Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 431-600-4 | CAS number: 112226-61-6
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Move subject to fresh air.
Emergency measure - Eyes: Flush eyes with large amount of water for at least 15
minutes. Consult a physician if irritation persists.
Emergency measure - Skin: Remove contaminated clothing. Wash affected skin areas
thoroughly with soap and water. Consult a physician if
irritation persists. Wash contaminated clothing thoroughly
before reuse. Do not take clothing home to be laundered.
Emergency measure - Ingestion: If swallowed, give 2 glasses of water to drink. See a
physician. Never give anything by mouth to an unconscious
person.
If swallowed, careful evacuation of the stomach is
advisable.
Fire-fighting measures
Recommended extinguishing agent: Use the following extinguishing media when fighting fires
involving this material: carbon dioxide, dry chemical, water
spray.
Product arising from burning: Combustion generates toxic fumes of the following: nitrogen
oxides, hydrogen chloride.
Product determined by test: N
Protective equipment: Wear self-contained breathing apparatus, pressure demand and
full protective gear.
Special Procedures: Remain upwind. Avoid breathing smoke.
Use water spray to cool containers exposed to fire. Contain
run-off
Accidental release measures
Emergency measures in case of spillage: Personal protection: appropriate protective equipment must
be worn when handling a spill of this material. See section
8, Exposure controls/Personal protection of attached Safety
Data Sheet for recommendations (Annex 4).
Remove all contaminated clothing promptly. Wash all exposed
skin areas with soap and water immediately after exposure.
Thoroughly launder clothing before reuse. Do not take
clothing home to be laundered.
Procedures:
Transfer spilled material to suitable containers for
recovery or disposal. Keep dust to a minimum. CAUTION: keep
spills and cleaning runoff out of municipal sewers and open
bodies of water.
Handling and storage
Handling: Do not handle material near food, feed or drinking water.
Avoid high concentrations of dust in air and accumulation of
dust on equipment. An airborne of this material can creat a
dust explosion. When handling and processing this material
local exhaust ventilation may be required to control dust
and reduce exposure to vapors. To prevent dust explosions
employ bonding and grounding for operations capable of
generating static electricity.
This material is a potential skin sensitizer.
Chemical-resistant gloves should be worn whenever this
material is handled.
Other:
Triple rinse (or equivalent) and puncture empty container.
Storage: Do not store this material near food, feed or drinking
water. Store in a well ventilated area. Store in a dry area.
Store out of direct sunlight in a cool place.
Packaging of the substance and or preparation: Steel drums kg 200.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport: Not Regulated for Transport.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Chemical reaction with water: None
Dust explosion: The dust explodability of RH-70,345 technical powder has
been measured. The 20 liter explosion severity (Kst) test
was performed.
Dust explosion determined by test: Y
Disposal considerations
Industry - Possibility of recovery/recycling: Treatment of solvent (n-butyl acetate) before re-using it in
the process:
The solvent (mother liquor) coming from the solid-liquid
separation is fully recycled; it is purified by distillation
and the distillation solid residue is drummed and sent to an
approved incineration facility.
Industry - Possibility of neutralisation: Absorb the spill with spill pillows or inert solids such as
clay or vermiculite and transfer contaminated materials to
suitable containers for disposal. Deactivate spill area with
freshly prepared solution of 5% sodium bicarbonate and 5%
sodium hypochlorite in water. Apply solution to the spill
area at a ratio of 10 volumes deactivation solution per
estimated volume of residual spill to deactivate any
residual a.i. Let stand for 30 minutes. Flush the spill area
with copious amount of water to chemical sewer. Do not add
deactivation solution to the waste pail to deactivate the
adsorbed material.
Industry - Possibility of destruction: controlled discharge: No
Industry - Possibility of destruction - incineration: Yes
Industry - Possibility of destruction - water purification: The liquid wastes are pre-treated (by oxidation with
hydrogen peroxide and then by solvent extraction) to remove
any organic product and by-product before being sent to
municipal WWT.
Public at large - Possibility of recovery/recycling: Not applicable. No sales to public at large.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
