plastic-material-food-contact

plastic-material-food-contact

FCM and Articles Regulation, Annex I - Authorised Substances

EU. Union List of Authorized Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation (EU) 2023/1627, OJ L 201, 11 August 2023

This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.

Last updated 23 April 2024. Database contains 1080 unique substances/entries.

Filter the list

Showing 1 - 200 of 1,080 results.

Substance Name	EC No.	CAS No.	FCM No	Ref No.	Additive or PPA	FRF applicable	SML (mg/kg)	Restriction(s)
(1,3-phenylenedioxy)diacetic acid	203-027-8	102-39-6	202	23070	no	no	0.05 mg/kg		Details
(1,3:2,4) diparamethyldibenylidene sorbitol	617-241-8	81541-12-0	752	39890	yes	no			Details
(butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer crosslinked with 1,3-butanediol dimethacrylate	-	-	1043		yes	no		Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage. When used together with the substance with FCM No 859 and/or the substance with FCM No 998, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.	Details
(butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer crosslinked with divinylbenzene	-	-	859		yes	no		Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage. When used together with the substance with FCM No 998 and/or the substance with FCM No 1043, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.	Details
(butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer not cross-linked	-	-	998		yes	no		Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage. When used together with the substance with FCM No 859 and/or the substance with FCM No 1043, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.	Details
(butadiene, styrene, methyl methacrylate) copolymer cross-linked with 1,3-butanediol dimethacrylate	-	-	855	40560	yes	no		Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 12 % at room temperature or below.	Details
(butyl acrylate, methyl methacrylate) copolymer, cross-linked with allyl methacrylate	-	-	866	40620	yes	no		Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 7 %.	Details
(butyl acrylate, methyl methacrylate, butyl methacrylate) copolymer	607-698-1	25322-99-0	865	40619	yes	no		Only to be used in: (a) rigid poly(vinyl chloride) (PVC) at a maximum level of 1 % w/w. (b) polylactic acid (PLA) at a maximum level of 5 % w/w.	Details
(butyl acrylate, methyl methacrylate, styrene) copolymer	608-050-0	27136-15-8	869	66763	yes	no		Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 3 %.	Details
(butyl methacrylate, ethyl acrylate, methyl methacrylate) copolymer	-	40471-03-2	867	40815	yes	no		Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 2 %.	Details
(ethyl acrylate, methyl methacrylate) copolymer	618-459-6	9010-88-2	868	53245	yes	no		Only to be used in: (a) rigid poly(vinyl chloride) (PVC) at a maximum level of 2 % w/w. (b) polylactic acid (PLA) at a maximum level of 5 % w/w. (c) polyethylene terephthalate (PET) at a maximum level of 5 % w/w.	Details
(methacrylic acid, ethyl acrylate, n-butyl acrylate, methyl methacrylate and butadiene) copolymer	-	-	1016		yes	no		Only to be used up to: (a) 10 % w/w in non-plasticised PVC; (b) 15 % w/w in non-plasticised PLA. The final material shall be used at room temperature or below.	Details
