plastic-material-food-contact

plastic-material-food-contact

FCM and Articles Regulation, Annex I - Authorised Substances

EU. Union List of Authorized Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation (EU) 2023/1627, OJ L 201, 11 August 2023

This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.

Last updated 26 April 2024. Database contains 1080 unique substances/entries.

Filter the list

Showing 1 - 200 of 1,080 results.

Substance Name	EC No.	CAS No.	FCM No	Ref No.	Additive or PPA	FRF applicable	SML (mg/kg)	Restriction(s)
(butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer not cross-linked	-	-	998		yes	no		Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage. When used together with the substance with FCM No 859 and/or the substance with FCM No 1043, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.	Details
lactic acid	200-018-0	50-21-5	99	19460 62960	yes	no			Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of Lactic acid	-	-	99	19460 62960	yes	no			Details
1,3-bis(isocyanatomethyl)benzene	222-852-4	3634-83-1	988		no	no		SML(T) applies to the migration of its hydrolysis product, 1,3- benzenedimethanamine. To be used only as co-monomer in the manufacture of a middle layer coating on a poly(ethylene terephthalate) polymer film in a multilayer film.	Details
formaldehyde	200-001-8	50-00-0	98	17260 54880	yes	no			Details
(polyethylene terephthalate, hydroxylated polybutadiene, pyromellitic anhydride) copolymer	-	-	979	79987	yes	no		Only to be used in polyethylene terephthalate (PET) at a maximum level of 5 % w/w.	Details
phosphorous acid, mixed 2,4-bis(1,1-dimethylpropyl)phenyl and 4-(1,1-dimethylpropyl)phenyl triesters	700-485-5	939402-02-5	974	74050	yes	yes	10 mg/kg	SML expressed as the sum of the phosphite and phosphate forms of the substance, 4-tert-amylphenol and 2,4-di-tert-amylphenol.	Details
phosphorous acid, mixed 2,4-bis(1,1-dimethylpropyl)phenyl and 4-(1,1-dimethylpropyl)phenyl triesters	700-485-5	939402-02-5	974	74050	yes	yes	1 mg/kg	The migration of 2,4-di-tert-amylphenol shall not exceed 1 mg/kg food.	Details
(perfluorobutyl)ethylene	243-053-7	19430-93-4	973	22931	no	no		Only to be used as a co-monomer up to 0,1 % w/w in the polymerisation of fluoropolymers, sintered at high temperatures.	Details
copper hydroxide phosphate	235-285-2	12158-74-6	972	45197	yes	no			Details
trimethyl trimellitate	219-547-3	2459-10-1	971	25885	no	no		Only to be used as a co-monomer up to 0,35 % w/w to produce modified polyesters intended to be used in contact with aqueous and dry foodstuffs containing no free fat at the surface.	Details
petroleum hydrocarbon resins (hydrogenated)	-	-	97	72081/10	yes	no		Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermalpolymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing. Properties: Viscosity at 120 °C: > 3 Pa.s,Softening point: > 95 °C as determined by ASTM Method E 28-67,Bromine number: < 40 (ASTM D1159),The colour of a 50 % solution in toluene < 11 on the Gardner scale,Residual aromatic monomer ≤ 50 ppm.	Details
ethylene-vinyl acetate copolymer wax	429-840-1	24937-78-8	969		yes	no		Only to be used as a polymeric additive up to 2 % w/w in polyolefins. The migration of low molecular weight oligomeric fraction below 1 000 Da shall not exceed 5 mg/kg food.	Details
white mineral oils, paraffinic, derived from petroleum based hydrocarbon feedstocks	-	-	95	95883	yes	no		Average molecular weight not less than 480 Da. Viscosity at 100 °C not less than 8,5 cSt (8,5 × 10-6 m2/s). Content of mineral hydrocarbons with Carbon number less than 25, not more than 5 % (w/w)	Details
waxes, refined, derived from petroleum based or synthetic hydrocarbon feedstocks, high viscosity	-	-	94	95859	yes	no		Average molecular weight not less than 500 Da. Viscosity at 100 °C not less than 11 cSt (11 × 10-6 m2/s). Content of mineral hydrocarbons with Carbon number less than 25, not more than 5 % (w/w)	Details
waxes, paraffinic, refined, derived from petroleum based or synthetic hydrocarbon feedstocks, low viscosity	-	-	93	95858	yes	no	0.05 mg/kg	Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down. Average molecular weight not less than 350 Da. Viscosity at 100 °C not less than 2,5 cSt (2,5 × 10-6 m2/s). Content of hydrocarbons with Carbon number less than 25, not more than 40 % (w/w).	Details
perfluoro[(2-ethyloxy-ethoxy)acetic acid], ammonium salt	700-323-3	908020-52-0	926	71955	yes	no		Only to be used in the polymerisation of fluoropolymers that are processed at temperatures higher than 300 °C for at least 10 minutes.	Details
trimethylolpropane, mixed triesters and diesters with n-octanoic and n-decanoic acids	-	-	924	94987	yes	no	0.05 mg/kg	Only for use in PET in contact with all types of foods other than fatty, high- alcoholic and dairy products.	Details
N,N-bis(2-hydroxyethyl)dodecanamide	204-393-1	120-40-1	923	39150	yes	no	5 mg/kg	The residual amount of diethanolamine in plastics, as an impurity and decomposition product of the substance, shall not result in a migration of diethanolamine higher than 0,3 mg/kg food.	Details
