plastic-material-food-contact

FCM and Articles Regulation, Annex I - Authorised Substances

EU. Union List of Authorised Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation 2020/1245/EU, 3 September 2020

This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.

Last updated 24 June 2022. Database contains 1072 unique substances/entries.
Filter the list

 
219-547-3
2459-10-1
971
25885
no
no
Only to be used as a co-monomer up to 0,35 % w/w to produce modified polyesters intended to be used in contact with aqueous and dry foodstuffs containing no free fat at the surface.
Details
-
-
97
72081/10
yes
no
Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermalpolymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing.
Properties: Viscosity at 120 °C: > 3 Pa.s,Softening point: > 95 °C as determined by ASTM Method E 28-67,Bromine number: < 40 (ASTM D1159),The colour of a 50 % solution in toluene < 11 on the Gardner scale,Residual aromatic monomer ≤ 50 ppm.
Details
Substance identity is confidential or pending assessment. If possible, following assessment the proper substance identifiers will be displayed.
-
-
969
yes
no
Only to be used as a polymeric additive up to 2 % w/w in polyolefins.
The migration of low molecular weight oligomeric fraction below 1 000 Da shall not exceed 5 mg/kg food.
Details
-
-
96
95920
yes
no
Details
-
-
95
95883
yes
no
Average molecular weight not less than 480 Da.
Viscosity at 100 °C not less than 8,5 cSt (8,5 × 10-6 m2/s).
Content of mineral hydrocarbons with Carbon number less than 25, not more than 5 % (w/w)
Details
-
-
94
95859
yes
no
Average molecular weight not less than 500 Da.
Viscosity at 100 °C not less than 11 cSt (11 × 10-6 m2/s).
Content of mineral hydrocarbons with Carbon number less than 25, not more than 5 % (w/w)
Details
-
-
93
95858
yes
no
0.05 mg/kg
Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.
Average molecular weight not less than 350 Da. Viscosity at 100 °C not less than 2,5 cSt (2,5 × 10-6 m2/s). Content of hydrocarbons with Carbon number less than 25, not more than 40 % (w/w).
Details
700-323-3
908020-52-0
926
71955
yes
no
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures higher than 300 °C for at least 10 minutes.
Details
-
-
924
94987
yes
no
0.05 mg/kg
Only for use in PET in contact with all types of foods other than fatty, high- alcoholic and dairy products.
Details
204-393-1
120-40-1
923
39150
yes
no
5 mg/kg
The residual amount of diethanolamine in plastics, as an impurity and decomposition product of the substance, shall not result in a migration of diethanolamine higher than 0,3 mg/kg food.
Details

Export search results to: