Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

- Following inhalation:

fresh air.

- Following skin contact:

Take off immediately all contaminated clothing. Rinse skin with water/ shower.

- Following eye contact:

rinse out with plenty of water. Remove contact lenses.

- Following ingestion:

make victim drink water (two glasses at most). Consult doctor if feeling unwell.

- Most important symptoms and effects: We have no description of any toxic symptoms.

Fire-fighting measures

- Suitable extinguishing media:

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

- Unsuitable extinguishing media:

For this substance/mixture no limitations of extinguishing agents are given.

- Special hazards arising from the substance or mixture:

Not combustible.

Ambient fire may liberate hazardous vapours.

- Advice for fire fighter: In the event of fire, wear self-contained breathing apparatus. Prevent fire extinguishing water from contaminating surface water or the ground water system.

Accidental release measures

- Personal precautions, protective equipment and emergency procedures:

Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert.

Advice for emergency responders: Protective equipment see section 8.

- Environmental precautions:

Do not flush into surface water or sanitary sewer system.

- Methods and material for containment and cleaning up: Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.

Handling and storage

- Precautions for safe handling:

Advice on safe handling: Observe label precautions.

Hygiene measures: Change contaminated clothing. Wash hands after working with substance.

- Conditions for safe storage, including any incompatibilities:

Requirements for storage areas and containers: Store in original container. Further information on storage conditions: Tightly closed. Dry.

Risks from decomposition products: see section 10.3

Recommended storage temperature: Recommended storage temperature see product label.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls

- Engineering measures: Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section "Handling and storage - Precautins for safe handling".

Personal protective equipment

- Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.

- Eye protection: Safety glasses

- Hand protection: full contact

        Glove material: Nitrile rubber

        Glove thickness: 0.11 mm

        Break through time:  480 min

        splash contact

        Glove material: Nitrile rubber

        Glove thickness: 0.11 mm

        Break through time:  480 min

The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example:KCL 741 Dermatril® L(full contact);KCL 741 Dermatril® L(splash contact).

The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types.

This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

- Respiratory protection: required when dusts are generated.

- Recommended Filter type: Filter P 1 (acc. to DIN 3181) for solid particles of inert substances

The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Environmental exposure controls

- General advice: Do not flush into surface water or sanitary sewer system.

Stability and reactivity

Reactivity

- See "Possibility of hazardous reactions"

Chemical stability

- The product is chemically stable under standard ambient conditions (room temperature) .

Possibility of hazardous reactions

- no information available

Conditions to avoid

- no information available

Incompatible materials

- no information available

Hazardous decomposition products

- no information available

Disposal considerations

In accordance with the Directive on waste 2008/98/EC as well as other national and local regulations.