Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 455-560-2 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
4.1 Description of first aid measures
General advice:
Move out of dangerous area.
Consult a physician.
Show this safety data sheet to the doctor in attendance.
If inhaled:
If breathed in, move person into fresh air.
Consult a physician after significant exposure.
In case of skin contact:
Take off contaminated clothing and shoes immediately.
Rinse immediately with plenty of water.
In case of eye contact:
Rinse with plenty of water.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed:
Clean mouth with water and drink afterwards plenty of water.
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
Obtain medical attention.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms:
The symptoms and effects are as expected from the hazards as shown in section 2. No specific product related symptoms are known.
Risks:
Harmful if swallowed.
4.3 Indication of any immediate medical attention and special treatment needed
Treatment:
Treat symptomatically.
General advice:
Move out of dangerous area.
Consult a physician.
Show this safety data sheet to the doctor in attendance.
If inhaled:
If breathed in, move person into fresh air.
Consult a physician after significant exposure.
In case of skin contact:
Take off contaminated clothing and shoes immediately.
Rinse immediately with plenty of water.
In case of eye contact:
Rinse with plenty of water.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed:
Clean mouth with water and drink afterwards plenty of water.
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
Obtain medical attention.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms:
The symptoms and effects are as expected from the hazards as shown in section 2. No specific product related symptoms are known.
Risks:
Harmful if swallowed.
4.3 Indication of any immediate medical attention and special treatment needed
Treatment:
Treat symptomatically.
Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Specific hazards during firefighting / Specific hazards arising from the chemical:
CAUTION: reignition may occur.
Supports combustion.
Water spray may be ineffective unless used by experienced firefighters.
Do not allow run-off from fire fighting to enter drains or water courses.
Heating may cause decomposition with release of toxic fumes.
Combustion products:
Fire will produce smoke containing hazardous combustion products (see section 10).
5.3 Advice for firefighters
Special protective equipment for firefighters:
In the event of fire, wear self-contained breathing apparatus.
Further information:
Use water spray to cool unopened containers.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Specific hazards during firefighting / Specific hazards arising from the chemical:
CAUTION: reignition may occur.
Supports combustion.
Water spray may be ineffective unless used by experienced firefighters.
Do not allow run-off from fire fighting to enter drains or water courses.
Heating may cause decomposition with release of toxic fumes.
Combustion products:
Fire will produce smoke containing hazardous combustion products (see section 10).
5.3 Advice for firefighters
Special protective equipment for firefighters:
In the event of fire, wear self-contained breathing apparatus.
Further information:
Use water spray to cool unopened containers.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions:
Use personal protective equipment.
Ensure adequate ventilation.
Remove all sources of ignition.
Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
6.2 Environmental precautions
Environmental precautions:
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
6.3 Methods and materials for containment and cleaning up
Methods for cleaning up / Methods for containment:
Keep wetted with water.
Soak up with inert absorbent material and dispose of as hazardous waste.
Confinement must be avoided.
Never return spills in original containers for re-use.
6.4 Reference to other sections
Additional advice:
For personal protection see section 8.
Personal precautions:
Use personal protective equipment.
Ensure adequate ventilation.
Remove all sources of ignition.
Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
6.2 Environmental precautions
Environmental precautions:
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
6.3 Methods and materials for containment and cleaning up
Methods for cleaning up / Methods for containment:
Keep wetted with water.
Soak up with inert absorbent material and dispose of as hazardous waste.
Confinement must be avoided.
Never return spills in original containers for re-use.
6.4 Reference to other sections
Additional advice:
For personal protection see section 8.
Handling and storage
7.1 Precautions for safe handling
Advice on safe handling:
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the application area.
Container may be opened only under exhaust ventilation hood.
Open drum carefully as content may be under pressure.
Dispose of rinse water in accordance with local and national regulations.
Advice on protection against fire and explosion:
Use explosion protected equipment.
Avoid formation of aerosol.
Keep away from sources of ignition - No smoking.
No sparking tools should be used.
Keep away from reducing agents (e.g. amines), acids, alkalies and heavy metal compounds (e.g. accelerators, driers, metal soaps).
Do not cut or weld on or near this container even when empty.
Take measures to prevent the build up of electrostatic charge.
Keep away from combustible material.
Temperature class:
It is recommended to use electrical equipment of temperature group T3. However, autoignition can never be excluded.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
No smoking.
Keep in a well-ventilated place.
Electrical installations / working materials must comply with the technological safety standards.
Keep only in original container.
Store away from other materials.
Minimum storage temperature::
Avoid temperatures below: 15 °C
Maximum storage temperature::
40 °C
Other data:
If product freezes or separates, contact Akzo Nobel:
No decomposition if stored and applied as directed.
7.3 Specific end use(s)
Specific use(s):
Consult the technical guidelines for the use of this substance/mixture.
Advice on safe handling:
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the application area.
Container may be opened only under exhaust ventilation hood.
Open drum carefully as content may be under pressure.
Dispose of rinse water in accordance with local and national regulations.
Advice on protection against fire and explosion:
Use explosion protected equipment.
Avoid formation of aerosol.
Keep away from sources of ignition - No smoking.
No sparking tools should be used.
Keep away from reducing agents (e.g. amines), acids, alkalies and heavy metal compounds (e.g. accelerators, driers, metal soaps).
Do not cut or weld on or near this container even when empty.
Take measures to prevent the build up of electrostatic charge.
Keep away from combustible material.
Temperature class:
It is recommended to use electrical equipment of temperature group T3. However, autoignition can never be excluded.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
No smoking.
Keep in a well-ventilated place.
Electrical installations / working materials must comply with the technological safety standards.
