plastic-material-food-contact
plastic-material-food-contact
FCM and Articles Regulation, Annex I - Authorised Substances
EU. Union List of Authorized Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation (EU) 2023/1627, OJ L 201, 11 August 2023
This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.
Last updated 23 April 2024. Database contains 1080 unique substances/entries.
Filter the list
|
-
|
-
|
357 |
13932 |
no |
no |
0.01 mg/kg |
Only to be used as a co-monomer for the preparation of polymeric additive. |
Details | |
|
-
|
23985-75-3
|
1066 |
no |
no |
0.05 mg/kg |
Only to be used as a co-monomer in the manufacture of a polyester non-food contact layer in a plastic multilayer material, which is to be used only in contact with foods for which food simulants A, B, C and/or D1 are assigned in Table 2 of Annex III. The specific migration limit in column 8 refers to the sum of the substance and of its dimers (cyclic and open chain). |
Details | ||
|
243-053-7
|
19430-93-4
|
973 |
22931 |
no |
no |
Only to be used as a co-monomer up to 0,1 % w/w in the polymerisation of fluoropolymers, sintered at high temperatures. |
Details | ||
|
219-547-3
|
2459-10-1
|
971 |
25885 |
no |
no |
Only to be used as a co-monomer up to 0,35 % w/w to produce modified polyesters intended to be used in contact with aqueous and dry foodstuffs containing no free fat at the surface. |
Details | ||
|
813-638-7
|
80512-44-3
|
1061 |
no |
no |
Only to be used as a comonomer in the manufacture of polyether ether ketone plastics up to 0,3 % w/w of the final material. |
Details | |||
|
219-784-2
|
2530-83-8
|
1068 |
no |
no |
Only to be used as a component of a sizing agent to treat glass fibres to be embedded in glass-fibre-reinforced low diffusivity plastics (polyethylene terephthalate (PET), polycarbonate (PC), polybutylene terephthalate (PBT), thermoset polyesters and epoxy bisphenol vinylester) in contact with all foodstuffs. In treated glass fibres, residues of the substance must not be detectable at 0,01 mg/kg for the substance and 0,06 mg/kg for each of the reaction products (hydrolysed monomers and epoxy-containing cyclic dimer, trimer and tetramer). |
Details | |||
|
223-054-9
|
3710-30-3
|
1034 |
no |
no |
0.05 mg/kg |
Only to be used as a crosslinking co-monomer in the manufacture of polyolefins for contact with any type of foods for long term storage at room temperature, including when packaged under hot-fill conditions. |
Details | ||
|
604-479-2
|
1455-42-1
|
1052 |
no |
no |
5 mg/kg |
Only to be used as a monomer in the production of polyesters. The migration of oligomers of less than 1 000 Da shall not exceed 50 µg/kg food (expressed as SPG). |
Details | ||
|
-
|
-
|
1031 |
no |
no |
5 mg/kg |
Only to be used as a monomer in the production of polyethylene furanoate. The migration of the oligomeric fraction of less than 1 000 Da shall not exceed 50 µg/kg food (expressed as furan-2,5-dicarboxylic acid). |
Details | ||
|
221-800-8
|
3238-40-2
|
1031 |
no |
no |
5 mg/kg |
Only to be used as a monomer in the production of polyethylene furanoate. The migration of the oligomeric fraction of less than 1 000 Da shall not exceed 50 µg/kg food (expressed as furan-2,5-dicarboxylic acid). |
Details | ||