tricyclodecanedimethanol bis(hexahydrophthalate)	-	-	92	93970	yes	no	0.05 mg/kg		Details
tetradecyl-polyethyleneglycol(EO = 3-8) ether of glycolic acid	-	-	91	92320	yes	yes	15 mg/kg		Details
2H-perfluoro-[(5,8,11,14-tetramethyl)-tetraethyleneglycol ethyl propyl ether]	-	37486-69-4	903		yes	no		Only to be used as a polymer production aid in the polymerisation of fluoropolymers intended for: (a) repeated and single use materials and articles when sintered or processed (non-sintered) at temperatures at or above 360 °C for at least 10 minutes or at higher temperatures for equivalent shorter times; (b) repeated use materials and articles when processed (non-sintered) at temperatures from 300 °C and up to 360 °C for at least 10 minutes.	Details
1,2-benziso-thiazol-3(2H)-one 1,1-dioxide, sodium salt	204-886-1	128-44-9	902		yes	no		The substance shall comply with the specific purity criteria as set out in Commission Regulation (EU) No 231/2012 (OJ L 83, 22.3.2012, p. 1).	Details
taurine, salts	-	-	90	92195	yes	no			Details
acids, C2-C24, aliphatic, linear, monocarboxylic from natural oils and fats, and their mono-, di- and triglycerol esters (branched fatty acids at naturally occuring levels are included)	-	-	9	30610	yes	no			Details
3H-perfluoro-3-[(3-methoxy-propoxy) propanoic acid], ammonium salt	-	958445-44-8	896	71958	yes	no		Only to be used in the polymerisation of fluoropolymers when: (1.) processed at temperatures higher than 280 °C for at least 10 minutes, (2.) processed at temperatures higher than 190 °C up to 30 % w/w for use in blends with polyoxymethylene polymers and intended for repeated use articles.	Details
3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoic acid, esters with C13-C15 branched and linear alcohols ANOX 1315; ANOX BF; DURAD AX 38	413-750-2	171090-93-0	895	47060	yes	no	0.05 mg/kg	Only to be used in polyolefins in contact with foods other than fatty/ high-alcoholic and dairy products.	Details
thiodipropionic acid, ditetradecyl ester	240-613-2	16545-54-3	894	93360	yes	no			Details
stearic acid, esters with ethyleneglycol	-	-	89	89440	yes	no			Details
cyclic oligomers of (butylene terephthalate)	-	263244-54-8	885	45676	yes	no		Only to be used in poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), polycarbonate (PC), polystyrene (PS) and rigid poly(vinyl chloride) (PVC) plastics in concentrations up to 1 % w/w, in contact with aqueous, acidic and alcoholic foods, for long term storage at room temperature.	Details
alkyl(C10-C21)sulphonic acid, esters with phenol	293-728-5	91082-17-6	884	34240	yes	no	0.05 mg/kg	Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.	Details
3-methyl-1,5-pentanediol	224-709-1	4457-71-0	883	22074	no	no	0.05 mg/kg	Only to be used in materials in contact with food at a surface to mass ratio up to 0,5 dm2/kg.	Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of 2,3,6-Trimethylphenol	-	-	882	25872	no	no	0.05 mg/kg		Details
2,3,6-trimethylphenol	219-330-3	2416-94-6	882	25872	no	no	0.05 mg/kg		Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of 2,2,4,4-Tetramethylcyclobutane-1,3-diol	-	-	881	25187	no	no	5 mg/kg	Only for: (a) repeated use articles for long term storage at room temperature or below and hotfill; (b) single use materials and articles as a co-monomer at a maximum use level of 35 mole % of the diol component of polyesters, and if such materials and articles are for long term storage at room temperature or below of food types which have an alcohol content of up to 10 % and for which Table 2 of Annex III does not assign simulant D2. Hot fill conditions are allowed for such single use materials and articles.	Details
2,2,4,4-tetramethylcyclobutane-1,3-diol	221-140-0	3010-96-6	881	25187	no	no	5 mg/kg	Only for: (a) repeated use articles for long term storage at room temperature or below and hotfill; (b) single use materials and articles as a co-monomer at a maximum use level of 35 mole % of the diol component of polyesters, and if such materials and articles are for long term storage at room temperature or below of food types which have an alcohol content of up to 10 % and for which Table 2 of Annex III does not assign simulant D2. Hot fill conditions are allowed for such single use materials and articles.	Details
acids, fatty (C8-C22), esters with pentaerythritol	-	-	880	31348	yes	no			Details
sodium monoalkyl dialkylphenoxybenzenedisulphonate	-	-	88	86880	yes	no	9 mg/kg		Details
acids, fatty (C8-C22) from animal or vegetable fats and oils, esters with alcohols, linear, aliphatic, monohydric, saturated, primary (C1-C22)	-	-	879	31336	yes	no			Details
acids, fatty (C8-C22) from animal or vegetable fats and oils, esters with branched alcohols, aliphatic, monohydric, saturated, primary (C3-C22)	-	-	878	31335	yes	no			Details
poly(12-hydroxystearic acid) stearate	500-140-7	58128-22-6	875	80345	yes	yes	5 mg/kg		Details
α-dimethyl-3-(4'-hydroxy-3'-methoxyphenyl)propylsilyloxy, ω-3-dimethyl-3-(4'-hydroxy-3'-methoxyphenyl) propylsilyl polydimethylsiloxane	641-029-4	156065-00-8	874	16265	no	no	0.05 mg/kg	Only to be used as comonomer in siloxane modified polycarbonate. The oligomeric mixture shall be characterised by the formula C24H38Si2O5(SiOC2H6)n (50 > n ≥ 26).	Details
α-dimethyl-3-(4'-hydroxy-3'-methoxyphenyl)propylsilyloxy, ω-3-dimethyl-3-(4'-hydroxy-3'-methoxyphenyl) propylsilyl polydimethylsiloxane	641-029-4	156065-00-8	874	16265	no	no		Only to be used as comonomer in siloxane modified polycarbonate. The oligomeric mixture shall be characterised by the formula C24H38Si2O5(SiOC2H6)n (50 > n ≥ 26).	Details
titanium dioxide reacted with octyltriethoxysilane	-	-	873	93460	yes	no		Reaction product of titanium dioxide with up to 2 % w/w surface treatment substance octyltriethoxysilane, processed at high temperatures.	Details
2-phenyl-3,3-bis(4-hydroxyphenyl)phthalimidine	455-890-7	6607-41-6	872		no	no	0.05 mg/kg	To be used only as a co-monomer in polycarbonate copolymers.	Details
dodecanoic acid, 12-amino-, polymer with ethene, 2,5-furandione, α-hydro-ω-hydroxypoly (oxy-1,2-ethanediyl) and 1-propene	-	287916-86-3	871		yes	no		Only to be used in polyolefins at levels of up to 20 weight %. These polyolefins shall only be used in contact with foods for which Table 2 of Annex III assigns food simulant E, at ambient temperature or below, and when migration of the total oligomeric fraction of less than 1 000 Da does not exceed 50 µg/kg food.	Details
N,N',N''-tris(2-methylcyclohexyl)-1,2,3-propane-tricarboxamide	481-840-9	160535-46-6	870	95500	yes	no	5 mg/kg		Details
silicon dioxide, silanated	-	-	87	86285	yes	no		For synthetic amorphous silicon dioxide, silanated: primary particles of 1-100 nm which are aggregated to a size of 0,1-1 µm and may form agglomerates within the size distribution of 0,3 µm to the mm size.	Details
(butyl acrylate, methyl methacrylate, styrene) copolymer	608-050-0	27136-15-8	869	66763	yes	no		Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 3 %.	Details
(ethyl acrylate, methyl methacrylate) copolymer	618-459-6	9010-88-2	868	53245	yes	no		Only to be used in: (a) rigid poly(vinyl chloride) (PVC) at a maximum level of 2 % w/w. (b) polylactic acid (PLA) at a maximum level of 5 % w/w. (c) polyethylene terephthalate (PET) at a maximum level of 5 % w/w.	Details
(butyl methacrylate, ethyl acrylate, methyl methacrylate) copolymer	-	40471-03-2	867	40815	yes	no		Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 2 %.	Details
(butyl acrylate, methyl methacrylate) copolymer, cross-linked with allyl methacrylate	-	-	866	40620	yes	no		Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 7 %.	Details
(butyl acrylate, methyl methacrylate, butyl methacrylate) copolymer	607-698-1	25322-99-0	865	40619	yes	no		Only to be used in: (a) rigid poly(vinyl chloride) (PVC) at a maximum level of 1 % w/w. (b) polylactic acid (PLA) at a maximum level of 5 % w/w.	Details
2,4-diamino-6-hydroxypyrimidine	200-254-4	56-06-4	864	46330	yes	no	5 mg/kg	Only to be used in rigid poly(vinyl chloride) (PVC) in contact with non-acidic and non-alcoholic aqueous food.	Details
1,10-decanediamine	211-471-9	646-25-3	863	15260	no	no	0.05 mg/kg	Only to be used as a co-monomer for manufacturing polyamide articles for repeated use in contact with aqueous, acidic and dairy foodstuffs at room temperature or for short term contact up to 150 °C.	Details
3,4-diacetoxy-1-butene 3,4-DIACETOXY-1-BUTENE	421-720-5	18085-02-4	862	15180	no	no	0.05 mg/kg	SML including the hydrolysis product 3,4- dihydroxy-1-butene. Only to be used as a co-monomer for ethylvinylalcohol (EVOH) and polyvinylalcohol (PVOH) copolymers.	Details
perfluoro[2-(n-propoxy)propanoic acid]	236-236-8	13252-13-6	861	71990	yes	no		Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C and are intended for use in repeated use articles.	Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of Perfluoro[2-(n-propoxy)propanoic acid]	-	-	861	71990	yes	no		Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C and are intended for use in repeated use articles.	Details
perfluoro[2-(poly(n-propoxy))propanoic acid]	680-272-0	51798-33-5	860	71980	yes	no		Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C and are intended for use in repeated use articles.	Details
silicic acid, silylated	-	-	86	86000	yes	no			Details
(butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer crosslinked with divinylbenzene	-	-	859		yes	no		Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage. When used together with the substance with FCM No 998 and/or the substance with FCM No 1043, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.	Details
3,9-bis[2-(3-(3-tert-butyl-4-hydroxy-5-methylphenyl) propionyloxy)-1,1-dimethylethyl]-2,4,8,10-tetraoxaspiro[5,5] undecane ADK STAB AO 80; SUMILIZER GA-80	410-730-5	90498-90-1	858	38565	yes	yes	0.05 mg/kg	SML expressed as the sum of the substance and its oxidation product 3-[(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)prop-2-enoyloxy)-1,1-dimethylethyl]-9-[(3-(3-tert-butyl-4-hydroxy-5-methylphenyl) propionyloxy)-1,1-dimethylethyl]-2,4,8,10-tetraoxaspiro [5,5]-undecane in equilibrium with its para quinone methid tautomer.	Details
