plastic-material-food-contact

FCM and Articles Regulation, Annex I - Authorised Substances

EU. Union List of Authorised Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation 2020/1245/EU, 3 September 2020

This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.

Last updated 10 August 2022. Database contains 1072 unique substances/entries.
Filter the list

 
843-672-8
1227937-46-3
1076
yes
no
0.05 mg/kg
Only to be used as an additive at up to 0.2 % w/w in high impact polystyrene materials and articles intended contact with food at room temperature and below, including hot-fill and/or heating up to 100 ° C for up to 2 hours. It shall not be used in contact with foods for which simulant C and/or D1 is assigned in Annex III.
Details
204-552-5
122-52-1
293
23175
no
no
0.01 mg/kg
1 mg/kg in final product.
Details
204-118-5
115-96-8
280
73720
yes
no
0.01 mg/kg
Details
231-633-2
7664-38-2
509
23170
72640
yes
no
Details
203-632-7
108-95-2
241
22960
no
no
3 mg/kg
Details
-
-
97
72081/10
yes
no
Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermalpolymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing.
Properties: Viscosity at 120 °C: > 3 Pa.s,Softening point: > 95 °C as determined by ASTM Method E 28-67,Bromine number: < 40 (ASTM D1159),The colour of a 50 % solution in toluene < 11 on the Gardner scale,Residual aromatic monomer ≤ 50 ppm.
Details
682-238-0
1190931-27-1
1045
yes
no
Only to be used as a polymer production aid during the manufacture of fluoropolymers under high temperature conditions of at least 370 °C.
Details
216-600-2
1623-05-8
423
22937
no
no
0.05 mg/kg
Details
223-320-4
3825-26-1
468
71960
yes
no
Only to be used in repeated use articles, sintered at high temperatures.
Details
214-703-7
1187-93-5
391
22932
no
no
0.05 mg/kg
Only to be used in: anti-stick coatings; fluoro- and perfluoropolymers intended for repeated use applications where the contact ratio is 1 dm2 surface in contact with at least 150 kg food.
Details

Export search results to: