Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 289-214-5 | CAS number: 86261-90-7
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures:
Remove contaminated clothing.
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention.
On skin contact:
Wash off thoroughly with ample water. If irritation develops, seek medical attention.
On contact with eyes:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
On ingestion:
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Fire-fighting measures
Suitable extinguishing media:
dry powder, foam, water spray, carbon dioxide
Special hazards arising from the substance or mixture:
Advice: The product is combustible. Risk of violent self-polymerization if overheated in a container. Cool endangered containers with water-spray.
Advice for fire-fighters:
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
In case of a fire in the vicinity a restabilization system should be used if the temperature in the storage container reaches 45°C. Evacuate area of all unnecessary personnel. In case of a fire in the vicinity evacuate all personnel in a greater area if the temperature in the storage container reaches 60°C.
Accidental release measures
Release of substance/product can cause fire or explosion.
Personal precautions, protective equipment and emergency procedures:
Ensure adequate ventilation. Use personal protective clothing. Breathing protection required. Take appropriate protective measures
Environmental precautions:
Do not discharge into drains/surface waters/groundwater. Contain contaminated water/firefighting water.
Methods and material for containment and cleaning up:
For large amounts: Pump off product.
For residues: Pick up with suitable absorbent material.
Clean contaminated floors and objects thoroughly with water and detergents, observing environmental regulations. Dispose of absorbed material in accordance with regulations.
Handling and storage
Precautions for safe handling:
Handle in accordance with good industrial hygiene and safety practice. The substance/ product may be handled only by appropriately trained personnel. Provide basic employee training to prevent/minimize exposures. Facility parts must be checked for polymer residues and cleaned on regular basis in order to avoid hazardous reactions.
Ensure thorough ventilation of stores and work areas. When filling, transferring, or emptying of containers, adequate local exhaust ventilation is necessary. Vent waste air to atmosphere only through suitable separators. Check the condition of seals and connector screw threads. Do not open warm or swollen product containers. Remove persons to safety and alert fire brigade.
The temperatures which must be avoided are to be considered. Protect against heat. Protect contents from the effects of light. Protect from direct sunlight.
Ensure adequate inhibitor and dissolved oxygen level.
Ensure that there is no crystallized product in the container before use. Obtain Information from supplier/ manufacturer before dissolving totally or partially crystallized product. The ambient temperature of the container may not exceed the stated temperature limit when melting the product or keeping it at moderate temperature.
Protection against fire and explosion:
Substance/product can form explosive mixture with air. Ground all transfer equipment properly to prevent electrostatic discharge. Avoid all sources of ignition: heat, sparks, open flame. Vapours may form explosive mixture with air. Ignitable mixtures can be formed in the emptied container. Containers should be grounded against electrostatic charge. It is recommended that all conductive parts of the machinery are grounded.
Heated containers should be cooled to prevent polymerization. Emergency cooling must be provided for the eventuality of a fire in the vicinity. Sealed containers should be protected against heat as this results in pressure build-up. If exposed to fire, keep containers cool by spraying with water. Avoid influence of heat.
Conditions for safe storage, including any incompatibilities:
Further information on storage conditions: Prior to storage ensure that the transfer equipment used and the intended storage containers do not contain other substances/products. Before transfer to stock the identity of the product must be proved to be without doubt. The entrance to storage rooms is to be granted only to appropriately trained personnel.
The stabilizer is only effective in the presence of oxygen. Maintain contact with atmosphere containing 5 - 21% oxygen. Never use tanks with inert-gas installation for storage.
Risk of polymerization. Protect against heat. Protect contents from the effects of light. Avoid UV-light and other radiation with high energy. Protect against contamination.
All storage containers should at least be equipped with two high temperature alert devices.
Even if the product is stored and handled as prescribed/indicated it should be used up within the indicated duration of storage.
Do not store product below the indicated minimum temperature, because crystallization should be absolutely avoided.
Storage stability:
Storage temperature: 10 - 35 °C
Storage duration: 12 Months
The stated storage temperature should be noted.
Avoid prolonged storage.
Ensure adequate inhibitor and dissolved oxygen level.
The product is stabilized, the shelf life should be noted.
Storage temperature: 45 °C
A restabilization system should be used if the temperature in the storage container reaches the indicated value.
Storage temperature: 60 °C
All personnel in a greater area should be evacuated if the temperature in the storage container reaches the indicated value.
Do not store with less than 10 % headspace above liquid.
Storage stability is based upon ambient temperatures and conditions described.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Personal protective equipment:
Respiratory protection:
Wear respiratory protection if ventilation is inadequate. Suitable respiratory protection for lower concentrations or short-term effect: Gas filter for gases/vapours of organic compounds (boiling point >65 °C, e. g. EN 14387 Type A)
Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials for short-term contact (recommended: At least protective index 2, corresponding > 30 minutes of permeation time according to EN 374) butyl rubber (butyl) - 0.7 mm coating thickness
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Manufacturer's directions for use should be observed because of great diversity of types.
Eye protection:
Tightly fitting safety goggles (splash goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures:
Wearing of closed work clothing is required additionally to the stated personal protection equipment. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with the skin, eyes and clothing.
Stability and reactivity
Reactivity:
Corrosion to metals: Corrosive effects to metal are not anticipated. The product has not been tested. The statement has been derived from substances/products of a similar structure or composition.
Chemical stability:
Possibility of hazardous reactions:
Explosion and fire hazard exists under confined conditions. Ignitable air mixtures can form when the product is heated above the flash point and/or when sprayed or atomized.
Risk of spontaneous and violent self-polymerization if inhibitor is lost or product is exposed to excessive heat. With unstabilised product, spontaneous polymerisation may occur e.g. through ambient heat. Polymerization coupled with heat formation. Polymerization produces gases which may burst closed or confined containers. Reactions may cause ignition.
Risk of spontaneous polymerization by oxygen depletion of the liquid phase.
Radical formation can cause exothermic polymerization. Reacts with peroxides and other radical components. Reacts with nitric acid.
Hazardous reactions in presence of mentioned substances to avoid.
The product is stabilized against spontaneous polymerization prior to despatch. The product is stable if stored and handled as prescribed/indicated.
Conditions to avoid:
Avoid heat. Avoid oxygen content above the product of less than 5 %. Avoid UV-light and other radiation with high energy. Avoid prolonged storage. Avoid inhibitor loss. Avoid excessive temperatures.
Incompatible materials:
Substances to avoid: radical formers, free radical initiators, peroxides, mercaptans, nitro-compounds, perborates, azides, ether, ketones, aldehydes, amines, nitrates, nitrites, oxidizing agents, reducing agents, strong bases, acid anhydrides, acid chlorides, concentrated mineral acids, metal salts, Inert gas
Hazardous decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated.
Disposal considerations
Must be sent to a suitable incineration plant, observing local regulations.
Contaminated packaging:
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