(methyl methacrylate, butyl acrylate, styrene, glycidyl methacrylate) copolymer	-	37953-21-2	857	66765	yes	no		Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 2 % at room temperature or below.	Details
STYRENE, POLYMER WITH 1,3-BUTADIENE, BUTYL ACRYLATE AND METHYL METHACRYLATE	843-371-1	25101-28-4	856	40563	yes	no		Only to be used in: rigid poly(vinyl chloride) (PVC) at a maximum level of 12 % at room temperature or below; or at up to 40 % w/w in blends of styrene acrylonitrile copolymer (SAN)/poly(methyl methacrylate) (PMMA) repeatuse articles at room temperature or below, and when either in contact only with aqueous, acidic and/or low alcoholic (< 20 %) foodstuffs for less than 1 day, or when in contact only with dry foodstuffs for any duration of time.	Details
(butadiene, styrene, methyl methacrylate) copolymer cross-linked with 1,3-butanediol dimethacrylate	-	-	855	40560	yes	no		Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 12 % at room temperature or below.	Details
perfluoro acetic acid, α-substituted with the copolymer of perfluoro-1,2-propylene glycol and perfluoro-1,1-ethylene glycol, terminated with chlorohexafluoropropyloxy groups	682-234-9	329238-24-6	854	71943	yes	no		Only to be used in concentrations up to 0,5 % w/w in the polymerisation of fluoropolymers that are processed at temperatures at or above 340 °C and are intended for use in repeated use articles.	Details
silicates, natural, silanated (with the exception of asbestos)	-	-	85	85610	yes	no			Details
silicates, natural (with the exception of asbestos)	-	-	84	85601	yes	no			Details
propylhydroxypropylcellulose	-	-	83	83330	yes	no			Details
5-sulphoisophthalic acid, salts	-	-	823	24889	no	no	5 mg/kg		Details
perchloric acid, salts	-	-	822	71938	yes	no			Details
Perchlorate	623-712-9	14797-73-0	822	71938	yes	no			Details
stearoyl-2-lactylic acid, salts	-	-	821	90810	yes	no			Details
pimelic acid, salts	-	-	820	76420	yes	no			Details
propylhydroxymethylcellulose	-	-	82	83325	yes	no			Details
neodecanoic acid, salts	248-093-9	26896-20-8	819	68110	yes	no	0.05 mg/kg	Not to be used in polymers contacting fatty foods. Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down. SML expressed as neodecanoic acid.	Details
methallylsulphonic acid, salts	-	-	818	21530	no	no	5 mg/kg		Details
cis-endo-bicyclo[2.2.1]heptane-2,3-dicarboxylic acid, salts	-	-	817	38507	yes	no	5 mg/kg	Not to be used with polyethylene in contact with acidic foods. Purity ≥ 96 %.	Details
cis-1,2-cyclohexanedicarboxylic acid, salts	-	-	816	45704	yes	no	5 mg/kg		Details
trimethylolpropane, mixed triesters and diesters with benzoic acid and 2-ethylhexanoic acid	-	-	815	94985	yes	no	5 mg/kg	Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.	Details
trimethylolpropane, mixed triesters and diesters with benzoic acid and 2-ethylhexanoic acid	-	-	815	94985	yes	no		Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.	Details
sulphosuccinic acid monoalkyl (C10-C16) polyethyleneglycol esters, salts	-	-	814	91815	yes	no	2 mg/kg		Details
sulphosuccinic acid alkyl (C4-C20) or cyclohexyl diesters, salts	-	-	813	91530	yes	no	5 mg/kg		Details
poly(12-hydroxystearic acid)-polyethyleneimine copolymer	630-556-5	124578-12-7	812	80350	yes	no		Only to be used in plastics up to 0,1 % w/w. Prepared by the reaction of poly(12-hydroxystearic acid) with polyethyleneimine.	Details
polyethylene waxes, oxidised	614-498-8	68441-17-8	811	80077	yes	no	60 mg/kg		Details
neopentyl glycol, diesters and monoesters with benzoic acid and 2-ethylhexanoic acid	-	-	810	68119	yes	no	5 mg/kg	Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.	Details
neopentyl glycol, diesters and monoesters with benzoic acid and 2-ethylhexanoic acid	-	-	810	68119	yes	no		Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.	Details
propylhydroxyethylcellulose	-	-	81	83320	yes	no			Details
N-(2,6-diisopropylphenyl)-6-[4-(1,1,3,3-tetramethylbutyl)phenoxy]-1H-benzo[de]isoquinolin-1,3(2H)-dione	-	852282-89-4	809	49080	yes	yes	0.05 mg/kg	Only for use in PET.	Details
bis(4-propylbenzylidene)propylsorbitol	618-128-6	882073-43-0	808	38550	yes	no	5 mg/kg	SML including the sum of its hydrolysis products.	Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of Bis(4-propylbenzylidene)propylsorbitol	-	-	808	38550	yes	no	5 mg/kg	SML including the sum of its hydrolysis products.	Details
titanium nitride	247-117-5	25583-20-4	807	93485	yes	no		No migration of titanium nitride nanoparticles. Only to be used in polyethelyne terephthalate (PET) bottles up to 20 mg/kg. In the PET, the agglomerates have a diameter of 100 - 500 nm consisting of primary titanium nitride nanoparticles; primary particles have a diameter of approximately 20 nm.	Details
