Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 481-850-3 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: If symptoms are experienced, remove to fresh air and obtain
medical advice.
Emergency measure - Eyes: Flush with lukewarm water for 15 minutes. If irritation
persists, obtain medical attention.
Emergency measure - Skin: Wash with soap and plenty of water. If irritation persists,
obtain medical advice.
Emergency measure - Ingestion: Obtain medical advice immediately.
medical advice.
Emergency measure - Eyes: Flush with lukewarm water for 15 minutes. If irritation
persists, obtain medical attention.
Emergency measure - Skin: Wash with soap and plenty of water. If irritation persists,
obtain medical advice.
Emergency measure - Ingestion: Obtain medical advice immediately.
Fire-fighting measures
Recommended extinguishing agent: Water spray, foam, dry chemical, carbon dioxide gas.
Product arising from burning: Oxides of carbon and nitrogen and sulphur containing
compounds.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Fight the fire from a safe distance or protected location.
Product arising from burning: Oxides of carbon and nitrogen and sulphur containing
compounds.
Product determined by test: N
Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.
Fight the fire from a safe distance or protected location.
Accidental release measures
Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.
Wear suitable protective gloves. Wipe surfaces with wet
cloth or paper.
Do not release to sewer, surface water or groundwater.
Dispose of waste material in accordance with local
regulations.
Wear suitable protective gloves. Wipe surfaces with wet
cloth or paper.
Do not release to sewer, surface water or groundwater.
Dispose of waste material in accordance with local
regulations.
Handling and storage
Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to minimise exposure.
Engineering controls (mechanical ventilation) are necessary
to minimise exposure to the substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;
Chemical protective gloves to Standard EN374
Chemical protective clothing to Standard EN368
Eye protection to Standard EN166.
Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling
exposure, be suitable for the purpose, and conform to the
appropriate international or national standards, such as a
dust mask conforming to EN149 FFP1.
These measures should be regarded as a minimum.
The substance is manufactured in Japan and will be imported
into the EU only as a component of ink found in inkjet
printer cartridges. These cartridges are supplied directly
to consumers and commercial users, so specific measures
should not be required during normal use and cartridge
replacement.
Storage: The substance should be stored in a cool, dryl well-
ventilated area away from flames and sources of ignition.
Packaging of the substance and or preparation: Small plastic cartridges sealed with plastic film and
packaged in a cardboard box.
conditions of good industrial hygiene and in conformity with
any local regulations in order to minimise exposure.
Engineering controls (mechanical ventilation) are necessary
to minimise exposure to the substance.
When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;
Chemical protective gloves to Standard EN374
Chemical protective clothing to Standard EN368
Eye protection to Standard EN166.
Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling
exposure, be suitable for the purpose, and conform to the
appropriate international or national standards, such as a
dust mask conforming to EN149 FFP1.
These measures should be regarded as a minimum.
The substance is manufactured in Japan and will be imported
into the EU only as a component of ink found in inkjet
printer cartridges. These cartridges are supplied directly
to consumers and commercial users, so specific measures
should not be required during normal use and cartridge
replacement.
Storage: The substance should be stored in a cool, dryl well-
ventilated area away from flames and sources of ignition.
Packaging of the substance and or preparation: Small plastic cartridges sealed with plastic film and
packaged in a cardboard box.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: Not regulated.
Transport: Transport in well sealed and unbreakable containers, secured
from falling down. Label containers appropriately.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None reported
Chemical reaction with water: None reported.
Dust explosion: Under normal conditions of use this material does not
present a significant explosion hazard. However, like most
organic compounds it is combustible and may form a dust
explosion if widely dispersed in air.
However, dust explosion is not a hazard as the substance is
imported into the EU as a component of a liquid preparation.
Dust explosion determined by test: N
Chemical reaction with water: None reported.
Dust explosion: Under normal conditions of use this material does not
present a significant explosion hazard. However, like most
organic compounds it is combustible and may form a dust
explosion if widely dispersed in air.
However, dust explosion is not a hazard as the substance is
imported into the EU as a component of a liquid preparation.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Recovery from minor spillages or accidental discharge is not
economically or technically feasible, and as such,
waste material should be disposed of by appropriate methods.
Industry - Possibility of neutralisation: Not applicable.
Industry - Possibility of destruction: controlled discharge: Contaminated containers, empty cartridges, spillage and
printed media may be disposed of by landfill at an
authorised tip in accordance with local regulations.
Industry - Possibility of destruction - incineration: Contaminated items containing the substance can be disposed
of by incineration by burning under controlled conditions at
a licenced waste treatment processor in accordance with
local regulations. Stack gasses should be scrubbed, as
noxious gasses could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged direct to
the sewage system or the aqueous environment.
Industry - Possibility of destruction - other: Plastic cartridges containing waste ink can be disposed of
by incineration, or may be recycled.
Public at large - Possibility of recovery/recycling: Recovery/recycling of the used substance is not technically
feasible.
Public at large - Possibility of neutralisation: Not applicable.
Public at large - Possibility of destruction: controlled discharge: Contaminated containers, empty cartridges, spillage and
printed media may be disposed of by landfill at an
authorised tip in accordance with local regulations.
Public at large - Possibility of destruction - incineration: Contaminated items containing the substance can be disposed
of by incineration by burning under controlled conditions at
a licenced waste treatment processor in accordance with
local regulations. Stack gasses should be scrubbed, as
noxious gasses could be formed.
Public at large - Possibility of destruction - water purification: Not applicable.
Public at large - Possibility of destruction - others: None
economically or technically feasible, and as such,
waste material should be disposed of by appropriate methods.
Industry - Possibility of neutralisation: Not applicable.
Industry - Possibility of destruction: controlled discharge: Contaminated containers, empty cartridges, spillage and
printed media may be disposed of by landfill at an
authorised tip in accordance with local regulations.
Industry - Possibility of destruction - incineration: Contaminated items containing the substance can be disposed
of by incineration by burning under controlled conditions at
a licenced waste treatment processor in accordance with
local regulations. Stack gasses should be scrubbed, as
noxious gasses could be formed.
Industry - Possibility of destruction - water purification: The substance should not normally be discharged direct to
the sewage system or the aqueous environment.
Industry - Possibility of destruction - other: Plastic cartridges containing waste ink can be disposed of
by incineration, or may be recycled.
Public at large - Possibility of recovery/recycling: Recovery/recycling of the used substance is not technically
feasible.
Public at large - Possibility of neutralisation: Not applicable.
Public at large - Possibility of destruction: controlled discharge: Contaminated containers, empty cartridges, spillage and
printed media may be disposed of by landfill at an
authorised tip in accordance with local regulations.
Public at large - Possibility of destruction - incineration: Contaminated items containing the substance can be disposed
of by incineration by burning under controlled conditions at
a licenced waste treatment processor in accordance with
local regulations. Stack gasses should be scrubbed, as
noxious gasses could be formed.
Public at large - Possibility of destruction - water purification: Not applicable.
Public at large - Possibility of destruction - others: None
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