Keep only in original container.
Store away from other materials.
Minimum storage temperature::
Avoid temperatures below: 15 °C
Maximum storage temperature::
40 °C
Other data:
If product freezes or separates, contact Akzo Nobel:
No decomposition if stored and applied as directed.
7.3 Specific end use(s)
Specific use(s):
Consult the technical guidelines for the use of this substance/mixture.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- UN 3107
Shippingopen allclose all
Special provisions / remarks
- Special provisions:
- Hazard identification number 539
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- UN 3107
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- UN 3107
Shipping information
- Proper shipping name and description:
- ORGANIC PEROXIDE TYPE E, LIQUID
(3,3,5,7,7-Pentamethyl-1,2,4-trioxepane) - Chemical name:
- 3,3,5,7,7-Pentamethyl-1,2,4-trioxepane
- Labels:
- 5.2
- Marine pollutant
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- UN 3107
Shipping information
- Proper shipping name and description:
- ORGANIC PEROXIDE TYPE E, LIQUID
(3,3,5,7,7-Pentamethyl-1,2,4-trioxepane) - Chemical name:
- 3,3,5,7,7-Pentamethyl-1,2,4-trioxepane
- Labels:
- 5.2
Special provisions / remarks
- Remarks:
- Packing instruction 570
SpecialProvisionsopen allclose all
Exposure controls / personal protection
8 Exposure controls
Engineering controls
Explosion proof ventilation recommended.
Effective exhaust ventilation system
Personal protective equipment
Respiratory protection:
In the case of vapour or aerosol formation use a respirator with an approved filter.
Filter A
Hand protection:
butyl-rubber
Neoprene
Eye protection:
Tightly fitting safety goggles
Skin and body protection:
Protective suit
Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice.
When using do not eat or drink.
When using do not smoke.
Wash hands before breaks and at the end of workday.
Environmental exposure controls
General advice:
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform respective authorities.
Engineering controls
Explosion proof ventilation recommended.
Effective exhaust ventilation system
Personal protective equipment
Respiratory protection:
In the case of vapour or aerosol formation use a respirator with an approved filter.
Filter A
Hand protection:
butyl-rubber
Neoprene
Eye protection:
Tightly fitting safety goggles
Skin and body protection:
Protective suit
Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice.
When using do not eat or drink.
When using do not smoke.
Wash hands before breaks and at the end of workday.
Environmental exposure controls
General advice:
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform respective authorities.
Stability and reactivity
10.1 Reactivity
Stable under normal conditions.
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No dangerous reaction known under conditions of normal use.
10.4 Conditions to avoid
Conditions to avoid:
A high degree of confinement must be avoided.
Heat, flames and sparks.
10.5 Incompatible materials
Materials to avoid:
Contact with the following incompatible materials will result in hazardous decomposition:
Acids and bases
Iron
Copper
Reducing agents
Heavy metals
Rust
Do not mix with peroxide accelerators, unless under controlled processing.
Use only stainless steel 316, PP, polyethylene or glass-lined equipment.
For queries regarding the suitability of other materials please contact the supplier.
10.6 Hazardous decomposition products
Hazardous decomposition products:
Acetone
Methane
Isopropyl acetate
3-Hydroxy-1,3-dimethylbutyl acetate
Thermal decomposition:
SADT - (Self accelerating decomposition temperature) is the lowest temperature at which self accelerating decomposition may occur with a substance in the packaging as used in transport. A dangerous self-accelerating decomposition reaction and, under certain circumstances, explosion or fire can be caused by thermal decomposition at and above the SADT. Contact with incompatible substances can cause decomposition below the SADT.
Self-Accelerating decomposition temperature (SADT):
120 °C
Stable under normal conditions.
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No dangerous reaction known under conditions of normal use.
10.4 Conditions to avoid
Conditions to avoid:
A high degree of confinement must be avoided.
Heat, flames and sparks.
10.5 Incompatible materials
Materials to avoid:
Contact with the following incompatible materials will result in hazardous decomposition:
Acids and bases
Iron
Copper
Reducing agents
Heavy metals
Rust
Do not mix with peroxide accelerators, unless under controlled processing.
Use only stainless steel 316, PP, polyethylene or glass-lined equipment.
For queries regarding the suitability of other materials please contact the supplier.
10.6 Hazardous decomposition products
Hazardous decomposition products:
Acetone
Methane
Isopropyl acetate
3-Hydroxy-1,3-dimethylbutyl acetate
Thermal decomposition:
SADT - (Self accelerating decomposition temperature) is the lowest temperature at which self accelerating decomposition may occur with a substance in the packaging as used in transport. A dangerous self-accelerating decomposition reaction and, under certain circumstances, explosion or fire can be caused by thermal decomposition at and above the SADT. Contact with incompatible substances can cause decomposition below the SADT.
Self-Accelerating decomposition temperature (SADT):
120 °C
Disposal considerations
13.1 Waste treatment methods
Product:
The product should not be allowed to enter drains, water courses or the soil.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Hazardous waste
Dispose of contents/container in accordance with local regulation.
Contaminated packaging:
Empty remaining contents.
Dispose of as unused product.
Do not burn, or use a cutting torch on, the empty drum.
Due to the high risk of contamination recycling/recovery is not recommended.
Follow all warnings even after the container is emptied.
Product:
The product should not be allowed to enter drains, water courses or the soil.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Hazardous waste
Dispose of contents/container in accordance with local regulation.
Contaminated packaging:
Empty remaining contents.
Dispose of as unused product.
Do not burn, or use a cutting torch on, the empty drum.
Due to the high risk of contamination recycling/recovery is not recommended.
Follow all warnings even after the container is emptied.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
