Co polymer of 2-methyl-2-adamantyl 2-methyl-2-propenoate, 2-

Guidance on Safe Use

First-aid measures

Emergency measure - Inhalation: Seek medical attention.

Emergency measure - Eyes: Irrigate open eye for 15 minutes under running water. Obtain

immediate medical attention.

Emergency measure - Skin: Seek medical attention.

Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Water spray, foam, carbon dioxide, or dry chemical powder

extinguisher should be used.

Product arising from burning: The substance is combustible and will burn if involved in a

fire, evolving noxious fumes (eg carbon oxides).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing

apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.

Wear appropriate personal protective equipment conforming to

the relevant national or international standards as

mentioned in section 2.3.10.

Avoid dust formation by damping down with water. Absorb

spillages of solutions with a suitable inert material (eg

sand or soil). Carefully transfer the spillage to waste

containers, or use a sealed industrial vacuum machine.

Containers filled with waste material must be labelled in

the same way as the original containers.

Clean the spillage area with water and detergent.

Dispose of waste material by incineration in accordance with

local regulations.

Handling and storage

Handling: The substance should be stored, handled and used in

conditions of good industrial hygiene and in conformity with

any local regulations in order to minimise exposure.

Engineering controls are necessary to reduce exposure to the

substance.

When exposure cannot be prevented or adequately controlled

appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate

international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical resistant clothing to Standard EN368

Eye protection to Standard EN166

When necessary appropriate respiratory protection should be

used. e.g. a dust mask conforming to EN149 FFP1.

The standards mentioned above should be regarded as a

minimum.

Storage: Store in a cool, dry, well-ventilated area.

Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: The preparation is packed into either one gallon (3.78

litres) or one quart (0.946 litre) bottles, which are then

put in a cardboard box.

Transport information

Shipping

SpecialProvisions

Shipping

Remarks

Marine transport (UN RTDG/IMDG)

Shipping

Remarks

Air transport (UN RTDG/ICAO/IATA)

Shipping

Special provisions / remarks

Remarks:

Transport: Do not expose to any UV light source.

SpecialProvisions

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None which is hazardous.

Dust explosion: There is a potential for dust explosion from the substance

as it is an organic powder. However it is only imported as a

liquid preparation.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery from minor spillages or accidental discharge is not

economically or technically feasible, and such waste

material will be disposed of by incineration or landfill.

In principle, it may be possible to recover larger spillages

of uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: None known.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with

inert material (eg sand or soil) may be disposed of by

landfill at an authorised tip in accordance with local

regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning

under controlled conditions at a licensed waste treatment

processor in accordance with local regulations. Stack gases

should be scrubbed, because noxious fumes (eg carbon,

oxides) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to

the sewage system or the aqueous environment. However,

adverse effects on sewage treatment systems would be

unlikely.

In the unlikely event that the substance should enter water

treatment systems, contaminated waste water should be

treated by means of flocculation precipitation. The

precipitated material should then be disposed of by

incineration.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.