plastic-material-food-contact

FCM and Articles Regulation, Annex I - Authorised Substances

EU. Union List of Authorised Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation 2020/1245/EU, 3 September 2020

This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.

Last updated 21 September 2021. Database contains 1072 unique substances/entries.
Filter the list

 
215-222-5
1314-13-2
1050
yes
no
Only to be used in unplasticised polymers.
view-details
215-222-5
1314-13-2
1046
yes
no
Only to be used in unplasticised polymers.
The restrictions and specifications specified for FCM substance No 788 shall be respected.
view-details
254-413-8
39318-18-8
1064
yes
no
0.05 mg/kg
Stoichiometry: WOn, n = 2,72-2,90.
view-details
257-757-7
7695-91-2
1055
yes
no
Only to be used as antioxidant in polyolefins.
view-details
-
-
1077
yes
no
Only to be used at up to 25.0 % w/w, including in the nanoform.
view-details
-
147398-31-0
1059
no
no
Only to be used either alone or blended with other polymers in contact with all foods under contact conditions of up to 6 months and/or 6 months and more, at room temperature or below, including hot fill or a short heating up phase.
The migration of all oligomers with a molecular weight below 1 000 Da shall not exceed 5,0 mg/kg food.
view-details
843-672-8
1227937-46-3
1076
yes
no
0.05 mg/kg
Only to be used as an additive at up to 0.2 % w/w in high impact polystyrene materials and articles intended contact with food at room temperature and below, including hot-fill and/or heating up to 100 ° C for up to 2 hours. It shall not be used in contact with foods for which simulant C and/or D1 is assigned in Annex III.
view-details
682-238-0
1190931-27-1
1045
yes
no
Only to be used as a polymer production aid during the manufacture of fluoropolymers under high temperature conditions of at least 370 °C.
view-details
419-710-0
42774-15-2
1051
yes
no
5 mg/kg
view-details
-
-
1075
yes
no
Only to be used as additive at up to 4.0 % w/w in polylactic acid plastics intended for long-term storage of water at ambient temperature or below. Can form platelets in the nanoform that are in one or two dimensions thinner than 100 nm. Such platelets shall be oriented parallel to the polymer surface and shall be fully embedded in the polymer.
view-details
-
-
1030
yes
no
0.05 mg/kg
Only to be used up to 12 % (w/w) in polyolefins in contact with dry foods to which simulant E is assigned in table 2 of Annex III at room temperature or below.
The sum of the specific migration of 1-chlorohexadecane and 1-chlorooctadecane shall not exceed 0,05 mg/kg food.
Can contain platelets in the nanoform that are only in one dimension thinner than 100 nm. Such platelets shall be oriented parallel to the polymer surface and shall be fully embedded in the polymer.
view-details
288-287-0
85711-28-0
1065
yes
no
5 mg/kg
Only to be used in the manufacture of articles made of polyolefins, and which do not come into contact with foods for which food simulant D2 is assigned in Table 2 of Annex III.
view-details
-
-
1062
no
no
Only to be used for the production of recycled PET and at up to 0,12 % (w/w).
view-details
200-857-2
75-28-5
1069
yes
no
Only to be used as a blowing agent.
view-details
-
-
1060
yes
no
Only to be used at room temperature or below in contact with foods for which Table 2 of Annex III assigns food simulant E.
The seed hulls shall be obtained from sunflower seeds that are fit for human consumption.
The processing temperature of the plastic containing the additive shall not exceed 240 °C.
view-details
221-800-8
3238-40-2
1031
no
no
5 mg/kg
Only to be used as a monomer in the production of polyethylene furanoate.
The migration of the oligomeric fraction of less than 1 000 Da shall not exceed 50 µg/kg food (expressed as furan-2,5-dicarboxylic acid).
view-details
-
-
1053
yes
no
Only to be used when produced from a fatty acid precursor that is obtained from edible fats or oils.
view-details
607-457-0
24937-78-8
969
yes
no
Only to be used as a polymeric additive up to 2 % w/w in polyolefins.
The migration of low molecular weight oligomeric fraction below 1 000 Da shall not exceed 5 mg/kg food.
view-details
210-826-5
624-03-3
1048
yes
no
Only to be used when produced from a fatty acid precursor that is obtained from edible fats or oils.
view-details
-
287916-86-3
871
yes
no
Only to be used in polyolefins at levels of up to 20 weight %. These polyolefins shall only be used in contact with foods for which Table 2 of Annex III assigns food simulant E, at ambient temperature or below, and when migration of the total oligomeric fraction of less than 1 000 Da does not exceed 50 µg/kg food.
view-details
210-478-4
616-38-6
1067
no
no
Only to be used: a) with 1,6-hexanediol in the manufacture of polycarbonate pre-polymers that are used at up to 30 % to manufacture thermoplastic polyurethanes with 4,4'-methylenediphenyldiisocyanate and diols, such as polypropylene glycol and 1,4-butanediol. The resulting material shall only be applied in repeated use articles intended to come into short-term contact (≤ 30 min at room temperature) with food for which simulants A and/or B are assigned in Table 2 of Annex III; or b) for the production of other polycarbonates and/or under other conditions provided that the migration of dimethyl carbonate does not exceed 0,05 mg/kg food and that the migration of all polycarbonate oligomers with a molecular weight below 1 000 Da together does not exceed 0,05 mg/kg food.
view-details
213-551-9
976-56-7
1007
no
no
Only to be used up to 0,2 % w/w based on the final polymer weight in the polymerisation process to manufacture poly(ethylene terephthalate) (PET).
view-details
Substance identity is confidential or pending assessment. If possible, following assessment the proper substance identifiers will be displayed.
-
-
1017
yes
no
To be processed under conditions preventing the decomposition of the substance and up to a maximum temperature of 275 °C.
view-details
200-405-4
58-95-7
1055
yes
no
Only to be used as antioxidant in polyolefins.
view-details
-
-
1031
no
no
5 mg/kg
Only to be used as a monomer in the production of polyethylene furanoate.
The migration of the oligomeric fraction of less than 1 000 Da shall not exceed 50 µg/kg food (expressed as furan-2,5-dicarboxylic acid).
view-details
219-784-2
2530-83-8
1068
no
no
Only to be used as a component of a sizing agent to treat glass fibres to be embedded in glass-fibre-reinforced low diffusivity plastics (polyethylene terephthalate (PET), polycarbonate (PC), polybutylene terephthalate (PBT), thermoset polyesters and epoxy bisphenol vinylester) in contact with all foodstuffs. In treated glass fibres, residues of the substance must not be detectable at 0,01 mg/kg for the substance and 0,06 mg/kg for each of the reaction products (hydrolysed monomers and epoxy-containing cyclic dimer, trimer and tetramer).
view-details
-
37486-69-4
903
yes
no
Only to be used as a polymer production aid in the polymerisation of fluoropolymers intended for: (a) repeated and single use materials and articles when sintered or processed (non-sintered) at temperatures at or above 360 °C for at least 10 minutes or at higher temperatures for equivalent shorter times; (b) repeated use materials and articles when processed (non-sintered) at temperatures from 300 °C and up to 360 °C for at least 10 minutes.
view-details
455-890-7
6607-41-6
872
no
no
0.05 mg/kg
To be used only as a co-monomer in polycarbonate copolymers.
view-details
485-230-3
1455-42-1
1052
no
no
5 mg/kg
Only to be used as a monomer in the production of polyesters.
The migration of oligomers of less than 1 000 Da shall not exceed 50 µg/kg food (expressed as SPG).
view-details
813-638-7
80512-44-3
1061
no
no
Only to be used as a comonomer in the manufacture of polyether ether ketone plastics up to 0,3 % w/w of the final material.
view-details
-
1547-26-8
1063
no
no
Only to be used together with tetrafluoroethylene and/or ethylene co-monomers to manufacture fluorocopolymers for application as polymer processing aid at up to 0,2 % w/w of the food contact material, and when the low-molecular mass fraction below 1 500 Da in the fluorocopolymer does not exceed 30 mg/kg.
view-details
223-054-9
3710-30-3
1034
no
no
0.05 mg/kg
Only to be used as a crosslinking co-monomer in the manufacture of polyolefins for contact with any type of foods for long term storage at room temperature, including when packaged under hot-fill conditions.
view-details
222-852-4
3634-83-1
988
no
no
SML(T) applies to the migration of its hydrolysis product, 1,3- benzenedimethanamine.
