plastic-material-food-contact

FCM and Articles Regulation, Annex I - Authorised Substances

EU. Union List of Authorised Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation 2020/1245/EU, 3 September 2020

This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.

Last updated 05 July 2022. Database contains 1072 unique substances/entries.
Filter the list

 
-
-
1030
yes
no
0.05 mg/kg
Only to be used up to 12 % (w/w) in polyolefins in contact with dry foods to which simulant E is assigned in table 2 of Annex III at room temperature or below.
The sum of the specific migration of 1-chlorohexadecane and 1-chlorooctadecane shall not exceed 0,05 mg/kg food.
Can contain platelets in the nanoform that are only in one dimension thinner than 100 nm. Such platelets shall be oriented parallel to the polymer surface and shall be fully embedded in the polymer.
Details
-
-
1075
yes
no
Only to be used as additive at up to 4.0 % w/w in polylactic acid plastics intended for long-term storage of water at ambient temperature or below. Can form platelets in the nanoform that are in one or two dimensions thinner than 100 nm. Such platelets shall be oriented parallel to the polymer surface and shall be fully embedded in the polymer.
Details
-
-
19
39090
yes
no
Details
-
-
20
39120
yes
no
SML(T) expressed excluding HCl.
Details
-
-
14
33801
yes
no
30 mg/kg
Details
-
-
810
68119
yes
no
Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.
Details
-
-
810
68119
yes
no
5 mg/kg
Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.
Details
-
-
822
71938
yes
no
0.002 mg/kg
Details
-
-
97
72081/10
yes
no
Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermalpolymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing.
Properties: Viscosity at 120 °C: > 3 Pa.s,Softening point: > 95 °C as determined by ASTM Method E 28-67,Bromine number: < 40 (ASTM D1159),The colour of a 50 % solution in toluene < 11 on the Gardner scale,Residual aromatic monomer ≤ 50 ppm.
Details
-
-
68
73160
yes
yes
0.05 mg/kg
Details

Export search results to: