active until the end of test (28d). As most of degradation occured until day10 (42% degradation), 10d-EC10, as a worst case assumption, was estimated to be 200mg/L.

Description of key information

The acute toxicity to bacteria of Guanidine Thiocyanate was tested in a Bacterial Luminescence Assay (LUMIStox (Dr. Lange GmbH, Dusseldorf, Germany)).Cultures of Photobacterium phosphoreum were exposed to 5 different concentrations for 30 min. The EC50 was determined to be 1380 mg/L (nominal) by bioluminescence measurement.

 Based on a degradation test according to OECD302, 10d-EC10 was estimated to be 200 mg/L (based on test material concentration).

Key value for chemical safety assessment

EC10 or NOEC for microorganisms:
200 mg/L

Additional information