This Directive shall apply to electrical and electronic equipment (EEE) as follows: (a) from 13 August 2012 to 14 August 2018 (transitional period), subject to paragraph 3, to EEE falling within the categories set out in Annex I. Annex II contains an indicative list of EEE which falls within the categories set out in Annex I; (b) from 15 August 2018, subject to paragraphs 3 and 4, to all EEE. All EEE shall be classified within the categories set out in Annex III. Annex IV contains a non-exhaustive list of EEE which falls within the categories set out in Annex III (open scope).
This Directive shall not apply to any of the following EEE (Article 2, point 3): (a) equipment which is necessary for the protection of the essential interests of the security of Member States, including arms, munitions and war material intended for specifically military purposes; (b) equipment which is specifically designed and installed as part of another type of equipment that is excluded from or does not fall within the scope of this Directive, which can fulfil its function only if it is part of that equipment; (c) filament bulbs In addition to the equipment specified in paragraph 3, from 15 August 2018, this Directive shall not apply to the following EEE (Article 3, point 4): (a) equipment designed to be sent into space; (b) large-scale stationary industrial tools; (c) large-scale fixed installations, except any equipment which is not specifically designed and installed as part of those installations; (d) means of transport for persons or goods, excluding electric two-wheel vehicles which are not type-approved; (e) non-road mobile machinery made available exclusively for professional use; (f) equipment specifically designed solely for the purposes of research and development that is only made available on a business-to-business basis; (g) medical devices and in vitro diagnostic medical devices, where such devices are expected to be infective prior to end of life, and active implantable medical devices.
Article 9 - Permits (1) Member States shall ensure that any establishment or undertaking carrying out treatment operations obtains a permit from the competent authorities in compliance with Article 23 of Directive 2008/98/EC. (2) Exemptions from permit requirements, conditions for exemptions and registration shall be in compliance, respectively, with Articles 24, 25 and 26 of Directive 2008/98/EC. (3) Member States shall ensure that the permit or the registration referred to in paragraphs 1 and 2 includes all the conditions that are necessary for compliance with the requirements of Article 8(2), (3) and (5) and for the achievement of the recovery targets set out in Article 11. Article 11 - Recovery targets Regarding all WEEE separately collected in accordance with Article 5 and sent for treatment in accordance with Articles 8, 9 and 10, Member States shall ensure that producers meet the minimum targets set out in Annex V. Article 14 - Information for users Member States may require producers to show purchasers, at the time of sale of new products, the costs of collection, treatment and disposal in an environmentally sound way. The costs mentioned shall not exceed the best estimate of the actual costs incurred. Article 15 - Information for treatment facilities In order to facilitate the preparation for re-use and the correct and environmentally sound treatment of WEEE, including maintenance, upgrade, refurbishment and recycling, Member States shall take the necessary measures to ensure that producers provide information free of charge about preparation for re-use and treatment in respect of each type of new EEE placed for the first time on the Union market within one year after the equipment is placed on the market.
Relevant product types
Yes - Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) - Directive 2008/98/EC
Obligations based on CLP hazard class
Yes Annex VII, point 1, paragraph
Obligations based on properties of concerns
Yes Annex VII, point 1, paragraph 15 states - electrolyte capacitors containing substances of concern (height > 25 mm, diameter > 25 mm or proportionately similar volume)
EU-level occupational exposure limits
EU-level emission limit values
Substance-centric data source(s) at the EU level
Industry submission system in place
Yes, but at MS national levels. Each country defines the format and the way information is submitted to responsible authorities.
Format for industry submission
DG ENV as legislation owner
Directive (EU) 2018/849 of the European Parliament and of the Council of 30 May 2018 amending Directives 2000/53/EC on end-of-life vehicles, 2006/66/EC on batteries and accumulators and waste batteries and accumulators, and 2012/19/EU on waste electrical and electronic equipment
- Batteries Directive
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators and waste batteries and accumulators and repealing Directive 91/157/EEC
- Packaging and Packaging Waste Directive
European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging waste
- RoHS - Restriction of Hazardous Substances in Electrical & Electronic Equipment Directive
Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (recast)
- WFD - Waste Framework Directive
Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives