Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

4.1 Description of first aid measures
General advice: Seek medical advice in case of symptoms caused by eye or
skin contact, inhalation or swallowing.
The hot molten liquid causes severe damage to the eyes and burns
If inhaled:
Bring affected person outside and ensure that he/she is comfortable.
In case of skin contact:
Change contaminated, soaked clothes.
Upon skin contact, wash with plenty of water and soap.
Following contact with hot product, cool quickly with cold water until pain ceases. Do not remove congealed product from the skin.
Call a physician immediately.
In case of eye contact:
Rinse thoroughly with plenty of water keeping eyelid open.
Remove contact lenses if this can be easily done.
If swallowed:
Rinse out mouth, spit out liquid.
Give small amounts of water to drink.
4.2 Most important symptoms and effects, both acute and delayed
None known.
4.3 Indication of any immediate medical attention and special treatment needed

Fire-fighting measures

5.1 Extinguishing media
Suitable extinguishing media:
Water spray, foam, CO2, dry powder.
5.2 Special hazards arising from the substance or mixture
Hazardous combustion products:
Carbon oxides
Nitrogen oxides (NOx)
Hydrocyanic acid (HCN)
hydrogen chloride (HCl)
5.3 Advice for firefighters
Special protective equipment for firefighters:
In the case of fire, wear respiratory protective equipment in-dependent of surrounding air and chemical protective suit.

Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions
:
Wear personal protective equipment; see section 8.
Ensure adequate ventilation.
Avoid dust formation.
6.2 Environmental precautions
Environmental precautions:
Product or extinguishing water with product must not be allowed to enter soil, sewers or natural bodies of water.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up:
Sweep up and shovel.
Avoid dust formation.
Melt:
Allow to solidify, use mechanical handling equipment.
Keep in suitable, closed containers for disposal.
6.4 Reference to other sections

Handling and storage

7.1 Precautions for safe handling
Advice on safe handling:
The substance must be handled under strictly controlled conditions according to Article 18 of the REACH regulation.
Provide sufficient ventilation and exhaust at the workplace.
Do not allow individual / bulk containers to stand open
Avoid dust formation.
Advice on protection against fire and explosion:
If dusts develop, explosive dust/air mixtures may form. When handling hot molten mass: Vapours can form explosive mixtures with air. Keep away from heat and sources of ignition. Take precautionary measures against static discharges.
Hygiene measures:
Do not breathe vapours/dust. Avoid contact with skin, eyes and clothing. Take off clothing and shoes contaminated with product. Clean before reuse. Do not eat, drink, smoke, or sniff while at work. Wash your hands and/or face before breaks and before termination of work. Keep away from food, drink and animal feedingstuffs.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
Keep containers tightly closed in a cool, well-ventilated place.
7.3 Specific end use(s)

Transport information

Land transport (UN RTDG/ADR/RID)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not regulated as a dangerous good

Inland waterway transport (UN RTDG/ADN(R))

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not regulated as a dangerous good

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not regulated as a dangerous good

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not regulated as a dangerous good
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.1 Control parameters
8.2 Exposure controls
Personal protective equipment
Eye protection:
Safety glasses
When handling hot molten mass:
Tightly fitting safety goggles
Hand protection
Material:
Nitrile rubber, Recommendation: Camatril 730
Break through time:10 min
Glove thickness:0,6 mm
Material:
Fluorinated rubber (Viton), Recommendation: Vitoject 890
Break through time:480 min
Glove thickness:0,7 mm
Remarks:When handling hot material, use heat resistant gloves.
Skin and body protection:
Protective clothing
Respiratory protection:
Do not inhale gases, vapours, aerosols or dust - use respiratory protection equipment.
Respirator with ABEK-P2 combination filter

Stability and reactivity

10.1 Reactivity
See section 10.3
10.2 Chemical stability
No decomposition if stored and applied as directed.
10.3 Possibility of hazardous reactions
Hazardous reactions:
No dangerous reactions known.
10.4 Conditions to avoid
Conditions to avoid:
When handling hot molten mass:
Keep away from sources of ignition - No smoking.
10.5 Incompatible materials
Materials to avoid:
Strong oxidizing agents
Strong acids
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. see section 5

Disposal considerations

13.1 Waste treatment methods
Product:
Must be brought to an adequate waste treatment facility, in conformity with applicable waste disposal regulations.
Contaminated packaging:
Packaging, that can not be reused after cleaning must be disposed or recycled in accordance with all federal, national and local regulations.