Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures  

 Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses.

 Continue to rinse for at least 10 minutes. Get medical attention.  

 Inhalation: Get medical attention immediately. Remove victim to fresh air and keep at rest in a

position comfortable for breathing. If it is suspected that fumes are still present, the

rescuer should wear an appropriate mask or self-contained breathing apparatus. If

not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial

respiration or oxygen by trained personnel. It may be dangerous to the person

providing aid to give mouth-to-mouth resuscitation. If unconscious, place in

recovery position and get medical attention immediately. Maintain an open airway.

Loosen tight clothing such as a collar, tie, belt or waistband. In the event of any

complaints or symptoms, avoid further exposure.

 Skin contact : Get medical attention immediately. Flush contaminated skin with plenty of water.

Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly

with water before removing it, or wear gloves. Continue to rinse for at least 10

minutes. In the event of any complaints or symptoms, avoid further exposure.

Wash clothing before reuse. Clean shoes thoroughly before reuse.

 Ingestion : Get medical attention immediately. Wash out mouth with water. Remove dentures

if any. Remove victim to fresh air and keep at rest in a position comfortable for

breathing. If material has been swallowed and the exposed person is conscious,

give small quantities of water to drink. Stop if the exposed person feels sick as

vomiting may be dangerous. Do not induce vomiting unless directed to do so by

medical personnel. If vomiting occurs, the head should be kept low so that vomit

does not enter the lungs. Never give anything by mouth to an unconscious person.

If unconscious, place in recovery position and get medical attention immediately.

Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

 Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is suspected that fumes are still

 present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. It may be dangerous to the person providing aid to

 give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water before removing it, or wear gloves.  

Most important symptoms and effects, both acute and delayed  

Potential acute health effects  

 Eye contact : Irritating to eyes.  

 Inhalation : May cause sensitization by inhalation.  

 Skin contact : May cause an allergic skin reaction.  

 Ingestion : No known significant effects or critical hazards.  

Over-exposure signs/symptoms  

 Eye contact : Adverse symptoms may include the following:

irritation

watering

redness  

 Inhalation : Adverse symptoms may include the following:

wheezing and breathing difficulties

asthma  

reduced fetal weight

increase in fetal deaths

skeletal malformations

 Skin contact : Adverse symptoms may include the following:

irritation

redness  

reduced fetal weight

increase in fetal deaths

skeletal malformations

 Ingestion : Adverse symptoms may include the following:

reduced fetal weight

increase in fetal deaths

skeletal malformations.  

Indication of any immediate medical attention and special treatment needed  

 Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.  

 Specific treatments : No specific treatment.

Fire-fighting measures

Extinguishing media  

 Suitable extinguishing media : Use an extinguishing agent suitable for the surrounding fire.  

 Unsuitable extinguishing media : None known.  

Special hazards arising from the substance or mixture  

 Hazards from the substance or mixture : No specific fire or explosion hazard.  

 Hazardous combustion products : Decomposition products may include the following materials:

metal oxide/oxides  

Advice for firefighters  

 Special precautions for fire-fighters : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action

 shall be taken involving any personal risk or without suitable training.  This material is very toxic to aquatic organisms. Fire water

contaminated with this material must be contained and prevented from being

discharged to any waterway, sewer or drain.

 Special protective equipment for fire-fighters : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus

 (SCBA) with a full face-piece operated in positive pressure mode. Clothing for fire-fighters (including helmets, protective boots and gloves)

 conforming to European standard EN 469 will provide a basic level of protection for chemical incidents.

Accidental release measures

Personal precautions, protective equipment and emergency procedures  

 For non-emergency personnel : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep

 unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Provide adequate ventilation. Wear

 appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment.  

 For emergency responders : If specialised clothing is required to deal with the spillage, take note of any information in Section 8 (MSDS) on suitable

 and unsuitable materials. See also the information in "For non-emergency personnel".  

 

 Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant

 authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to the

 environment if released in large quantities. Collect spillage.  

Methods and materials for containment and cleaning up  

 Small spill : Move containers from spill area. Avoid dust generation. Place spilled material in a

designated, labeled waste container. Do not dry sweep. Vacuum dust with

equipment fitted with a HEPA filter and place in a closed, labeled waste container.

Dispose of via a licensed waste disposal contractor.

 Large spill : Move containers from spill area. Approach release from upwind. Prevent entry into

sewers, water courses, basements or confined areas. Avoid dust generation. Do

not dry sweep. Vacuum dust with equipment fitted with a HEPA filter and place in a

closed, labeled waste container. Dispose of via a licensed waste disposal contractor.