(methyl methacrylate, butyl acrylate, styrene, glycidyl methacrylate) copolymer	-	37953-21-2	857	66765	yes	no		Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 2 % at room temperature or below.	Details
(perfluorobutyl)ethylene	243-053-7	19430-93-4	973	22931	no	no		Only to be used as a co-monomer up to 0,1 % w/w in the polymerisation of fluoropolymers, sintered at high temperatures.	Details
(polyethylene terephthalate, hydroxylated polybutadiene, pyromellitic anhydride) copolymer	-	-	979	79987	yes	no		Only to be used in polyethylene terephthalate (PET) at a maximum level of 5 % w/w.	Details
(triethanolamine-perchlorate, sodium salt) dimer	480-340-8	156157-97-0	1080		yes	no		Only to be used in rigid poly (vinyl chloride) in contact with foods included in the food category with reference number 01.01.A in table 2 of Annex III.	Details
(triethanolamine-perchlorate, sodium salt) dimer	480-340-8	156157-97-0	1080		yes	no		Only to be used in rigid poly (vinyl chloride) in contact with foods included in the food category with reference number 01.01.A in table 2 of Annex III.	Details
1,1,1-trimethylolpropane	201-074-9	77-99-6	141	94960 25600 13380	yes	no	6 mg/kg		Details
1,1,1-trimethylolpropane trimethacrylate	221-950-4	3290-92-4	463	25840	no	no	0.05 mg/kg		Details
1,1,1-tris(4-hydroxyphenol)ethane THPE; TRIS(P-HYDROXYPHENYL)ETHANE; TRIS(PARA-HYDROXYPHENYL)ETHANE	405-800-7	27955-94-8	662	25927	no	no	0.005 mg/kg	Only to be used in polycarbonates.	Details
1,1-difluoroethane	200-866-1	75-37-6	131	48460	yes	no			Details
1,10-decanediamine	211-471-9	646-25-3	863	15260	no	no	0.05 mg/kg	Only to be used as a co-monomer for manufacturing polyamide articles for repeated use in contact with aqueous, acidic and dairy foodstuffs at room temperature or for short term contact up to 150 °C.	Details
1,2,3,4-tetrahydronaphthalene-2,6-dicarboxylic acid, dimethyl ester	-	23985-75-3	1066		no	no	0.05 mg/kg	Only to be used as a co-monomer in the manufacture of a polyester non-food contact layer in a plastic multilayer material, which is to be used only in contact with foods for which food simulants A, B, C and/or D1 are assigned in Table 2 of Annex III. The specific migration limit in column 8 refers to the sum of the substance and of its dimers (cyclic and open chain).	Details
1,2-benzenedicarboxylic acid, di-C8-10-branched alkyl esters, C9-rich	271-090-9	68515-48-0	728	75100	yes	no		Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae;(c)technical support agent in concentrations up to 0,1 % in the final product. Not to be used in combination with FCM substances 157, 159, 283, or 1085.	Details
1,2-benzenedicarboxylic acid, di-C8-10-branched alkyl esters, C9-rich	271-090-9	68515-48-0	728	75100	yes	no		Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae;(c)technical support agent in concentrations up to 0,1 % in the final product. Not to be used in combination with FCM substances 157, 159, 283, or 1085.	Details