To be used only as co-monomer in the manufacture of a middle layer coating on a poly(ethylene terephthalate) polymer film in a multilayer film.
view-details
204-886-1
128-44-9
902
yes
no
The substance shall comply with the specific purity criteria as set out in Commission Regulation (EU) No 231/2012 (OJ L 83, 22.3.2012, p. 1).
view-details
-
23985-75-3
1066
no
no
0.05 mg/kg
Only to be used as a co-monomer in the manufacture of a polyester non-food contact layer in a plastic multilayer material, which is to be used only in contact with foods for which food simulants A, B, C and/or D1 are assigned in Table 2 of Annex III.
The specific migration limit in column 8 refers to the sum of the substance and of its dimers (cyclic and open chain).
view-details
-
-
1016
yes
no
Only to be used up to: (a) 10 % w/w in non-plasticised PVC; (b) 15 % w/w in non-plasticised PLA.
The final material shall be used at room temperature or below.
view-details
-
-
998
yes
no
Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage.
When used together with the substance with FCM No 859 and/or the substance with FCM No 1043, the restriction of 10 % w/w applies to the sum of those substances.
The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.
view-details
-
-
859
yes
no
Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage.
When used together with the substance with FCM No 998 and/or the substance with FCM No 1043, the restriction of 10 % w/w applies to the sum of those substances.
The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.
view-details
-
-
1043
yes
no
Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage.
When used together with the substance with FCM No 859 and/or the substance with FCM No 998, the restriction of 10 % w/w applies to the sum of those substances.
The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.
view-details
215-251-3
1314-98-3
403
96320
yes
no
view-details
215-222-5
1314-13-2
402
96240
yes
no
view-details
243-814-3
20427-58-1
628
96190
yes
no
view-details
234-394-2
11138-66-2
596
95935
yes
no
view-details
-
-
96
95920
yes
no
view-details
237-772-5
13983-17-0
613
95905
yes
no
view-details
-
-
95
95883
yes
no
Average molecular weight not less than 480 Da.
Viscosity at 100 °C not less than 8,5 cSt (8,5 × 10-6 m2/s).
Content of mineral hydrocarbons with Carbon number less than 25, not more than 5 % (w/w)
view-details
-
-
94
95859
yes
no
Average molecular weight not less than 500 Da.
Viscosity at 100 °C not less than 11 cSt (11 × 10-6 m2/s).
Content of mineral hydrocarbons with Carbon number less than 25, not more than 5 % (w/w)
view-details
-
-
93
95858
yes
no
0.05 mg/kg
Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.
Average molecular weight not less than 350 Da. Viscosity at 100 °C not less than 2,5 cSt (2,5 × 10-6 m2/s). Content of hydrocarbons with Carbon number less than 25, not more than 40 % (w/w).
view-details
231-791-2
7732-18-5
515
95855
26360
yes
no
In compliance with Directive 98/83/EC [OJ L 330, 5.12.1998, p. 32.].
view-details
406-060-8
110638-71-6
757
95725
yes
no
view-details
217-420-7
1843-03-4
430
95600
yes
yes
5 mg/kg
view-details
481-840-9
160535-46-6
870
95500
yes
no
5 mg/kg
view-details
616-108-1
745070-61-5
784
95420
yes
no
5 mg/kg
view-details
248-597-9
27676-62-6
661
95360
yes
yes
5 mg/kg
view-details
254-996-9
40601-76-1
689
95280
yes
yes
6 mg/kg
view-details
423-560-1
161717-32-4
774
95270
yes
yes
2 mg/kg
SML expressed as sum of phosphite, phosphate and the hydrolysis product = TTBP.
view-details
-
227099-60-7
781
95265
yes
no
0.05 mg/kg
view-details
216-971-0
1709-70-2
428
95200
yes
no
view-details
229-934-9
6846-50-0
497
95020
yes
no
5 mg/kg
Only to be used in single-use gloves.
view-details
927-697-2
28931-67-1
664
95000
yes
no
view-details
-
-
924
94987
yes
no
0.05 mg/kg
Only for use in PET in contact with all types of foods other than fatty, high- alcoholic and dairy products.
