Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

· General information:
-Personal protection for the First Aider.
-Immediately remove any clothing soiled by the product.
-Take affected persons out of danger area and lay down.
-Position and transport stably in side position.
-Artificial respiration with respiration bag or respirator

· After inhalation:
-Take affected persons into fresh air and keep quiet.
-Seek medical treatment in case of complaints.

· After skin contact:
-Immediately wash with water and soap and rinse thoroughly.
-If skin irritation continues, consult a doctor.

· After eye contact:
-Rinse opened eye for several minutes under running water.
-In case of irritation consult an occulist .

· After swallowing:
-Rinse out mouth and then drink plenty of water.
-Vomiting, possible danger of aspiration, keep breathing passages free
-Induce vomiting only, if affected person is fully conscious.
-Seek medical treatment.

· Information for doctor:
· Most important symptoms and effects, both acute and delayed : No further relevant information available.

· Indication of any immediate medical attention and special treatment needed : No further relevant information available.

Fire-fighting measures

· Extinguishing media
· Suitable extinguishing agents : CO2, powder or water spray. Fight larger fire with alcohol resistant foam.

· Special hazards arising from the substance or mixture
-Nitrogen oxides (NOx)
-Hydrogen cyanide (HCN)
-Sulphur oxides (SOx)
-Carbon monoxide and carbon dioxide
-Danger of forming toxic pyrolysis products.

· Advice for firefighters
· Protective equipment:
-Wear fully protective suit.
-Do not inhale explosion gases or combustion gases.
-Self-contained respiratory protective device.

· Additional information : Collect contaminated fire fighting water separately. It must not enter the sewage system.

Accidental release measures

· Personal precautions, protective equipment and emergency procedures
-Use respiratory protective device against the effects of fumes/dust/aerosol.
-Wear protective equipment. Keep unprotected persons away.
-Keep away from ignition sources.

· Environmental precautions:
-Damp down dust with water spray.
-Do not allow to enter sewers/ surface or ground water.

· Methods and material for containment and cleaning up:
-Pick up mechanically.
-Dispose contaminated material as waste according to disposal considerations.
-Ensure adequate ventilation.

· Reference to other sections
-See for information on safe handling.
-See for information on personal protection equipment.
-See for disposal considerations.

Handling and storage

· Handling:
· Precautions for safe handling
-Ensure good ventilation/exhaustion at the workplace.
-Development and deposition of dust has to be avoided.

· Information about fire - and explosion protection:
-Keep ignition sources away - Do not smoke.
-Protect against electrostatic charges.
-Dust can combine with air to form an explosive mixture.

· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles : Store only in the original receptacle.
· Information about storage in one common storage facility:
-Do not store together with strong acids, alkalines and oxidation agents
· Further information about storage conditions:
-Store in cool, dry conditions in well sealed receptacles.
-Store receptacle in a well ventilated area.

· Recommended storage temperature : At 15 °C to 25 °C

· Specific end use(s) : No further relevant information available.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
void
Shipping information
Proper shipping name and description:
void
Chemical name:
1-Propanesulfonic acid, 3-[[(dimethylamino)thioxomethyl]thio]-, sodium salt
Language:
English
Labels:
void
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
void
Shipping information
Proper shipping name and description:
void
Chemical name:
1-Propanesulfonic acid, 3-[[(dimethylamino)thioxomethyl]thio]-, sodium salt
Language:
English
Labels:
void
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
void
Shipping information
Proper shipping name and description:
void
Chemical name:
1-Propanesulfonic acid, 3-[[(dimethylamino)thioxomethyl]thio]-, sodium salt
Labels:
void
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
void
Shipping information
Proper shipping name and description:
void
Chemical name:
1-Propanesulfonic acid, 3-[[(dimethylamino)thioxomethyl]thio]-, sodium salt
Labels:
void
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Not dangerous according to the above specifications

Exposure controls / personal protection

· Additional information about design of technical facilities:
-Take appropriate measures against dust.

· Control parameters
· Ingredients with limit values that require monitoring at the workplace : Not required.

· Additional information : The lists valid during the making were used as basis.

· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
-Do not inhale gases / fumes / aerosols / dust.
-Immediately remove all soiled and contaminated clothing.
-Avoid contact with the eyes and skin.
-Store protective clothing separately.

· Respiratory protection : In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
self-contained respiratory protective device.
· Recommended filter device for short term use : Filter FFP2

· Protection of hands: Protective gloves
· Material of gloves : Nitrile rubber, NBR, Recommended material strength: ≥ 0.11 mm
· Penetration time of glove material : Penetration time ≥ 8 h
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
· Not suitable are gloves made of the following materials:
-Leather gloves
-Strong material gloves

· Eye protection : Safety glasses

Stability and reactivity

· Reactivity
· Chemical stability
· Thermal decomposition / conditions to be avoided : No decomposition if used according to specifications.

· Possibility of hazardous reactions : Reacts with strong acids, alkalines and oxidizing agents.

· Conditions to avoid : No further relevant information available.

· Incompatible materials : No further relevant information available.

· Hazardous decomposition products:
-Nitrogen oxides (NOx)
-Hydrogen cyanide (prussic acid)
-Sulphur oxides (SOx)
-Carbon monoxide and carbon dioxide
-Danger of forming toxic pyrolysis products.

Disposal considerations

· Waste treatment methods
· Recommendation : Disposal considering to the local / regional / national / international regulations. Details have to be arranged with the authority concerned and / or the local waste management enterprise.

· Waste disposal key : Depending on the application intended by the consumer, the allocation of waste codes according to the European waste
catalogue has to be carried out in agreement with the waste disposal company and the authority.

· Uncleaned packaging:
· Recommendation:
-Packaging may be reused or recycled after cleaning.
-Packagings that may not be cleansed are to be disposed of in the same manner as the product.

· Recommended cleansing agents : Water, if necessary together with cleansing agents.