Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Inhalation: Move exposed person to fresh air. Keep person warm and at rest.

If not breathing, if breathing is irregular or if respiratory arrest

occurs, provide artificial respiration or oxygen by trained personnel.

It may be dangerous to the person providing aid to give mouth-tomouth

resuscitation. Get medical attention if adverse health

effects persist or are severe. If unconscious, place in recovery

position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Ingestion: Wash out mouth with water. Move exposed person to fresh air.

Keep person warm and at rest. If material has been swallowed

and the exposed person is conscious, give small quantities of

water to drink. Stop if the exposed person feels sick as vomiting

may be dangerous. Do not induce vomiting unless directed to do

so by medical personnel. If vomiting occurs, the head should be

kept low so that vomit does not enter the lungs. Get medical

attention if adverse health effects persist or are severe. Never give

anything by mouth to an unconscious person. If unconscious,

place in recovery position and get medical attention immediately.

Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Skin contact: Flush contaminated skin with plenty of water. Remove

contaminated clothing and shoes. Continue to rinse for at least 10

minutes. Get medical attention. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the

upper and lower eyelids. Check for and remove any contact

lenses. Continue to rinse for at least 10 minutes. Get medical attention.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media: In case of fire, use water spray (fog), foam, dry chemical or CO2.

Unsuitable extinguishing media: None known.

Special hazards arising from the substance or mixture

Hazards from the substance or mixture: No specific fire or explosion hazard.

Hazardous combustion products: Decomposition products may include the following materials:

carbon oxides

halogenated compounds

Advice for firefighters

Special precautions for fire-fighters: Promptly isolate the scene by removing all persons from the

vicinity of the incident if there is a fire. No action shall be taken

involving any personal risk or without suitable training.

Special protective equipment for fire-fighters: Fire-fighters should wear appropriate protective equipment and selfcontained

breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Remark: Cool closed containers exposed to fire with water. Do not release runoff from fire to drains or watercourses.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: No action shall be taken involving any personal risk or without

suitable training. Keep unnecessary and unprotected personnel

from entering. Do not touch or walk through spilt material. Provide

adequate ventilation. Put on appropriate personal protective equipment.

Environmental precautions: Avoid dispersal of spilt material and runoff and contact with soil,

waterways, drains and sewers. Inform the relevant authorities if

the product has caused environmental pollution (sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

Small spill: Move containers from spill area. Vacuum or sweep up material and

place in a designated, labelled waste container. Dispose of via a licensed waste disposal contractor.

Large spill: Move containers from spill area. Prevent entry into sewers, water

courses, basements or confined areas. Vacuum or sweep up

material and place in a designated, labelled waste container.

Dispose of via a licensed waste disposal contractor.

Handling and storage

Manufacture and use of this chemical intermediate takes place under strictly controlled conditions, as described in Art. 17/18 REACH. The substance is rigorously contained during manufacturing and use and appropriate risk management measures including PPE (i.g. during charging or sampling) are applied. Occupational exposure is reduced to a minimum and well controlled by measurements. A management system covering all general aspects of a chemical production is in place, especially cleaning and maintenance of plants and equipment. An authorisation scheme based on instructions covering the whole process ensures that only trained and authorised staff handles the substance.

Precautions for safe handling:

Put on appropriate personal protective equipment.

Eating, drinking and smoking should be prohibited in areas where

this material is handled, stored and processed. Workers should

wash hands and face before eating, drinking and smoking. Do not

ingest. Avoid contact with eyes, skin and clothing. Keep in the

original container or an approved alternative made from a

compatible material, kept tightly closed when not in use. Empty

containers retain product residue and can be hazardous. The

product is registered with strictly controlled conditions as defined in

Article 17(3) or 18(4) of regulation (EC) no. 1907/2006 (REACH

Regulation) and must therefore be handled as such. Refer to the

industry guidance prepared by Concawe/Cefic/EFCG for advice on the confirmation of strictly controlled conditions.

Conditions of safe storage, including any incompatibilities: Store in accordance with local regulations. Store in original

container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and food and drink.

Keep container tightly closed and sealed until

ready for use. Containers that have been opened must be carefully

resealed and kept upright to prevent leakage. Do not store in

unlabelled containers. Use appropriate containment to avoid environmental contamination.

Remarks: Avoid the formation of dust, if necessary siphoning the product off

locally. Vent waste air only via suitable separators or scrubbers.

Take precautionary measures against electrostatic discharges.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

Exposure limit values: Not available.