1,2-Benzenedicarboxylic acid, di-C9-11-branched alkyl esters, C10-rich	271-091-4	68515-49-1	729	75105	yes	no		Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae as defined by Directive 2006/141/EC or processed cereal-based foods and baby foods for infants and young children as defined by Directive 2006/125/EC;(c)technical support agent in concentrations up to 0,1 % in the final product.	Details
1,2-Benzenedicarboxylic acid, di-C9-11-branched alkyl esters, C10-rich	271-091-4	68515-49-1	729	75105	yes	no		Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae as defined by Directive 2006/141/EC or processed cereal-based foods and baby foods for infants and young children as defined by Directive 2006/125/EC;(c)technical support agent in concentrations up to 0,1 % in the final product.	Details
1,2-benziso-thiazol-3(2H)-one 1,1-dioxide, sodium salt	204-886-1	128-44-9	902		yes	no		The substance shall comply with the specific purity criteria as set out in Commission Regulation (EU) No 231/2012 (OJ L 83, 22.3.2012, p. 1).	Details
1,2-bis(3-aminopropyl)ethylenediamine, polymer with N-butyl-2,2,6,6-tetramethyl-4-piperidinamine and 2,4,6-trichloro-1,3,5-triazine	500-311-6	136504-96-6	767	38510	yes	no	5 mg/kg		Details
1,2-cyclohexanedicarboxylic acid, diisononyl ester	431-890-2	166412-78-8	775	45705	yes	no			Details
1,2-dihydroxybenzene	204-427-5	120-80-9	289	24051 15880	no	no	6 mg/kg		Details
1,2-propanediol	200-338-0	57-55-6	109	23740 81840	yes	no			Details
1,2-propyleneglycol alginate	618-414-0	9005-37-2	567	82080	yes	no			Details
1,2-propyleneglycol dilaurate	245-217-3	22788-19-8	630	82240	yes	no			Details
1,2-propyleneglycol dioleate	203-315-3	105-62-4	213	82400	yes	no			Details
1,2-propyleneglycol dipalmitate	251-581-4	33587-20-1	677	82560	yes	no			Details
1,2-propyleneglycol distearate	228-229-3	6182-11-2	491	82720	yes	no			Details
1,2-propyleneglycol monolaurate	248-315-4	27194-74-7	659	82800	yes	no			Details
1,2-propyleneglycol monooleate	215-549-3	1330-80-9	408	82960	yes	no			Details
1,2-propyleneglycol monopalmitate	249-369-1	29013-28-3	665	83120	yes	no			Details
1,2-propyleneglycol monostearate	215-354-3	1323-39-3	406	83300	yes	no			Details
1,3,5-benzenetricarboxylic acid trichloride	224-594-8	4422-95-1	481	13060	no	no	0.05 mg/kg	SML expressed as 1,3,5-benzenetricarboxylic acid.	Details
1,3,5-trimethyl-2,4,6-tris(3,5-di-tert-butyl-4-hydroxybenzyl)benzene	216-971-0	1709-70-2	428	95200	yes	no			Details
1,3,5-tris (2,2-dimethylpropanamido)benzene	456-830-2	745070-61-5	784	95420	yes	no	5 mg/kg		Details
1,3,5-tris(4-benzoylphenyl) benzene	-	227099-60-7	781	95265	yes	no	0.05 mg/kg		Details
1,3-benzenedimethanamine	216-032-5	1477-55-0	421	13000	no	no			Details
1,3-bis(2-hydroxyethoxy)benzene	203-028-3	102-40-9	203	13323	no	no	0.05 mg/kg		Details
1,3-bis(isocyanatomethyl)benzene	222-852-4	3634-83-1	988		no	no		SML(T) applies to the migration of its hydrolysis product, 1,3- benzenedimethanamine. To be used only as co-monomer in the manufacture of a middle layer coating on a poly(ethylene terephthalate) polymer film in a multilayer film.	Details
1,3-butanediol	203-529-7	107-88-0	228	13690	no	no			Details
1,3-dihydroxybenzene	203-585-2	108-46-3	237	24072 15910	no	no	2.4 mg/kg		Details
1,3-dioxolane	211-463-5	646-06-0	363	16450	no	no	5 mg/kg		Details
1,3-phenylenediamine	203-584-7	108-45-2	236	23050	no	no	0.01 mg/kg		Details