view-details
-
-
815
94985
yes
no
5 mg/kg
Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.
view-details
-
-
815
94985
yes
no
Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.
view-details
201-074-9
77-99-6
141
94960
25600
13380
yes
no
6 mg/kg
view-details
204-528-4
122-20-3
292
94560
yes
no
5 mg/kg
view-details
212-757-6
867-13-0
800
94425
yes
no
Only for use in PET.
view-details
253-039-2
36443-68-2
680
94400
yes
no
9 mg/kg
view-details
-
-
266
94320
25510
yes
no
view-details
203-049-8
102-71-6
793
94000
yes
no
0.05 mg/kg
SML expressed as the sum of triethanolamine and the hydrochloride adduct expressed as triethanolamine.
view-details
-
-
92
93970
yes
no
0.05 mg/kg
view-details
201-067-0
77-90-7
138
93760
yes
no
view-details
232-552-5
9000-65-1
545
93680
yes
no
view-details
233-466-0
10191-41-0
110
93520
yes
no
view-details
200-412-2
59-02-9
110
93520
yes
no
view-details
-
-
110
93520
yes
no
view-details
247-117-5
25583-20-4
807
93485
yes
no
No migration of titanium nitride nanoparticles.
Only to be used in polyethelyne terephthalate (PET) bottles up to 20 mg/kg.
In the PET, the agglomerates have a diameter of 100 - 500 nm consisting of primary titanium nitride nanoparticles; primary particles have a diameter of approximately 20 nm.
view-details
234-354-4
11116-16-8
807
93485
yes
no
No migration of titanium nitride nanoparticles.
Only to be used in polyethelyne terephthalate (PET) bottles up to 20 mg/kg.
In the PET, the agglomerates have a diameter of 100 - 500 nm consisting of primary titanium nitride nanoparticles; primary particles have a diameter of approximately 20 nm.
view-details
-
-
873
93460
yes
no
Reaction product of titanium dioxide with up to 2 % w/w surface treatment substance octyltriethoxysilane, processed at high temperatures.
view-details
-
-
805
93450
yes
no
The content of the surface treatment copolymer of the coated titanium dioxide is less than 1 % w/w.
view-details
236-675-5
13463-67-7
610
93440
yes
no
view-details
240-613-2
16545-54-3
894
93360
yes
no
view-details
211-750-5
693-36-7
368
93280
yes
yes
view-details
204-614-1
123-28-4
294
93120
yes
yes
view-details
-
120218-34-0
761
92930
yes
no
6 mg/kg
view-details
255-392-8
41484-35-9
690
92880
yes
yes
2.4 mg/kg
view-details
-
-
178
92800
yes
yes
0.48 mg/kg
view-details
202-525-2
96-69-5
178
92800
yes
yes
0.48 mg/kg
view-details
-
78301-43-6
742
92700
yes
yes
5 mg/kg
view-details
254-037-4
38613-77-3
688
92560
yes
yes
18 mg/kg
view-details
-
203255-81-6
792
92475
yes
yes
5 mg/kg
SML expressed as the sum of phosphite and phosphate form of the substance and the hydrolysis products.
view-details
CHIMASSORB 119; LOWILITE 19
401-990-0
106990-43-6
791
92470
yes
no
0.05 mg/kg
view-details
-
-
269
92350
25090
yes
no
view-details
-
-
91
92320
yes
yes
15 mg/kg
view-details
260-815-4
57569-40-1
696
92205
yes
no
view-details
229-176-9
6422-86-2
798
92200
yes
no
60 mg/kg
view-details
229-176-9
6422-86-2
798
92200
yes
no
view-details
-
-
90
92195
yes
no
view-details
201-766-0
87-69-4
161
92160
yes
no
view-details
-
-
161
92160
yes
no
view-details
Gallic acid derivatives found in nutgalls, bark and other plant parts, especially oak bark.
