plastic-material-food-contact
plastic-material-food-contact
FCM and Articles Regulation, Annex I - Authorised Substances
EU. Union List of Authorized Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation (EU) 2023/1627, OJ L 201, 11 August 2023
This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.
Last updated 25 April 2024. Database contains 1080 unique substances/entries.
Filter the list
|
219-547-3
|
2459-10-1
|
971 |
25885 |
no |
no |
Only to be used as a co-monomer up to 0,35 % w/w to produce modified polyesters intended to be used in contact with aqueous and dry foodstuffs containing no free fat at the surface. |
Details | ||
|
-
|
-
|
97 |
72081/10 |
yes |
no |
Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermalpolymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing. Properties: Viscosity at 120 °C: > 3 Pa.s,Softening point: > 95 °C as determined by ASTM Method E 28-67,Bromine number: < 40 (ASTM D1159),The colour of a 50 % solution in toluene < 11 on the Gardner scale,Residual aromatic monomer ≤ 50 ppm. |
Details | ||
|
429-840-1
|
24937-78-8
|
969 |
yes |
no |
Only to be used as a polymeric additive up to 2 % w/w in polyolefins. The migration of low molecular weight oligomeric fraction below 1 000 Da shall not exceed 5 mg/kg food. |
Details | |||
|
-
|
-
|
95 |
95883 |
yes |
no |
Average molecular weight not less than 480 Da. Viscosity at 100 °C not less than 8,5 cSt (8,5 × 10-6 m2/s). Content of mineral hydrocarbons with Carbon number less than 25, not more than 5 % (w/w) |
Details | ||
|
-
|
-
|
94 |
95859 |
yes |
no |
Average molecular weight not less than 500 Da. Viscosity at 100 °C not less than 11 cSt (11 × 10-6 m2/s). Content of mineral hydrocarbons with Carbon number less than 25, not more than 5 % (w/w) |
Details | ||
|
-
|
-
|
93 |
95858 |
yes |
no |
0.05 mg/kg |
Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down. Average molecular weight not less than 350 Da. Viscosity at 100 °C not less than 2,5 cSt (2,5 × 10-6 m2/s). Content of hydrocarbons with Carbon number less than 25, not more than 40 % (w/w). |
Details | |
|
700-323-3
|
908020-52-0
|
926 |
71955 |
yes |
no |
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures higher than 300 °C for at least 10 minutes. |
Details | ||
|
-
|
-
|
924 |
94987 |
yes |
no |
0.05 mg/kg |
Only for use in PET in contact with all types of foods other than fatty, high- alcoholic and dairy products. |
Details | |
|
204-393-1
|
120-40-1
|
923 |
39150 |
yes |
no |
5 mg/kg |
The residual amount of diethanolamine in plastics, as an impurity and decomposition product of the substance, shall not result in a migration of diethanolamine higher than 0,3 mg/kg food. |
Details | |
|
-
|
-
|
92 |
93970 |
yes |
no |
0.05 mg/kg |
Details | ||