Recommended monitoring procedures: If this product contains ingredients with exposure limits, personal,

workplace atmosphere or biological monitoring may be required to

determine the effectiveness of the ventilation or other control

measures and/or the necessity to use respiratory protective

equipment. Reference should be made to monitoring standards,

such as the following: European Standard EN 689 (Workplace

atmospheres - Guidance for the assessment of exposure by

inhalation to chemical agents for comparison with limit values and

measurement strategy) European Standard EN 14042 (Workplace

atmospheres - Guide for the application and use of procedures for

the assessment of exposure to chemical and biological agents)

European Standard EN 482 (Workplace atmospheres - General

requirements for the performance of procedures for the

measurement of chemical agents) Reference to national guidance

documents for methods for the determination of hazardous substances will also be required.

Exposure controls

Risk management measures

Occupational exposure controls

Technical measures: The substance shall be rigorously contained by technical means

during its whole lifecycle including manufacture, purification,

cleaning and maintenance of equipment, sampling, analysis,

loading and unloading of equipment or vessels, waste disposal or

purification and storage. Procedural and control technologies shall

be used that minimise emission and any resulting exposure. In

cases of accident and where waste is generated, procedural and/

or control technologies shall be used to minimise emissions and

the resulting exposure during purification or cleaning and

maintenance procedures.

Organisational measures: Only properly trained and authorised personnel shall handle the subtsance. In the case of

cleaning and maintenance works, special procedures such as purging and washing shallbe

applied before the system is opened and entered.

Personal protection measures

Respiratory protection:

If exposure cannot be ruled out, e.g. during product transfer,

sampling or maintenance, a well-fitting respiratory mask

conforming to standards or well-fitting respiratory device

conforming to standards must be worn. Respirator selection must

be based on known or anticipated exposure levels, the hazards of

the product and the safe working limits of the selected respirator.

Recommended: In case of dust formation particle filter P2.

Hand protection: Chemical-resistant, impervious gloves complying with an approved

standard should be worn at all times when handling chemical

products if product contact cannot be excluded. After

contamination with product change the gloves immediately and

dispose of them according to relevant national and local

regulations

Recommended: (< 1 hour) PVC - or rubber gloves

Eye protection: Safety eyewear complying with an approved standard should be

used to avoid exposure to liquid splashes, mists, gases or dusts.

Recommended: Tightly fitting safety goggles.

Skin protection: Wear protective clothing. Personal protective equipment for the

body should be selected based on the task being performed and

the risks involved and should be approved by a specialist before handling this product.

Recommended: Wear protective clothing.

Hygiene measures: Wash hands, forearms and face thoroughly after handling

chemical products, before eating, smoking and using the lavatory

and at the end of the working period. Appropriate techniques

should be used to remove potentially contaminated clothing. Wash

contaminated clothing before reusing. Ensure that eyewash

stations and safety showers are close to the workstation location.

Environmental exposure controls

Technical measures: Emissions from ventilation or work process equipment should be

checked to ensure they comply with the requirements of

environmental protection legislation. In some cases, special waste

water treatment, fume scrubbers, filters or engineering

modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Stability and reactivity

Reactivity: No specific test data related to reactivity available for this product or its ingredients.

Chemical stability: The product is stable.

Possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions will not occur.

Conditions to avoid: Keep away from: alcohols , amines , water and alkalis. Keep away from metals. Corrosive to metal.

Incompatible materials: No specific data.

Hazardous decomposition products: Under normal conditions of storage and use, hazardous

decomposition products should not be produced.

Disposal considerations

Waste treatment methods

Product

Methods of disposal: Examine possibilities for re-utilisation. Product residues and

uncleaned empty containers should be packaged, sealed, labelled,

and disposed of or recycled according to relevant national and

local regulations. Where large quantities are concerned, consult

the supplier. When uncleaned empty containers are passed on,

the recipient must be warned of any possible hazard that may be

caused by residues. For disposal within the EC, the appropriate

code according to the European Waste List (EWL) should be used.

It is among the tasks of the polluter to assign the waste to waste

codes specific to industrial sectors and processes according to the European Waste List (EWL).

Hazardous waste: The classification of the product may meet the criteria for a hazardous waste.

Packaging

Methods of disposal:  The generation of waste should be avoided or minimised wherever

possible. Waste packaging should be recycled. Incineration or

landfill should only be considered when recycling is not feasible.

Special precautions: This material and its container must be disposed of in a safe way.

Care should be taken when handling emptied containers that have

not been cleaned or rinsed out. Empty containers or liners may

retain some product residues. Avoid dispersal of spilt material and

runoff and contact with soil, waterways, drains and sewers.