ippc-ann-5-6-8-dir-2010-75

IPPC, Annexes V, VI, VIII - Provisions relating to industrial plants

This list contains emission limit values for polluting substances in waste gases and waste water, assigned according to facility type (i.e., combustion plants (Annex V), waste incineration/co-incineration plants (Annex VI), and installations producing titanium dioxide (Annex VIII)), under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). For this list, if a substance presents 2 values in the ''Average sampling duration'' field, these indicate minimum and maximum average sampling period.

Thallium and its compounds

EC / List no: - CAS no: -
Expressed As
As thallium
Annex
VI Annex VI (Directive 2010/75/EU) Technical provisions relating to waste incineration plants and waste co-incineration plants
Group
Cadmium and thallium and their compounds
Process/equipment
Combustion plants co-incinerating waste
Part
Part 4 (VI) Determination of air emission limit values for the co-incineration of waste
Point
4.2
Qualifier
For waste co-incineration plants in industrial sectors not covered under Points 2 and 3 of this Part (Annex VI, Part 4)
Notes
22 These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds

23 Emission limit value defined as total emission limit for the total sum of cadmium and thallium, expressed as average value over the sampling period

30 All emission limit values shall be calculated at a temperature of 273,15 K, a pressure of 101,3 kPa and after correcting for the water vapour content of the waste gases

39 For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU


Categories Display