1,3-propanediol	207-997-3	504-63-2	343	23770	no	no	0.05 mg/kg		Details
1,4-bis(hydroxymethyl)cyclohexane	203-268-9	105-08-8	210	13390 14880	no	no			Details
1,4-butanediol	203-786-5	110-63-4	254	40580 13720	yes	no			Details
1,4-butanediol bis(2,3-epoxypropyl)ether	219-371-7	2425-79-8	442	13780	no	no	0.01 mg/kg	Residual content = 1 mg/kg in final product expressed as epoxygroup. Molecular weight is 43 Da.	Details
1,4-butanediol formal	208-015-6	505-65-7	344	21821 13810	no	no			Details
1,4-butanediol formal	208-015-6	505-65-7	344	21821 13810	no	no	0.05 mg/kg		Details
1,4-butanediol formal	208-015-6	505-65-7	344	21821 13810	no	no			Details
1,4-cyclohexanedicarboxylic acid	214-068-6	1076-97-7	806	14876	no	no	5 mg/kg	Only to be used for manufacture of polyesters.	Details
1,4-diaminobutane	203-782-3	110-60-1	253	15250	no	no			Details
1,4-dichlorobenzene	203-400-5	106-46-7	217	15565	no	no	12 mg/kg		Details
1,4-dihydroxybenzene	204-617-8	123-31-9	295	48620 15940 18867	yes	no	0.6 mg/kg		Details
1,4:3,6-dianhydrosorbitol	211-492-3	652-67-5	364	15404	no	no	5 mg/kg	Only to be used as: (a) a co-monomer in poly (ethylene-co-isosorbide terephthalate); (b) a co-monomer at levels of up to 40 mole % of the diol component in combination with ethylene glycol and/or 1,4-bis(hydroxymethyl)cyclohexane, for the production of polyesters. Polyesters made using dianhydrosorbitol together with 1,4-bis(hydroxymethyl)cyclohexane shall not be used in contact with foods containing more than 15 % alcohol.	Details
1,5-naphthalene diisocyanate	221-641-4	3173-72-6	461	22420	no	no		1 mg/kg in final product expressed as isocyanate moiety.	Details
1,6-hexanediamine, N1,N6-bis(2,2,6,6-tetramethyl-4-piperidinyl)-, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine	617-335-9	82451-48-7	790	80480	yes	no	5 mg/kg	Average molecular weight not less than 2400 Da. Residual content of morpholine ≤ 30 mg/kg, of N,N'-bis(2,2,6,6-tetramethylpiperidin-4-yl)hexane-1,6-diamine < 15000 mg/kg, and of 2,4-dichloro-6-morpholino-1,3,5-triazine ≤ 20 mg/kg.	Details
1,6-hexanediol	211-074-0	629-11-8	361	18700	no	no	0.05 mg/kg		Details
1,7-octadiene	223-054-9	3710-30-3	1034		no	no	0.05 mg/kg	Only to be used as a crosslinking co-monomer in the manufacture of polyolefins for contact with any type of foods for long term storage at room temperature, including when packaged under hot-fill conditions.	Details
1,9-decadiene	216-711-6	1647-16-1	424	15070	no	no	0.05 mg/kg		Details
1-(2-hydroxyethyl)-4-hydroxy-2,2,6,6-tetramethyl piperidine-succinic acid, dimethyl ester, copolymer	613-797-0	65447-77-0	716	60800	yes	no	30 mg/kg		Details
1-(3-chloroallyl)-3,5,7-triaza-1-azoniaadamantane chloride	223-805-0	4080-31-3	474	43600	yes	no	0.3 mg/kg		Details
1-amino-3-aminomethyl-3,5,5-trimethylcyclohexane	220-666-8	2855-13-2	454	12670	no	no	6 mg/kg		Details
1-butanol	200-751-6	71-36-3	123	13840	no	no			Details
1-butene	203-449-2	106-98-9	222	13870	no	no			Details
1-decanol	203-956-9	112-30-1	267	15100	no	no			Details
1-decene	212-819-2	872-05-9	375	15130	no	no	0.05 mg/kg		Details
1-dodecene	203-968-4	112-41-4	268	16704	no	no	0.05 mg/kg		Details
1-hexadecanol	253-149-0	36653-82-4	681	18310	no	no			Details
1-hexene	209-753-1	592-41-6	356	18820	no	no	3 mg/kg		Details