titanium nitride	234-354-4	11116-16-8	807	93485	yes	no		No migration of titanium nitride nanoparticles. Only to be used in polyethelyne terephthalate (PET) bottles up to 20 mg/kg. In the PET, the agglomerates have a diameter of 100 - 500 nm consisting of primary titanium nitride nanoparticles; primary particles have a diameter of approximately 20 nm.	Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of 1,4-Cyclohexanedicarboxylic acid	-	-	806	14876	no	no	5 mg/kg	Only to be used for manufacture of polyesters.	Details
1,4-cyclohexanedicarboxylic acid	214-068-6	1076-97-7	806	14876	no	no	5 mg/kg	Only to be used for manufacture of polyesters.	Details
titanium dioxide, coated with a copolymer of n-octyltrichlorosilane and [aminotris(methylenephosphonic acid), penta sodium salt]	-	-	805	93450	yes	no		The content of the surface treatment copolymer of the coated titanium dioxide is less than 1 % w/w.	Details
poly(3-nonyl-1,1-dioxo-1-thiopropane-1,3-diyl)-block-poly(x-oleyl-7-hydroxy-1,5-diiminooctane-1,8-diyl), process mixture with x = 1 and/or 5, neutralised with dodecylbenzenesulfonic acid	-	1010121-89-7	804	80510	yes	no		Only to be used as polymer production aid in polyethylene (PE), polypropylene (PP) and polystyrene (PS).	Details
α-alkenes(C20-C24) copolymer with maleic anhydride, reaction product with 4-amino-2,2,6,6-tetramethylpiperidine	604-838-3	152261-33-1	803	33535	yes	no		Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down. Not to be used in contact with alcoholic foods.	Details
alcohols, C12-C14 secondary, β-(2-hydroxyethoxy), ethoxylated	604-520-4	146340-15-0	802	33105	yes	no	5 mg/kg		Details
acids, C2-C24, aliphatic, linear, monocarboxylic, from natural oils and fats, lithium salt	-	-	801	30607	yes	no			Details
triethyl phosphonoacetate	212-757-6	867-13-0	800	94425	yes	no		Only for use in PET.	Details
powders, flakes and fibres of brass, bronze, copper, stainless steel, tin, iron and alloys of copper, tin and iron	-	-	80	81760	yes	no			Details
acetylated mono- and diglycerides of fatty acids	-	-	8	30401	yes	no			Details
polyethyleneglycol (EO = 1-50) ethers of linear and branched primary (C8-C22) alcohols	-	-	799	77708	yes	no	1.8 mg/kg	In compliance with the maximum ethylene oxide content as laid down in the purity criteria for food additives in Commission Regulation (EU) No 231/2012.	Details
terephthalic acid, bis(2-ethylhexyl)ester	229-176-9	6422-86-2	798	92200	yes	no	60 mg/kg		Details
terephthalic acid, bis(2-ethylhexyl)ester	229-176-9	6422-86-2	798	92200	yes	no			Details
polyester of adipic acid with 1,3-butanediol, 1,2-propanediol and 2-ethyl-1-hexanol	843-673-3	73018-26-5	797	76807	yes	yes			Details
polyester of adipic acid with 1,3-butanediol, 1,2-propanediol and 2-ethyl-1-hexanol	843-673-3	73018-26-5	797	76807	yes	yes			Details
2,2'-(1,4-phenylene)bis[4H-3,1-benzoxazin-4-one] CYASORB(R) UV-3638 LIGHT STABILISER	418-280-1	18600-59-4	796	72141	yes	yes	0.05 mg/kg	SML including the sum of its hydrolysis products.	Details
N,N'-bis(2,2,6,6-tetramethyl-4-piperidyl)-N,N'-diformylhexamethylenediamine LICHTSCHUTZMITTEL 1736	413-610-0	124172-53-8	795	40155	yes	no	0.05 mg/kg		Details
glycolic acid	201-180-5	79-14-1	794	18117	no	no		Only to be used for manufacture of polyglycolic acid (PGA) for (i) indirect food contact behind polyesters such as polyethylene terephthalate (PET) or polylactic acid (PLA); and (ii) direct food contact of a blend of PGA up to 3 % w/w in PET or PLA.	Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of Glycolic acid	-	-	794	18117	no	no		Only to be used for manufacture of polyglycolic acid (PGA) for (i) indirect food contact behind polyesters such as polyethylene terephthalate (PET) or polylactic acid (PLA); and (ii) direct food contact of a blend of PGA up to 3 % w/w in PET or PLA.	Details
triethanolamine	203-049-8	102-71-6	793	94000	yes	no			Details
3,3',5,5'-tetrakis(tert-butyl)-2,2'-dihydroxybiphenyl, cyclic ester with [3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propyl]oxyphosphonous acid	-	203255-81-6	792	92475	yes	yes	5 mg/kg	SML expressed as the sum of phosphite and phosphate form of the substance and the hydrolysis products.	Details
N,N',N'',N''-tetrakis(4,6-bis(N-butyl-(N-methyl-2,2,6,6-tetramethylpiperidin-4-yl)amino)triazin-2-yl)-4,7-diazadecane-1,10-diamine CHIMASSORB 119; LOWILITE 19	401-990-0	106990-43-6	791	92470	yes	no	0.05 mg/kg		Details
poly(6-morpholino-1,3,5-triazine-2,4-diyl)-[(2,2,6,6-tetramethyl-4-piperidyl)imino)] hexa-methylene-[(2,2,6,6-tetramethyl-4-piperidyl)imino)]	-	90751-07-8	790	80480	yes	no	5 mg/kg	Average molecular weight not less than 2400 Da. Residual content of morpholine ≤ 30 mg/kg, of N,N'-bis(2,2,6,6-tetramethylpiperidin-4-yl)hexane-1,6-diamine < 15000 mg/kg, and of 2,4-dichloro-6-morpholino-1,3,5-triazine ≤ 20 mg/kg.	Details
1,6-hexanediamine, N1,N6-bis(2,2,6,6-tetramethyl-4-piperidinyl)-, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine	617-335-9	82451-48-7	790	80480	yes	no	5 mg/kg	Average molecular weight not less than 2400 Da. Residual content of morpholine ≤ 30 mg/kg, of N,N'-bis(2,2,6,6-tetramethylpiperidin-4-yl)hexane-1,6-diamine < 15000 mg/kg, and of 2,4-dichloro-6-morpholino-1,3,5-triazine ≤ 20 mg/kg.	Details
polyoxyalkyl (C2-C4) dimethylpolysiloxane	-	-	79	80640	yes	no			Details
hydrogenated homopolymers and/or copolymers made of 1-hexene and/or 1-octene and/or 1-decene and/or 1-dodecene and/or 1-tetradecene (Mw: 440-12000)	-	-	789	60027	yes	no		Average molecular weight not less than 440 Da. Viscosity at 100 °C not less than 3,8 cSt (3,8 × 10-6 m2/s).	Details
[3-(methacryloxy)propyl]trimethoxysilane	219-785-8	2530-85-0	788	21498	no	no	0.05 mg/kg	Only to be used as a surface treatment agent of inorganic fillers.	Details
4-chlorophthalic anhydride	204-251-9	118-45-6	787	14628	no	no	0.05 mg/kg	SML expressed as 4-chlorophthalic acid.	Details
3-chlorophthalic anhydride	204-179-8	117-21-5	786	14627	no	no	0.05 mg/kg	SML expressed as 3-chlorophthalic acid.	Details
terephthalic acid	202-830-0	100-21-0	785	24910	no	no			Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of Terephthalic acid	-	-	785	24910	no	no			Details
1,3,5-tris (2,2-dimethylpropanamido)benzene	456-830-2	745070-61-5	784	95420	yes	no	5 mg/kg		Details
glycerides, castor-oil mono-, hydrogenated, acetates	451-530-8	736150-63-3	783	55910	yes	no			Details
polydimethylsiloxane, 3-aminopropyl terminated, polymer with 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane	-	661476-41-1	782	76725	yes	no		The fraction with molecular weight below 1000 Da shall not exceed 1 % (w/w).	Details
1,3,5-tris(4-benzoylphenyl) benzene	-	227099-60-7	781	95265	yes	no	0.05 mg/kg		Details
poly-[[6-[N-(2,2,6,6-tetramethyl-4-piperidinyl)-n-butylamino]-1,3,5-triazine-2,4-diyl][(2,2,6,6-tetramethyl-4-piperidinyl)imino]-1,6-hexanediyl[(2,2,6,6-tetramethyl-4-piperidinyl)imino]]-α-[N,N,N',N'-tetrabutyl-N''-(2,2,6,6-tetramethyl-4-piperidinyl)-N''-[6-(2,2,6,6-tetramethyl-4-piperidinylamino)-hexyl]-[1,3,5-triazine-2,4,6-triamine]-ω-N,N,N',N'-tetrabutyl-1,3,5-triazine-2,4-diamine]	606-265-4	192268-64-7	780	81220	yes	no	5 mg/kg		Details
polyethyleneglycol (EO = 1-50) monoalkylether (linear and branched, C8-C20) sulphate, salts	-	-	78	77897	yes	no	5 mg/kg		Details
9,9-bis(methoxymethyl)fluorene	682-678-3	182121-12-6	779	39815	yes	yes	0.05 mg/kg		Details
pentaerythritol tetrakis (2-cyano-3,3-diphenylacrylate)	429-160-3	178671-58-4	778	71670	yes	yes	0.05 mg/kg		Details
acrylic acid, methyl ester, telomer with 1-dodecanethiol, C16-C18 alkyl esters	-	174254-23-0	777	31542	yes	no		0,5 % in final product.	Details
polydimethylsiloxane, 3-aminopropyl terminated, polymer with dicyclohexylmethane-4,4'-diisocyanate	-	167883-16-1	776	76723	yes	no		The fraction with molecular weight below 1000 Da shall not exceed 1,5 % (w/w).	Details
1,2-cyclohexanedicarboxylic acid, diisononyl ester	431-890-2	166412-78-8	775	45705	yes	no			Details
2,4,6-tris(tert-butyl)phenyl-2-butyl-2-ethyl-1,3-propanediol phosphite	423-560-1	161717-32-4	774	95270	yes	yes	2 mg/kg	SML expressed as sum of phosphite, phosphate and the hydrolysis product = TTBP.	Details
bis(2,4-dicumylphenyl)pentaerythritol-diphosphite	421-920-2	154862-43-8	773	38840	yes	yes	5 mg/kg	SML expressed as sum of the substance itself, its oxidised form bis(2,4-dicumylphenyl)pentaerythritol-phosphate and its hydrolysis product (2,4-dicumylphenol).	Details
N,N'-dicyclohexyl-2,6-naphthalene dicarboxamide	-	153250-52-3	772	47500	yes	no	5 mg/kg		Details
aluminium hydroxybis [2,2'-methylenebis (4,6-di-tert-butylphenyl) phosphate]	430-650-4	151841-65-5	771	34650	yes	no	5 mg/kg		Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of 2-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-(hexyloxy)phenol	-	-	770	51700	yes	no	0.05 mg/kg		Details
2-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-(hexyloxy)phenol CG 30-1577	411-380-6	147315-50-2	770	51700	yes	no	0.05 mg/kg		Details
polyethyleneglycol (EO = 1-30, typically 5) ether of butyl-2-cyano-3-(4-hydroxyphenyl) acrylate	-	-	77	77733	yes	no	0.05 mg/kg	Only for use in PET.	Details
phosphorous acid, bis(2,4-di-tert-butyl-6-methylphenyl) ethyl ester IRGAFOS 38	416-140-4	145650-60-8	769	74010	yes	yes	5 mg/kg	SML expressed as sum of phosphite and phosphate.	Details
amines, bis(hydrogenated tallow alkyl) oxidised	418-370-0	143925-92-2	768	34850	yes	no		Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down. Only to be used in: (a)polyolefins at 0,1 % (w/w) concentration and in(b)PET at 0,25 % (w/w) concentration.	Details
1,2-bis(3-aminopropyl)ethylenediamine, polymer with N-butyl-2,2,6,6-tetramethyl-4-piperidinamine and 2,4,6-trichloro-1,3,5-triazine	500-311-6	136504-96-6	767	38510	yes	no	5 mg/kg		Details
bis(3,4-dimethylbenzylidene)sorbitol	413-110-2	135861-56-2	766	38879	yes	no			Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of Bis(3,4-dimethylbenzylidene)sorbitol	-	-	766	38879	yes	no			Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of 2,4-Dimethyl-6-(1-methylpentadecyl)phenol	-	-	765	49485	yes	yes	1 mg/kg		Details
2,4-dimethyl-6-(1-methylpentadecyl)phenol CG 27-145	411-220-5	134701-20-5	765	49485	yes	yes	1 mg/kg		Details