 

 Reference to other sections : See Section 1 (MSDS) for emergency contact information.

See Section 8 (MSDS) for information on appropriate personal protective equipment.

See Section 13 (MSDS) for additional waste treatment information.

Handling and storage

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 (MSDS) should be consulted for any

available use-specific information provided in the Exposure Scenario(s).  

Precautions for safe handling  

 Protective measures :  

Put on appropriate personal protective equipment (see Section 8). Persons with a history of skin sensitization problems or asthma, allergies or

chronic or recurrent respiratory disease should not be employed in any process in which this product is used. Avoid exposure - obtain special

instructions before use. Do not handle until all safety precautions have been read and understood. Do not get in eyes or on skin or clothing. Do not

ingest. Avoid release to the environment. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product

residue and can be hazardous. Do not reuse container.  

 Advice on general occupational hygiene : Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and

 processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment

 before entering eating areas. See also Section 8 for additional information on hygiene measures.  

 

 Conditions for safe storage, including any incompatibilities : Store in accordance with local regulations. Store in original container protected from

 direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10) and food and drink. Store locked up. Keep

 container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent

 leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.  

Seveso II Directive - Reporting thresholds (in tonnes)

Danger criteria

Category / Notification and MAPP threshold / Safety report threshold

E1: Hazardous to the aquatic environment - Acute 1 or Chronic 1 / 100 / 200

C2: Toxic / 50 / 200

C9i: Very toxic for the environment / 100 / 200

Specific end use(s)  

 Recommendations : Not available.  

 Industrial sector specific solutions : Not available.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 (MSDS) should be consulted for any

available use-specific information provided in the Exposure Scenario(s).  

Control parameters  

Occupational exposure limits  

Product/ingredient name:  cobalt  

Exposure limit values  

  Lijst Grenswaarden / Valeurs Limites (Belgium, 11/2011).

Notes: As Co TWA: 0.02 mg/m³, (as Co) 8 hours. Form: dust and fume

Product/ingredient name:  nickel

 Exposure limit values:

Lijst Grenswaarden / Valeurs Limites (Belgium, 11/2011).

TWA: 1 mg/m³,  8 hours.

Product/ingredient name:  Iron

 Exposure limit values: Lijst Grenswaarden (Belgium, 2002). Notes: Dust

TWA: 10 mg/m³ 8 hours.

 Product/ingredient name: Copper.  

  Exposure limit values: Lijst Grenswaarden / Valeurs Limites (Belgium, 11/2011).

TWA: 1 mg/m³, (as Cu) 8 hours. Form: dust and mist

Lijst Grenswaarden / Valeurs Limites (Belgium, 11/2011).

Notes: As Cu  TWA: 0.2 mg/m³, (as Cu) 8 hours. Form: fume

  Product/ingredient name:  Manganese

 Exposure limit values: Lijst Grenswaarden / Valeurs Limites (Belgium, 11/2011).

TWA: 0.2 mg/m³, (as Mn) 8 hours.

 

  Product/ingredient name:  Silicon

 Exposure limit values: Lijst Grenswaarden / Valeurs Limites (Belgium, 11/2011).

TWA: 10 mg/m³ 8 hours.

Product/ingredient name:  Chromium

 Exposure limit values: Lijst Grenswaarden / Valeurs Limites (Belgium, 11/2011).

TWA: 0.5 mg/m³ 8 hours.

 

 Recommended monitoring procedures : If this product contains ingredients with exposure limits, personal, workplace

atmosphere or biological monitoring may be required to determine the effectiveness

of the ventilation or other control measures and/or the necessity to use respiratory

protective equipment. Reference should be made to monitoring standards, such as

the following: European Standard EN 689 (Workplace atmospheres - Guidance for

the assessment of exposure by inhalation to chemical agents for comparison with

limit values and measurement strategy) European Standard EN 14042 (Workplace

atmospheres - Guide for the application and use of procedures for the assessment

of exposure to chemical and biological agents) European Standard EN 482

(Workplace atmospheres - General requirements for the performance of procedures

for the measurement of chemical agents) Reference to national guidance

documents for methods for the determination of hazardous substances will also be required.

