plastic-material-food-contact
plastic-material-food-contact
FCM and Articles Regulation, Annex I - Authorised Substances
EU. Union List of Authorized Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation (EU) 2023/1627, OJ L 201, 11 August 2023
This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.
Last updated 24 April 2024. Database contains 1080 unique substances/entries.
Filter the list
|
201-873-2
|
88-99-3
|
192 |
23187 |
no |
no |
Details | |||
|
201-873-2
|
88-99-3
|
165 |
23200 74480 |
yes |
no |
Details | |||
|
250-709-6
|
31570-04-4
|
671 |
74240 |
yes |
no |
Details | |||
|
843-672-8
|
1227937-46-3
|
1076 |
yes |
no |
0.05 mg/kg |
Only to be used (a)as an additive at up to 0.2 % w/w in high impact polystyrene materials and articles intended for contact with food at room temperature and below, including hot-fill and/or heating up to 100 ° C for up to 2 hours. It shall not be used in contact with foods for which simulant C and/or D1 is assigned in Annex III; (b)as an additive at up to 0.025 % w/w in acrylonitrile-butadiene-styrene (ABS) materials for use at room temperature and below. |
Details | ||
|
204-552-5
|
122-52-1
|
293 |
23175 |
no |
no |
0.01 mg/kg |
1 mg/kg in final product. |
Details | |
|
204-118-5
|
115-96-8
|
280 |
73720 |
yes |
no |
0.01 mg/kg |
Details | ||
|
258-053-2
|
52628-03-2
|
1082 |
no |
no |
0.05 mg/kg |
Only to be used at up to 0,35 % (w/w) to manufacture polymethylmethacrylate. |
Details | ||
|
231-633-2
|
7664-38-2
|
509 |
23170 72640 |
yes |
no |
Details | |||
|
203-632-7
|
108-95-2
|
241 |
22960 |
no |
no |
3 mg/kg |
Details | ||
|
-
|
-
|
97 |
72081/10 |
yes |
no |
Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermalpolymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing. Properties: Viscosity at 120 °C: > 3 Pa.s,Softening point: > 95 °C as determined by ASTM Method E 28-67,Bromine number: < 40 (ASTM D1159),The colour of a 50 % solution in toluene < 11 on the Gardner scale,Residual aromatic monomer ≤ 50 ppm. |
Details | ||