1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane	223-861-6	4098-71-9	475	19110	no	no		1 mg/kg in final product expressed as isocyanate moiety.	Details
1-nonanol	205-583-7	143-08-8	331	22480	no	no			Details
1-octanol	203-917-6	111-87-5	265	22600	no	no			Details
1-octene	203-893-7	111-66-0	264	22660	no	no	15 mg/kg		Details
1-pentanol	200-752-1	71-41-0	124	22870	no	no			Details
1-pentene	203-694-5	109-67-1	245	22900	no	no	5 mg/kg		Details
1-propanol	200-746-9	71-23-8	122	23800	no	no			Details
1-tetradecene	214-306-9	1120-36-1	388	25080	no	no	0.05 mg/kg		Details
1-vinylimidazole	214-012-0	1072-63-5	387	26155	no	no	0.05 mg/kg		Details
11-aminoundecanoic acid	219-417-6	2432-99-7	443	12788	no	no	5 mg/kg		Details
12-aminododecanoic acid	211-754-7	693-57-2	369	12761	no	no	0.05 mg/kg		Details
12-hydroxystearic acid	203-366-1	106-14-9	214	61840	yes	no			Details
2,2'-methylenebis(4,6-di-tert-butylphenyl) lithium phosphate	617-688-9	85209-93-4	750	66350	yes	no	5 mg/kg		Details
2,2'-oxamidobis[ethyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate]	274-572-7	70331-94-1	739	70000	yes	no			Details
2,2,4,4-tetramethylcyclobutane-1,3-diol	221-140-0	3010-96-6	881	25187	no	no	5 mg/kg	Only for: (a) repeated use articles for long term storage at room temperature or below and hotfill; (b) single use materials and articles as a co-monomer at a maximum use level of 35 mole % of the diol component of polyesters, and if such materials and articles are for long term storage at room temperature or below of food types which have an alcohol content of up to 10 % and for which Table 2 of Annex III does not assign simulant D2. Hot fill conditions are allowed for such single use materials and articles.	Details
2,2,4-trimethyl-1,3-pentanediol diisobutyrate	229-934-9	6846-50-0	497	95020	yes	no	5 mg/kg	Only to be used in single-use gloves.	Details
2,2-bis(4-hydroxyphenyl)propane	201-245-8	80-05-7	151	13480 13607	no	no	0.05 mg/kg	Not to be used for the manufacture of polycarbonate infant [Infant as defined in Article 2(2)(a) of Regulation (EU) No 609/2013] feeding bottles [This restriction is applicable from 1 May 2011 as regards the manufacture and from 1 June 2011 as regards the placing on the market and importation into the Union]. Not to be used for the manufacture of polycarbonate drinking cups or bottles which, due to their spill proof characteristics, are intended for infants [Infant as defined in Article 2(2)(a) of Regulation (EU) No 609/2013] and young children [Young children as defined in Article 2(2)(b) of Regulation (EU) No 609/2013].	Details
2,2-bis(4-hydroxyphenyl)propane bis(2,3-epoxypropyl) ether	216-823-5	1675-54-3	426	13610 13510	no	no		In compliance with Commission Regulation (EC) No 1895/2005 [OJ L 302, 19.11.2005, p. 28].	Details
2,2-bis(4-hydroxyphenyl)propane bis(phthalic anhydride)	253-781-7	38103-06-9	687	13614 13530	no	no	0.05 mg/kg		Details
2,2-bis(hydroxymethyl)propionic acid	225-306-3	4767-03-7	484	13395	no	no	0.05 mg/kg		Details
2,2-dimethyl-1,3-propanediol	204-781-0	126-30-7	310	16390 22437	no	no	0.05 mg/kg		Details
2,3,3,4,4,5,5-heptafluoro-1-pentene	-	1547-26-8	1063		no	no		Only to be used together with tetrafluoroethylene and/or ethylene co-monomers to manufacture fluorocopolymers for application as polymer processing aid at up to 0,2 % w/w of the food contact material, and when the low-molecular mass fraction below 1 500 Da in the fluorocopolymer does not exceed 30 mg/kg.	Details
2,3,6-trimethylphenol	219-330-3	2416-94-6	882	25872	no	no	0.05 mg/kg		Details
2,4,4'-trifluorobenzophenone	813-638-7	80512-44-3	1061		no	no		Only to be used as a comonomer in the manufacture of polyether ether ketone plastics up to 0,3 % w/w of the final material.	Details
2,4,6-triamino-1,3,5-triazine	203-615-4	108-78-1	239	25420 19975 93720	yes	no	2.5 mg/kg		Details
2,4,8,10-tetraoxaspiro[5,5]undecane-3,9-diethanol,β3,β3,β9,β9-tetramethyl-(''SPG'')	604-479-2	1455-42-1	1052		no	no	5 mg/kg	Only to be used as a monomer in the production of polyesters. The migration of oligomers of less than 1 000 Da shall not exceed 50 µg/kg food (expressed as SPG).	Details
2,4-bis(2,4-dimethylphenyl)-6-(2-hydroxy-4-n-octyloxyphenyl)-1,3,5-triazine	412-440-4	2725-22-6	452	38885	yes	no	5 mg/kg		Details
2,4-diamino-6-hydroxypyrimidine	200-254-4	56-06-4	864	46330	yes	no	5 mg/kg	Only to be used in rigid poly(vinyl chloride) (PVC) in contact with non-acidic and non-alcoholic aqueous food.	Details
2,4-diamino-6-phenyl-1,3,5-triazine	202-095-6	91-76-9	168	13075 15310	no	no	5 mg/kg		Details
2,4-dihydroxybenzophenone	205-029-4	131-56-6	318	48640	yes	no			Details
2,4-toluene diisocyanate	209-544-5	584-84-9	354	25210	no	no		1 mg/kg in final product expressed as isocyanate moiety.	Details
2,4-toluene diisocyanate dimer	247-953-0	26747-90-0	653	25270	no	no		1 mg/kg in final product expressed as isocyanate moiety.	Details
2,6-di-tert-butyl-p-cresol	204-881-4	128-37-0	315	46640	yes	no	3 mg/kg		Details
2,6-dimethylphenol	209-400-1	576-26-1	352	16360	no	no	0.05 mg/kg		Details
2,6-naphthalenedicarboxylic acid	214-527-0	1141-38-4	389	22360	no	no	5 mg/kg		Details
2,6-naphthalenedicarboxylic acid, dimethyl ester	212-661-4	840-65-3	373	22390	no	no	0.05 mg/kg		Details
2,6-toluene diisocyanate	202-039-0	91-08-7	167	25240	no	no		1 mg/kg in final product expressed as isocyanate moiety.	Details
2-(2'-hydroxy-5'-methylphenyl)benzotriazole	219-470-5	2440-22-4	444	61440	yes	no			Details
2-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-(hexyloxy)phenol CG 30-1577	411-380-6	147315-50-2	770	51700	yes	no	0.05 mg/kg		Details
2-acrylamido-2-methylpropanesulphonic acid	239-268-0	15214-89-8	617	10660	no	no	0.05 mg/kg		Details
2-aminobenzamide	201-851-2	88-68-6	164	34895	yes	no	0.05 mg/kg	Only for use in PET for water and beverages.	Details
2-aminoethanol	205-483-3	141-43-5	326	35170 12763	yes	no	0.05 mg/kg	Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down. For indirect food contact only, behind a PET layer.	Details
2-butene	203-452-9	107-01-7	224	13900	no	no			Details
2-cyano-3,3-diphenylacrylic acid, 2-ethylhexyl ester	228-250-8	6197-30-4	492	45650	yes	no	0.05 mg/kg		Details
2-cyano-3,3-diphenylacrylic acid, ethyl ester	226-029-0	5232-99-5	487	45640	yes	no	0.05 mg/kg		Details
2-ethyl-1-hexanol	203-234-3	104-76-7	209	17050	no	no	30 mg/kg		Details
2-methyl-1,3-butadiene	201-143-3	78-79-5	144	21640 19243	no	no	0.01 mg/kg	1 mg/kg in final product.	Details
2-methyl-4-isothiazolin-3-one	220-239-6	2682-20-4	451	66755	yes	no	0.5 mg/kg	Only to be used in aqueous polymer dispersions and emulsions.	Details
2-phenyl-3,3-bis(4-hydroxyphenyl)phthalimidine	455-890-7	6607-41-6	872		no	no	0.05 mg/kg	To be used only as a co-monomer in polycarbonate copolymers.	Details
2-propanol	200-661-7	67-63-0	118	81882 23830	yes	no			Details
2H-perfluoro-[(5,8,11,14-tetramethyl)-tetraethyleneglycol ethyl propyl ether]	-	37486-69-4	903		yes	no		Only to be used as a polymer production aid in the polymerisation of fluoropolymers intended for: (a) repeated and single use materials and articles when sintered or processed (non-sintered) at temperatures at or above 360 °C for at least 10 minutes or at higher temperatures for equivalent shorter times; (b) repeated use materials and articles when processed (non-sintered) at temperatures from 300 °C and up to 360 °C for at least 10 minutes.	Details
3,3'-dimethyl-4,4'-diaminodicyclohexylmethane	229-962-1	6864-37-5	498	16210	no	no	0.05 mg/kg	Only to be used in polyamides.	Details
3,3'-dimethyl-4,4'-diisocyanatobiphenyl	202-112-7	91-97-4	169	16240	no	no		1 mg/kg in final product expressed as isocyanate moiety.	Details
3,3-bis(3-methyl-4-hydroxyphenyl)2-indolinone	256-318-7	47465-97-4	691	13600	no	no	1.8 mg/kg		Details
3,4-diacetoxy-1-butene 3,4-DIACETOXY-1-BUTENE	421-720-5	18085-02-4	862	15180	no	no	0.05 mg/kg	SML including the hydrolysis product 3,4- dihydroxy-1-butene. Only to be used as a co-monomer for ethylvinylalcohol (EVOH) and polyvinylalcohol (PVOH) copolymers.	Details
3,5-di-tert-butyl-4-hydroxybenzoic acid, 2,4-di-tert-butylphenyl ester	224-166-0	4221-80-1	480	46790	yes	no			Details
3,5-di-tert-butyl-4-hydroxybenzoic acid, hexadecyl ester	267-342-2	67845-93-6	721	46800	yes	no			Details
3,5-di-tert-butyl-4-hydroxybenzylphosphonic acid, dioctadecyl ester	221-532-1	3135-18-0	459	46870	yes	no			Details
3,5-di-tert-butyl-4-hydroxybenzylphosphonic acid, monoethyl ester, calcium salt	265-512-0	65140-91-2	715	46880	yes	no	6 mg/kg		Details
3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoic acid, esters with C13-C15 branched and linear alcohols ANOX 1315; ANOX BF; DURAD AX 38	413-750-2	171090-93-0	895	47060	yes	no	0.05 mg/kg	Only to be used in polyolefins in contact with foods other than fatty/ high-alcoholic and dairy products.	Details
3-aminocrotonic acid, diester with thiobis (2-hydroxyethyl) ether	236-946-8	13560-49-1	611	35120	yes	no			Details
3-aminopropyltriethoxysilane	213-048-4	919-30-2	377	12786	no	no	0.05 mg/kg	Residual extractable content of 3-aminopropyltriethoxysilane to be less than 3 mg/kg filler when used for the reactive surface treatment of inorganic fillers. SML = 0,05 mg/kg when used for the surface treatment of materials and articles.	Details
3-buten-2-ol	209-929-8	598-32-3	357	13932	no	no	0.01 mg/kg	Only to be used as a co-monomer for the preparation of polymeric additive.	Details
3-chlorophthalic anhydride	204-179-8	117-21-5	786	14627	no	no	0.05 mg/kg	SML expressed as 3-chlorophthalic acid.	Details
