Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 289-870-2 | CAS number: 90028-76-5 Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Abies alba, Pinaceae.
Guidance on Safe Use
Administrative data
First-aid measures
4.1. Description of first aid measures
Do not leave affected person unattended.
Remove victim out of the danger area.
Provide fresh air.
Remove contaminated, saturated clothing immediately.
After contact with skin, wash immediately with plenty of water and soap.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding
eyelids apart and consult an ophthalmologist.
If swallowed rinse mouth. Do NOT induce vomiting.
4.2. Most important symptoms and effects, both acute and delayed
Observe risk of aspiration if vomiting occurs.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
Fire-fighting measures
5.1. Extinguishing media
Foam
Extinguishing powder
Carbon dioxide (CO2)
Avoid full water jet
5.2. Special hazards arising from the substance or mixture
B (Fires of liquids or liquid turning substances).
In case of fire toxic fumes like carbonmonoxide and carbondioxide may be liberated
Burning produces heavy smoke
5.3. Advice for firefighters
Move undamaged containers from immediate hazard area if it can be done safely.
Use suitable breathing apparatus.
Regard to self protection
Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Wear personal protection equipment.
Avoid contact with skin, eye and clothing.
Remove all sources of ignition.
Provide adequate ventilation.
Give a warning to persons in the hazard area
6.2. Environmental precautions
Do not allow to enter into surface water or drains.
Cover drains.
Prevent spread over a wide area (e.g. by containment or oil barriers).
6.3. Methods and material for containment and cleaning up
Absorb with liquid-binding material ( e.g. sand, diatomaceous earth, acid- or universal binding agents).
6.4. Reference to other sections
See protective measures under point 7 and 8.
Handling and storage
7.1. Precautions for safe handling
Provide earthing of containers, equipment, pumps and ventilation facilities.
Take precautionary measures against static discharges.
Wear personal protective clothing (see chapter 8).
Do not breathe gas/fume/vapour/spray.
Use only in well-ventilated areas.
When using do not eat, drink, smoke, sniff.
7.2. Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a cool, well-ventilated place.
7.3. Specific end use(s)
Unknown
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
8.1. Control parameters
No data available
8.2. Exposure controls
Technical measures and the application of suitable work processes have priority over personal protection
equipment.
Personal protection equipment:
Respiratory protection:
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be
worn.
Hand protection:
Use sovent and acid resistant protection gloves according to EN 374.
The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific
working place concentration and quantity of hazardous substances.
Take recovery periods for skin regeneration.
Eye protection:
Use protection goggles according to EN166.
Environmental exposure controls
See section 6 and 7
Stability and reactivity
10.1. Reactivity
Avoiding of strong oxidising agents, strong reducing agents, acids, bases, acid anhydride and alkali metals.
10.2. Chemical stability
Product is stable at room temperature.
10.3. Possibility of hazardous reactions
No dangerous reactions expected if used according to specifications.
10.4. Conditions to avoid
Temperatures more than room temperature will benefit the transfer from liquid to vapour phase and
formation of explosive atmospheres.
Storing the product in open containers will benefit the formation of peroxides and derogate the quality.
10.5. Incompatible materials
No data available
10.6. Hazardous decomposition products
No dangerous decomposition products known.
Disposal considerations
13.1. Waste treatment methods
Hazardous waste according to waste regulation
Dispose according to legislation.
Delivery to an approved waste disposal company.
Non-contaminated packages may be recycled.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