215-753-2
1401-55-4
419
92150
yes
no
According to the JECFA specifications.
view-details
-
-
419
92150
yes
no
According to the JECFA specifications.
view-details
238-877-9
14807-96-6
615
92080
yes
no
view-details
231-639-5
7664-93-9
511
91920
yes
no
view-details
-
-
511
91920
yes
no
view-details
231-722-6
7704-34-9
514
91840
yes
no
view-details
-
-
814
91815
yes
no
2 mg/kg
view-details
-
-
813
91530
yes
no
5 mg/kg
view-details
204-772-1
126-14-7
309
91360
yes
no
view-details
204-771-6
126-13-6
308
91200
yes
no
view-details
203-740-4
110-15-6
247
90960
24820
yes
no
view-details
-
-
821
90810
yes
no
view-details
261-257-4
58446-52-9
699
90720
yes
no
view-details
-
-
89
89440
yes
no
view-details
204-666-5
123-95-5
301
89120
yes
no
view-details
-
-
106
89040
24550
yes
no
view-details
204-693-2
124-26-5
306
88960
yes
no
view-details
686-629-7
68412-29-3
723
88880
yes
no
view-details
High-polymeric carbohydrate material usually derived from cereal grains such as corn, wheat and sorghum, and from roots and tubers such as potatoes and tapioca. Includes starch which has been pregelatinized by heating in the presence of water.
232-679-6
9005-25-8
564
88800
24540
yes
no
view-details
232-391-0
8013-07-8
532
88640
yes
no
60 mg/kg
view-details
232-391-0
8013-07-8
532
88640
yes
no
view-details
232-391-0
8013-07-8
532
88640
yes
no
30 mg/kg
In the case of PVC gaskets used to seal glass jars containing infant formulae and follow-on formulae as defined by Directive 2006/141/EC or processed cereal-based foods and baby foods for infants and young children as defined by Directive 2006/125/EC, the SML is lowered to 30 mg/kg.Oxirane < 8 %, iodine number < 6.
view-details
248-027-9
26836-47-5
654
88600
yes
no
view-details
200-061-5
50-70-4
100
88320
24490
yes
no
view-details
-
-
100
88320
24490
yes
no
view-details
247-891-4
26658-19-5
651
88240
yes
no
view-details
258-994-9
54140-20-4
693
88160
yes
no
view-details
247-569-3
26266-58-0
644
88080
yes
no
view-details
262-958-8
61752-68-9
702
87920
yes
no
view-details
215-664-9
1338-41-6
415
87840
yes
no
view-details
247-568-8
26266-57-9
643
87760
yes
no
view-details
215-665-4
1338-43-8
416
87680
yes
no
view-details
215-663-3
1338-39-2
414
87600
yes
no
view-details
263-600-3
62568-11-0
709
87520
yes
no
view-details
249-448-0
29116-98-1
666
87280
yes
no
view-details
203-768-7
110-44-1
252
87200
yes
no
view-details
-
-
252
87200
yes
no
view-details
231-867-5
7772-98-7
519
87120
yes
no
view-details
215-540-4
1330-43-4
407
87040
yes
no
view-details
231-821-4
7757-83-7
516
86960
yes
no
view-details
231-555-9
7632-00-0
506
86920
yes
no
0.6 mg/kg
view-details
-
-
88
86880
yes
no
9 mg/kg
view-details
231-679-3
7681-82-5
513
86800
yes
no
view-details
215-185-5
1310-73-2
400
86720
yes
no
view-details
231-599-9
7647-15-6
508
86560
yes
no
view-details
231-548-0
7631-90-5
505
86480
yes
no
view-details
-
-
87
86285
yes
no
For synthetic amorphous silicon dioxide, silanated: primary particles of 1-100 nm which are aggregated to a size of 0,1-1 µm and may form agglomerates within the size distribution of 0,3 µm to the mm size.
view-details
231-545-4
7631-86-9
504
86240
yes
no
For synthetic amorphous silicon dioxide: primary particles of 1 - 100 nm which are aggregated to a size of 0,1 - 1 µm which may form agglomerates within the size distribution of 0,3 µm to the mm size.
view-details
206-991-8
409-21-2
339
86160
yes
no
view-details
-
-
86
86000
yes
no
view-details
-
37296-97-2
685
85950
yes
no
0.15 mg/kg
SML expressed as fluoride.