N,N'-bis[4-(ethoxycarbonyl)phenyl]-1,4,5,8-naphthalenetetracarboxydiimide	-	132459-54-2	764	13317	no	no	0.05 mg/kg	Purity > 98,1 % (w/w). Only to be used as co-monomer (max 4 %) for polyesters (PET, PBT).	Details
3,3-bis(methoxymethyl)-2,5-dimethylhexane	430-800-9	129228-21-3	763	39925	yes	yes	0.05 mg/kg		Details
acrylic acid, 2,4-di-tert-pentyl-6-(1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl)phenyl ester SUMILIZER GS	413-850-6	123968-25-2	762	31530	yes	yes	5 mg/kg		Details
thiodiethanolbis(5-methoxycarbonyl-2,6-dimethyl-1,4-dihydropyridine-3-carboxylate) SYNESAL M	404-440-8	120218-34-0	761	92930	yes	no	6 mg/kg		Details
reaction product of di-tert-butylphosphonite with biphenyl, obtained by condensation of 2,4-di-tert-butylphenol with Friedel Craft reaction product of phosphorous trichloride and biphenyl	432-130-2	119345-01-6	760	83595	yes	no	18 mg/kg	Composition: 4,4'-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No 0038613-77-3) (36-46 % w/w ()),4,3'-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No 0118421-00-4) (17-23 % w/w ()),3,3'-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No 0118421-01-5) (1-5 % w/w ()),4-biphenylene-0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS No 0091362-37-7) (11-19 % w/w ()),tris(2,4-di-tert-butylphenyl)phosphite (CAS No 0031570-04-4) (9-18 % w/w ()),4,4'-biphenylene-0,0-bis(2,4-di-tert-butylphenyl)phosphonate-0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS No 0112949-97-0) (< 5 % w/w ())(*)Quantity of substance used/quantity of formulationOther specifications: Phosphor content of min. 5,4 % to max. 5,9 %,Acid value of max. 10 mg KOH per gram,Melt range of 85- 110 °C.	Details
polyethylene glycol (EO = 1-30, typically 5) ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate	-	-	76	77732	yes	no	0.05 mg/kg	Only for use in PET.	Details
2,2'-ethylidenebis(4,6-di-tert-butylphenyl) fluorophosphonite	403-020-1	118337-09-0	759	54300	yes	yes	6 mg/kg		Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of 2,4-Bis(dodecylthiomethyl)-6-methylphenol	-	-	758	38940	yes	yes			Details
2,4-bis(dodecylthiomethyl)-6-methylphenol	438-600-3	110675-26-8	758	38940	yes	yes			Details
vermiculite, reaction product with citric acid, lithium salt MICROLITE (R) POWDER; MICROLITE (R) VERMICULITE DISPERSIONS; MICROLITE POWDER; MICROLITE SPECIALITY VERMICULITE; MICROLITE VERMICULITE DISPERSIONS; MICROLITE-VERMICULITDISPERSIONEN	406-060-8	110638-71-6	757	95725	yes	no			Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of 2,4-Bis(octylthiomethyl)-6-methylphenol	-	-	756	40020	yes	yes			Details
2,4-bis(octylthiomethyl)-6-methylphenol CG 25-1320; IRGANOX 1520; TK 12229/1	402-860-6	110553-27-0	756	40020	yes	yes			Details
4,4'-methylenebis(3-chloro-2,6-diethylaniline)	402-130-7	106246-33-7	755	21765	no	no	0.05 mg/kg		Details
glycerol dibehenate	-	99880-64-5	754	56020	yes	no			Details
kaolin, calcined The product of high temperature calcination (above 450°C (842°F)) of naturally occurring kaolin, a hydrated aluminum silicate, resulting in the evolution of water and the formation of new substances depending upon the calcination temperatures employed.	296-473-8	92704-41-1	753	62800	yes	no			Details
di(p-tolylidene)sorbitol	611-185-8	54686-97-4	752	39890	yes	no			Details
bis(methylbenzylidene)sorbitol	-	69158-41-4	752	39890	yes	no			Details
bis(methylbenzylidene)sorbitol CLEARLITE NU 005; DISORBENE M; GENISET MD; GLC NU 005; MILLAD 3940; NU 005	402-950-5	87826-41-3	752	39890	yes	no			Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of Di(p-tolylidene)sorbitol	-	-	752	39890	yes	no			Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of Bis(methylbenzylidene)sorbitol	-	-	752	39890	yes	no			Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of (1,3:2,4) diparamethyldibenylidene sorbitol	-	-	752	39890	yes	no			Details
(1,3:2,4) diparamethyldibenylidene sorbitol	617-241-8	81541-12-0	752	39890	yes	no			Details
poly(zinc glycerolate)	700-107-9	87189-25-1	751	81515	yes	no			Details
2,2'-methylenebis(4,6-di-tert-butylphenyl) lithium phosphate	617-688-9	85209-93-4	750	66350	yes	no	5 mg/kg		Details
polyethyleneglycol esters of aliph. monocarb. acids (C6-C22) and their ammonium and sodium sulphates	-	-	75	77702	yes	no			Details
2,2'-methylene bis(4,6-di-tert-butylphenyl) sodium phosphate	286-344-4	85209-91-2	749	66360	yes	yes	5 mg/kg		Details
N-(2-aminoethyl)-β-alanine, sodium salt	282-811-1	84434-12-8	748	12765	no	no	0.05 mg/kg		Details
di-n-dodecyltin bis(isooctyl mercaptoacetate)	281-837-0	84030-61-5	747	47600	yes	yes			Details
bis(2,6-di-tert-butyl-4-methylphenyl)pentaerythritol diphosphite ADK STAB PEP-36	410-290-4	80693-00-1	746	38810	yes	yes	5 mg/kg	SML expressed as sum of phosphite and phosphate.	Details
2,2',2'-nitrilo(triethyl tris(3,3',5,5'-tetra-tert-butyl-1,1'-bi-phenyl-2,2'-diyl)phosphite)	279-459-6	80410-33-9	745	68145	yes	yes	5 mg/kg	SML expressed as sum of phosphite and phosphate.	Details
3-hydroxybutanoic acid-3-hydroxypentanoic acid, copolymer	616-996-0	80181-31-3	744	18888	no	no		The substance is used as product obtained by bacterial fermentation. In compliance with the specifications mentioned in the Table 4 of Annex I.	Details
