Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 700-570-7 | CAS number: 1217271-49-2
Flash point
Administrative data
Link to relevant study record(s)
- Endpoint:
- flash point of flammable liquids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- from 2011-04-04 to 2011-06-10
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.9 (Flash-Point)
- Version / remarks:
- 31 May 2008
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 830.6315 (Flammability)
- Version / remarks:
- August 1996
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- ISO No., other: UN Manual Test Methods 32.4; Rev. 5, 2009
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- equilibrium method closed cup
- Flash point apparatus:
- Pensky-Martens apparatus
- Specific details on test material used for the study:
- - Batch no.: 10191-AKm
- Purity. 100.5 % (aldimine titration)
- Expiry date: 2013-06-16 - Key result
- Flash point:
- 148.5 °C
- Atm. press.:
- 1 013 hPa
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- The flash point of Sika Hardener MH was determined to be 148.5 °C.
- Executive summary:
The determination of the flash point of Sika Hardener MH was performed according to EU Method A.9, OPPTS 830.6315 and UN Manual Test Methods 32.4. Three independent determinations were performed. The maximum variation was 3 K. Therefore, the lowest two values (which showed a variation of 2 K) were used for calculation of the mean. The flash point of Sika Hardener MH was determined to be148.5 °C.
Reference
The results of the determinations are presented in the following table:
|
Program |
Flash point |
Notes |
Pre Test |
SEl |
150.5 |
not used for calculation |
Measurement 1 |
ENI |
147.5 |
used for calculation |
Measurement 2 |
ENl |
150.5 |
not used for calculation |
Measurement 3 |
ENl |
149.5 |
used for calculation |
Description of key information
The flash point of Sika Hardener MH was determined to be 148.5 °C.
Key value for chemical safety assessment
- Flash point at 101 325 Pa:
- 148.5 °C
Additional information
The determination of the flash point of Sika Hardener MH was performed according to EU Method A.9, OPPTS 830.6315 and UN Manual Test Methods 32.4. Three independent determinations were performed. The maximum variation was 3 K. Therefore, the lowest two values (which showed a variation of 2 K) were used for calculation of the mean. The flash point of Sika Hardener MH was determined to be 148.5 °C.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
