Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 263-606-6 | CAS number: 62570-50-7
Partition coefficient
Administrative data
Link to relevant study record(s)
- Endpoint:
- partition coefficient
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.8 (Partition Coefficient - Shake Flask Method)
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 107 (Partition Coefficient (n-octanol / water), Shake Flask Method)
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 830.7550 (Partition Coefficient, n-octanol / H2O, Shake Flask Method)
- GLP compliance:
- yes
- Type of method:
- flask method
- Partition coefficient type:
- octanol-water
- Analytical method:
- other: Shake flask method
- Key result
- Type:
- log Pow
- Partition coefficient:
- > 2.4
- Temp.:
- 20 °C
- pH:
- ca. 7
- Type:
- Pow
- Partition coefficient:
- > 250
- Temp.:
- 20 °C
- pH:
- ca. 7
- Details on results:
- The analysed concentration of the stock solution was 0.00865 g/L. Based on this the nominal quantity of the test item in the test samples was 0.0173 mg. The recoveries were determined according to this value.
The log Pow values were not within the criterion range of ± 0.3 log units, i.e. 0.4 log units. Since the difference was relatively small and the obtained values were not specific, it was considered to have no impact on the outcome of the study. Based on this, the Pow and logPow of the test item is given ad the mean value of all measurements.
No test item was detected in the pretreated samples from the blank mixture - Conclusions:
- Partition coefficient was determined via the shake flask method at a pH of 7.
The Pow value of the test item at 20°C was > 250 which corresponds to a logPow value of >2.4 - Executive summary:
Partition coefficient was determined via the shake flask method at a pH of 7.
The Pow value of the test item at 20°C was > 250 which corresponds to a logPow value of >2.4
Reference
Description of key information
Partition coefficient was determined via the shake flask method at a pH of 7.
The Pow value of the test item at 20°C was > 250 which corresponds to a logPow value of >2.4
Key value for chemical safety assessment
- Log Kow (Log Pow):
- 2.4
- at the temperature of:
- 20 °C
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