bis(4-ethylbenzylidene)sorbitol NC-4	406-176-9	79072-96-1	743	38950	yes	no			Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of Bis(4-ethylbenzylidene)sorbitol	-	-	743	38950	yes	no			Details
2,2,4,4-tetramethyl-20-(2,3-epoxypropyl)-7-oxa-3,20-diazadispiro-[5.1.11.2]-heneicosan-21-one, polymer	-	78301-43-6	742	92700	yes	yes	5 mg/kg		Details
resin acids and rosin acids	277-299-1	73138-82-6	741	83610 24070	yes	no			Details
poly[6-[(1,1,3,3-tetramethylbutyl)amino]-1,3,5-triazine-2,4-diyl]-[(2,2,6,6-tetramethyl-4-piperidyl)-imino]hexamethylene[(2,2,6,6-tetramethyl-4-piperidyl) imino]	615-678-9	71878-19-8	740	81200	yes	yes	3 mg/kg		Details
polyethyleneglycol diricinoleate	-	-	74	77440	yes	yes	42 mg/kg		Details
2,2'-oxamidobis[ethyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate]	274-572-7	70331-94-1	739	70000	yes	no			Details
2-[2-hydroxy-3,5-bis(1,1-dimethylbenzyl)phenyl]benzotriazole	274-570-6	70321-86-7	738	60320	yes	yes	1.5 mg/kg		Details
polyethyleneglycol-30 dipolyhydroxystearate	680-598-3	70142-34-6	737	77370	yes	no			Details
di-n-octyltin ethyleneglycol bis(mercaptoacetate)	260-414-4	56875-68-4	736	50960	yes	no			Details
bis(polyethyleneglycol)hydroxymethylphosphonate	614-830-1	68951-50-8	735	40120	yes	no	0.6 mg/kg		Details
diatomaceous earth, soda ash flux-calcined	272-489-0	68855-54-9	734	46380	yes	no			Details
acids, fatty, unsaturated (C18), dimers, hydrogenated, distilled and non-distilled	500-231-1	68783-41-5	733	10599/93 10599/92A	no	no			Details
p-cresol-dicyclopentadiene-isobutylene, copolymer	271-867-2	68610-51-5	732	45450	yes	yes	5 mg/kg		Details
N-heptylaminoundecanoic acid	271-487-7	68564-88-5	731	18220	no	no	0.05 mg/kg		Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of N-Heptylaminoundecanoic acid	-	-	731	18220	no	no	0.05 mg/kg		Details
methylsilsesquioxane	614-610-5	68554-70-1	730	66930	yes	no		Residual monomer in methylsilsesquioxane: < 1 mg methyltrimethoxysilane/kg of methylsilsesquioxane.	Details
polyesters of 1,2-propanediol and/or 1,3- and/or 1,4-butanediol and/or polypropyleneglycol with adipic acid, which may be end-capped with acetic acid or fatty acids C12-C18 or n-octanol and/or n-decanol (Group Restriction No: 32)	-	-	73	76866	yes	yes			Details
polyesters of 1,2-propanediol and/or 1,3- and/or 1,4-butanediol and/or polypropyleneglycol with adipic acid, which may be end-capped with acetic acid or fatty acids C12-C18 or n-octanol and/or n-decanol	-	-	73	76866	yes	yes			Details
phthalic acid, diesters with primary, saturated C9-C11 alcohols more than 90 % C10 show/hide 2,5-dimethylheptyl 6-methyloctyl phthalate EC / List no: 288-636-7 \| CAS no: 85851-77-0 3-ethylheptyl 6-methyloctyl phthalate EC / List no: 288-639-3 \| CAS no: 85851-80-5 3-ethylheptyl 2,5-dimethylheptyl phthalate EC / List no: 307-707-6 \| CAS no: 97692-55-2 Bis(2-methyldecyl) phthalate EC / List no: 288-643-5 \| CAS no: 85851-83-8 Bis(4-methyloctyl) phthalate EC / List no: 286-804-4 \| CAS no: 85391-50-0 Bis(2-methyloctyl) phthalate EC / List no: 274-944-9 \| CAS no: 70857-56-6 Diisoundecyl phthalate EC / List no: 306-165-8 \| CAS no: 96507-86-7 Bis(8-methylnonyl) phthalate EC / List no: 201-884-2 \| CAS no: 89-16-7 Bis(2-ethyloctyl) phthalate EC / List no: 288-640-9 \| CAS no: 85851-81-6 Di-''isononyl'' phthalate EC / List no: 249-079-5 \| CAS no: 28553-12-0 Bis(2-propylhexyl) phthalate EC / List no: 288-644-0 \| CAS no: 85851-84-9 Isodecyl isononyl phthalate EC / List no: 285-916-0 \| CAS no: 85168-75-8 Bis(3,5,5-trimethylhexyl) phthalate EC / List no: 237-954-4 \| CAS no: 14103-61-8 Isodecyl isoundecyl phthalate EC / List no: 305-701-8 \| CAS no: 94979-22-3 3-ethylheptyl 4-methyloctyl phthalate EC / List no: 288-638-8 \| CAS no: 85851-79-2 Isononyl isoundecyl phthalate EC / List no: 285-920-2 \| CAS no: 85168-79-2 Bis(2,5-dimethylheptyl) phthalate EC / List no: 286-802-3 \| CAS no: 85391-48-6 Bis(3-ethylheptyl) phthalate EC / List no: 286-806-5 \| CAS no: 85391-51-1 Bis(2-propyloctyl) phthalate EC / List no: 288-645-6 \| CAS no: 85851-85-0 2,5-dimethylheptyl 4-methyloctyl phthalate EC / List no: 288-635-1 \| CAS no: 85851-76-9 4-methyloctyl 6-methyloctyl phthalate EC / List no: 288-637-2 \| CAS no: 85851-78-1 Bis(2-propylheptyl) phthalate EC / List no: 258-469-4 \| CAS no: 53306-54-0 Bis(2-ethylnonyl) phthalate EC / List no: 288-641-4 \| CAS no: 85851-82-7 Bis(2-ethylheptyl) phthalate EC / List no: 274-344-7 \| CAS no: 70152-36-2 Bis(6-methyloctyl) phthalate EC / List no: 286-803-9 \| CAS no: 85391-49-7 Di-''isodecyl'' phthalate EC / List no: 247-977-1 \| CAS no: 26761-40-0	-	-	729	75105	yes	no		Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae as defined by Directive 2006/141/EC or processed cereal-based foods and baby foods for infants and young children as defined by Directive 2006/125/EC;(c)technical support agent in concentrations up to 0,1 % in the final product.	Details

Showing 1 - 200 of 1,080 results.

Export search results to: