Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Flash point

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flash point of flammable liquids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
Jan. - Feb. 2020
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
EU Method A.9 (Flash-Point)
Version / remarks:
May 2008
Deviations:
no
Qualifier:
according to guideline
Guideline:
EPA OPPTS 830.6315 (Flammability)
Version / remarks:
August 1996
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Type of method:
non-equilibrium method closed cup
Flash point apparatus:
Pensky-Martens apparatus
Flash point:
> 170 °C
Atm. press.:
101 325 Pa
Remarks on result:
other: results were automatically corrected to 101325 Pa, no flashpoint was found up to decomposition, starting as of 140 °C

Safety Test Results - All observations recorded were as follows:

Condensate was visible starting as of 57 °C; Formation of bubbles with a large distance was visible, the colour became slight lilac and getting darker as of 146 °C; the heating plate was turned off at 170 °C. The test item remained as a violet liquid after cooling down and decomposition was considered.

Determination of the Flash Point - The results of the determinations were as follows.

Search Program: Setting temperature to 170 °C resulted in no flash point being detected while the test item produced a strong violet fume.

A second run with Search program set to 150 °C was initiated, but no flash point was detected, while fume was observed as of 140 °C.

EVALUATION AND RESULT AND DISCUSSION

No flash point was found in the first pre-test up to 170 °C.

For safety reasons a second pre-test was performed up to 150 °C (as the test item produced a strong violet fume up to 170 °C), and also no flash point was found. Therefore, no flash point can be stated for 1,3-Diiodopropane up to 170 °C. No observations were made which might cause doubts on the validity of the study out-come. Therefore, the result of the study is considered valid.

Interpretation of results:
GHS criteria not met
Conclusions:
No flash point was detected when investigated up to 170 °C; as of 140 °C decomposition started, producing violet fume (iodine?). Therefore, no flash point can be stated for 1,3-diiodopropane up to 170 °C.
Executive summary:

First, a safety test was performed with approx. 3 mL of the test item that was heated with a heating plate up to 170 °C. After cooling down the test item stayed as a violet liquid (decomposition was considered). Then, a pre-test was performed using a flashpoint tester. In the pre-test, no flash point was detected. Heating was performed up to 170 °C in the first pre-test. Furthermore, the test item produced strong violet fume and the experiment was stopped. For safety reason a second pre-test was conducted up to 150 °C (as the test item produced strong violet fume up to 170 °C), fume was observed since starting at 140 °C. Also, no flash point was detected. Therefore, no flash point can be stated for 1,3-Diiodopropane up to 170 °C.

Description of key information

No flash point was detected when investigated up to 170 °C; as of 140 °C decomposition started, producing violet fume (iodine?). Therefore, no flash point can be stated for 1,3-diiodopropane up to 170 °C.

Key value for chemical safety assessment

Additional information