plastic-material-food-contact
plastic-material-food-contact
FCM and Articles Regulation, Annex I - Authorised Substances
EU. Union List of Authorized Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation (EU) 2023/1627, OJ L 201, 11 August 2023
This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.
Last updated 13 May 2024. Database contains 1080 unique substances/entries.
Filter the list
|
293-728-5
|
91082-17-6
|
884 |
34240 |
yes |
no |
0.05 mg/kg |
Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down. |
Details | |
|
224-709-1
|
4457-71-0
|
883 |
22074 |
no |
no |
0.05 mg/kg |
Only to be used in materials in contact with food at a surface to mass ratio up to 0,5 dm2/kg. |
Details | |
|
-
|
-
|
882 |
25872 |
no |
no |
0.05 mg/kg |
Details | ||
|
219-330-3
|
2416-94-6
|
882 |
25872 |
no |
no |
0.05 mg/kg |
Details | ||
|
-
|
-
|
881 |
25187 |
no |
no |
5 mg/kg |
Only for: (a) repeated use articles for long term storage at room temperature or below and hotfill; (b) single use materials and articles as a co-monomer at a maximum use level of 35 mole % of the diol component of polyesters, and if such materials and articles are for long term storage at room temperature or below of food types which have an alcohol content of up to 10 % and for which Table 2 of Annex III does not assign simulant D2. Hot fill conditions are allowed for such single use materials and articles. |
Details | |
|
221-140-0
|
3010-96-6
|
881 |
25187 |
no |
no |
5 mg/kg |
Only for: (a) repeated use articles for long term storage at room temperature or below and hotfill; (b) single use materials and articles as a co-monomer at a maximum use level of 35 mole % of the diol component of polyesters, and if such materials and articles are for long term storage at room temperature or below of food types which have an alcohol content of up to 10 % and for which Table 2 of Annex III does not assign simulant D2. Hot fill conditions are allowed for such single use materials and articles. |
Details | |
|
-
|
-
|
880 |
31348 |
yes |
no |
Details | |||
|
-
|
-
|
88 |
86880 |
yes |
no |
9 mg/kg |
Details | ||
|
-
|
-
|
879 |
31336 |
yes |
no |
Details | |||
|
-
|
-
|
878 |
31335 |
yes |
no |
Details | |||