 Derived effect levels  

Product/ingredient name:  cobalt

Type  Exposure  Value  Population  Effects  

 DNEL  Inhalation  0,04 mg/m³  Workers  -  

 DNEL  Long term Inhalation  0,0063 mg/m³  Man via the environment  Local  

 DNEL  Long term Oral  0,0095 mg/kg bw/day  Man via the environment  Local  

 Product/ingredient name: nickel  

 Type  Exposure  Value  Population  Effects

DNEL Short term Inhalation 680 mg/m³ Workers Systemic

DNEL Short term Inhalation 4 mg/m³ Workers Local

DNEL Long term Inhalation 0.05 mg/m³ Workers Systemic

DNEL Long term Inhalation 0.05 mg/m³ Workers Local

DNEL Long term Dermal 0.07 mg/cm² Workers Local

DNEL Short term Inhalation 408 mg/m³ Consumers Systemic

DNEL Short term Oral 0.012 mg/ kg bw/day Consumers Systemic

DNEL Short term Inhalation 2.4 mg/m³ Consumers Local

DNEL Long term Inhalation 0.00002 mg/m³ Consumers Systemic

DNEL Long term Oral 0.02 mg/ kg bw/day Consumers Systemic

DNEL Long term Inhalation 0.00002 mg/m³ Consumers Local

DNEL Long term Dermal 0.07 mg/ cm² Consumers Local  

Predicted effect concentrations  

Product/ingredient name :  cobalt

Type  Compartment Detail  Value  Method Detail  

 PNEC  Sewage Treatment Plant  0,37 mg/l  -  

  PNEC  Fresh water  0,51 μg/l  -  

  PNEC  Marine  2,36 μg/l  -  

  PNEC  Fresh water sediment  9,5 mg/kg dwt  -  

  PNEC  Marine water sediment  9,5 mg/kg dwt  -  

  PNEC  Soil  7,9 mg/kg dwt  -  

Product/ingredient name :   nickel

Type  Compartment Detail  Value  Method Detail

  PNEC  Fresh water  33.6 μg/l Sensitivity Distribution

PNEC Marine 8.6 μg/l Sensitivity Distribution

PNEC Soil 29.9 mg/kg Sensitivity Distribution

- Sewage Treatment Plant 0.33 mg/l Assessment Factors

Exposure controls  

 Appropriate engineering controls : Use only with adequate ventilation. If user operations generate dust, fumes, gas, vapor or mist, use process

 enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.  

 Individual protection measures  

 Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Contaminated work

 clothing should not be allowed out of the workplace. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety

 showers are close to the workstation location.  

 Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk

assessment indicates this is necessary to avoid exposure to liquid splashes, mists

or dusts. If contact is possible, the following protection should be worn, unless the

assessment indicates a higher degree of protection: chemical splash goggles.

 Skin protection  

 Hand protection :Chemical-resistant, impervious gloves complying with an approved standard should

be worn at all times when handling chemical products if a risk assessment indicates

this is necessary. Considering the parameters specified by the glove manufacturer,

check during use that the gloves are still retaining their protective properties. It

should be noted that the time to breakthrough for any glove material may be

different for different glove manufacturers. In the case of mixtures, consisting of

several substances, the protection time of the gloves cannot be accurately estimated.

 Body protection : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.  

 Other skin protection : Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.  

 Respiratory protection : Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment

 indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.  

 Environmental exposure controls : Emissions from ventilation or work process equipment should be checked to ensure they comply with the

 requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process

 equipment will be necessary to reduce emissions to acceptable levels.

Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or its ingredients.  

 Chemical stability : The product is stable.  

 Possibility of hazardous reactions : Under normal conditions of storage and use, hazardous reactions will not occur.  

 Conditions to avoid : No specific data.  

 Incompatible materials : No specific data.  

 Hazardous decomposition products : Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Disposal considerations

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 (MSDS) should be consulted for any

available use-specific information provided in the Exposure Scenario(s).  

Waste treatment methods  

Product  

 Methods of disposal : The generation of waste should be avoided or minimized wherever possible. Waste

product residues should not be disposed of via the sewer but processed in a

suitable effluent treatment plant. Dispose of surplus and non-recyclable products

via a licensed waste disposal contractor. Disposal of this product, solutions and any

by-products should at all times comply with the requirements of environmental

protection and waste disposal legislation and any regional local authority

requirements. Waste packaging should be recycled. Incineration or landfill should

only be considered when recycling is not feasible. This material and its container

must be disposed of in a safe way. Care should be taken when handling emptied

containers that have not been cleaned or rinsed out. Empty containers or liners

may retain some product residues. Avoid dispersal of spilled material and runoff

and contact with soil, waterways, drains and sewers.

 

 Hazardous waste : The classification of the product may meet the criteria for a hazardous waste.  

 Packaging  

 Methods of disposal : The generation of waste should be avoided or minimized wherever possible. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible.  

 Special precautions : This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.