Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General advice:

Remove contaminated clothing.

If inhaled:

Immediately inhale corticosteroid dose aerosol. Keep patient calm, remove to fresh air, seek medical

attention.

On skin contact:

Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.

On contact with eyes:

Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open,

consult an eye specialist.

On ingestion:

Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.

Note to physician:

Treatment: Treat according to symptoms (decontamination, vital functions), no known specific

antidote.

Fire-fighting measures

Suitable extinguishing media:

water spray, dry powder, carbon dioxide, foam

Special protective equipment:

Wear self-contained breathing apparatus and chemical-protective clothing.

Further information:

Dispose of fire debris and contaminated extinguishing water in accordance with official regulations

Accidental release measures

Personal precautions:

Avoid contact with the skin, eyes and clothing. Take off immediately all contaminated clothing. Ensure

adequate ventilation.

Environmental precautions:

Do not discharge into drains/surface waters/groundwater.

Methods for cleaning up or taking up:

For large amounts: Dike spillage. Pump off product.

For residues: Contain with absorbent material (e.g. sand, silica gel, acid binder, general purpose

binder, sawdust).

Dispose of absorbed material in accordance with regulations.

Handling and storage

Handling

Ensure thorough ventilation of stores and work areas.

Protection against fire and explosion:

Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should

be kept handy.

Storage

Suitable materials for containers: Stainless steel 1.4301 (V2), Stainless steel 1.4401, Stove-lacquer

RDL 50, glass, High density polyethylene (HDPE), Low density polyethylene (LDPE), tin (tinplate),

aluminum

Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.

Protect from the effects of light.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Components with workplace control parameters

none

Personal protective equipment

Respiratory protection:

Respiratory protection in case of vapour/aerosol release. Particle filter with medium efficiency for solid

and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)Components with workplace control parameters

none

Personal protective equipment

Respiratory protection:

Respiratory protection in case of vapour/aerosol release. Particle filter with medium efficiency for solid

and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)Hand protection:

Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact

(Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN

374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) and other

Supplementary note: The specifications are based on tests, literature data and information of glove

manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g.

temperature) it must be considered, that the practical usage of a chemical-protective glove in practice

may be much shorter than the permeation time determined through testing.

Eye protection:

Tightly fitting safety goggles (cage goggles) (e.g. EN 166) and face shield.

Body protection:

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting

boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of

dust).

General safety and hygiene measures:

Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work

clothing is required additionally to the stated personal protection equipment.

Stability and reactivity

Thermal decomposition: No decomposition if stored and handled as

prescribed/indicated.

Substances to avoid:

strong oxidizing agents, acids, bases

Hazardous reactions:

No hazardous reactions if stored and handled as prescribed/indicated.

Disposal considerations

Observe national and local legal requirements.

Contaminated packaging:

Uncontaminated packaging can be re-used.

Packs that cannot be cleaned should be disposed of in the same manner as the contents.