Only to be used in layers of multi-layer materials not coming into direct contact with food.
view-details
215-683-2
1343-98-2
417
85680
yes
no
view-details
-
-
417
85680
yes
no
view-details
-
-
85
85610
yes
no
view-details
-
-
84
85601
yes
no
view-details
203-672-5
109-43-3
242
85360
yes
no
view-details
204-317-7
119-36-8
284
84880
yes
no
30 mg/kg
view-details
201-728-3
87-18-3
160
84800
yes
yes
12 mg/kg
view-details
200-712-3
69-72-7
121
84640
24270
yes
no
view-details
264-848-5
64365-17-9
714
84400
yes
no
view-details
232-476-2
8050-15-5
536
84320
yes
no
view-details
266-042-9
65997-13-9
718
84240
yes
no
view-details
266-041-3
65997-06-0
717
84210
yes
no
view-details
232-479-9
8050-26-8
537
84080
yes
no
view-details
232-482-5
8050-31-5
538
84000
yes
no
view-details
205-470-2
141-22-0
324
83700
yes
yes
42 mg/kg
view-details
-
-
324
83700
yes
yes
42 mg/kg
view-details
277-299-1
73138-82-6
741
83610
24070
yes
no
view-details
270-476-4
68442-12-6
726
83599
yes
yes
view-details
432-130-2
119345-01-6
760
83595
yes
no
18 mg/kg
Composition: 4,4'-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No 0038613-77-3) (36-46 % w/w (*)),4,3'-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No 0118421-00-4) (17-23 % w/w (*)),3,3'-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No 0118421-01-5) (1-5 % w/w (*)),4-biphenylene-0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS No 0091362-37-7) (11-19 % w/w (*)),tris(2,4-di-tert-butylphenyl)phosphite (CAS No 0031570-04-4) (9-18 % w/w (*)),4,4'-biphenylene-0,0-bis(2,4-di-tert-butylphenyl)phosphonate-0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS No 0112949-97-0) (< 5 % w/w (*))(*)Quantity of substance used/quantity of formulationOther specifications: Phosphor content of min. 5,4 % to max. 5,9 %,Acid value of max. 10 mg KOH per gram,Melt range of 85- 110 °C.
view-details
238-878-4
14808-60-7
616
83470
yes
no
view-details
602-803-7
12269-78-2
603
83460
yes
no
view-details
-
13445-56-2
609
83455
yes
no
view-details
-
-
609
83455
yes
no
view-details
219-574-0
2466-09-3
445
83440
yes
no
view-details
-
-
445
83440
yes
no
view-details
-
-
83
83330
yes
no
view-details
-
-
82
83325
yes
no
view-details
-
-
81
83320
yes
no
view-details
215-354-3
1323-39-3
406
83300
yes
no
view-details
249-369-1
29013-28-3
665
83120
yes
no
view-details
215-549-3
1330-80-9
408
82960
yes
no
view-details
248-315-4
27194-74-7
659
82800
yes
no
view-details
228-229-3
6182-11-2
491
82720
yes
no
view-details
251-581-4
33587-20-1
677
82560
yes
no
view-details
203-315-3
105-62-4
213
82400
yes
no
view-details
245-217-3
22788-19-8
630
82240
yes
no
view-details
618-414-0
9005-37-2
567
82080
yes
no
view-details
201-176-3
79-09-4
146
82000
23890
yes
no
view-details
200-661-7
67-63-0
118
81882
23830
yes
no
view-details
-
-
109
81840
23740
yes
no
view-details
-
-
80
81760
yes
no
view-details
231-659-4
7681-11-0
512
81680
yes
no
view-details
215-181-3
1310-58-3
399
81600
yes
no
view-details
231-830-3
7758-02-3
517
81520
yes
no
view-details
700-107-9
87189-25-1
751
81515
yes
no
view-details
618-363-4
9003-39-8
552
81500
yes
no
The substance shall meet the purity criteria as laid down in Commission Directive 2008/84/EC [OJ L 253, 20.9.2008, p. 1.].
view-details
606-265-4
192268-64-7
780
81220
yes
no
5 mg/kg
view-details
615-678-9
71878-19-8
740
81200
yes
yes
3 mg/kg
view-details
618-352-4
9003-07-0
550
81060
yes
no
view-details
232-417-0
8017-16-1
534
80720
yes
no
view-details

export-type