3-hydroxybutanoic acid-3-hydroxypentanoic acid, copolymer	616-996-0	80181-31-3	744	18888	no	no		The substance is used as product obtained by bacterial fermentation. In compliance with the specifications mentioned in the Table 4 of Annex I.	Details
3-methyl-1,5-pentanediol	224-709-1	4457-71-0	883	22074	no	no	0.05 mg/kg	Only to be used in materials in contact with food at a surface to mass ratio up to 0,5 dm2/kg.	Details
3-methyl-1-butene	209-249-1	563-45-1	351	21730	no	no	0.01 mg/kg	Only to be used in polypropylene.	Details
3H-perfluoro-3-[(3-methoxy-propoxy) propanoic acid], ammonium salt	-	958445-44-8	896	71958	yes	no		Only to be used in the polymerisation of fluoropolymers when: (1.) processed at temperatures higher than 280 °C for at least 10 minutes, (2.) processed at temperatures higher than 190 °C up to 30 % w/w for use in blends with polyoxymethylene polymers and intended for repeated use articles.	Details
4,4'-diaminodiphenyl sulphone	201-248-4	80-08-0	153	15267	no	no	5 mg/kg		Details
4,4'-dichlorodiphenyl sulphone	201-247-9	80-07-9	152	15610	no	no	0.05 mg/kg		Details
4,4'-difluorobenzophenone	206-466-3	345-92-6	337	15820	no	no	0.05 mg/kg		Details
4,4'-dihydroxybenzophenone	210-288-1	611-99-4	359	15970 48720	yes	no			Details
4,4'-dihydroxybiphenyl	202-200-5	92-88-6	170	16000	no	no	6 mg/kg		Details
4,4'-dihydroxydiphenyl sulphone	201-250-5	80-09-1	154	13617 16090	no	no	0.05 mg/kg		Details
4,4'-methylenebis(3-chloro-2,6-diethylaniline)	402-130-7	106246-33-7	755	21765	no	no	0.05 mg/kg		Details
4,4'-oxybis(benzenesulphonyl azide)	431-850-4	7456-68-0	502	22778	no	no	0.05 mg/kg		Details
4-(hydroxymethyl)-1-cyclohexene	216-847-6	1679-51-2	427	18896	no	no	0.05 mg/kg		Details
4-chlorophthalic anhydride	204-251-9	118-45-6	787	14628	no	no	0.05 mg/kg	SML expressed as 4-chlorophthalic acid.	Details
4-cumylphenol	209-968-0	599-64-4	358	14841	no	no	0.05 mg/kg		Details
4-ethoxybenzoic acid, ethyl ester	245-818-0	23676-09-7	632	52880	yes	no	3.6 mg/kg		Details
4-hydroxybenzoic acid, ethyl ester	204-399-4	120-47-8	287	60160	yes	no			Details
4-hydroxybenzoic acid, isopropyl ester	224-069-3	4191-73-5	478	60180	yes	no			Details
4-hydroxybenzoic acid, methyl ester	202-785-7	99-76-3	189	60200	yes	no			Details
4-hydroxybenzoic acid, propyl ester	202-307-7	94-13-3	173	60240	yes	no			Details
4-methyl-1-pentene	211-720-1	691-37-2	366	22150	no	no	0.05 mg/kg		Details
4-tert-butylphenol	202-679-0	98-54-4	186	14020	no	no	0.05 mg/kg		Details
5,7-di-tert-butyl-3-(3,4- and 2,3-dimethylphenyl)-3H-benzofuran-2-one containing: a) 5,7-di-tert-butyl-3-(3,4-dimethylphenyl)-3H-benzofuran-2-one (80 to 100 % w/w) and b) 5,7-di-tert-butyl-3-(2,3-dimethylphenyl)-3H-benzofuran-2-one (0 to 20 % w/w)	-	-	26	46700	yes	no	5 mg/kg		Details
5-ethylidenebicyclo[2,2,1]hept-2-ene	240-347-7	16219-75-3	621	17110	no	no	0.05 mg/kg		Details
5-sulphoisophthalic acid, monosodium salt, dimethyl ester	223-578-8	3965-55-7	471	24888	no	no	0.05 mg/kg		Details
5-sulphoisophthalic acid, salts	-	-	823	24889	no	no	5 mg/kg		Details
6-amino-1,3-dimethyluracil	229-662-0	6642-31-5	495	35160	yes	no	5 mg/kg		Details
6-hydroxy-2-naphthalenecarboxylic acid	240-759-7	16712-64-4	624	18897	no	no	0.05 mg/kg		Details
7-[2H-naphtho-(1,2-D)triazol-2-yl]-3-phenylcoumarin	222-067-7	3333-62-8	465	68040	yes	no			Details
9,10-dihydroxy stearic acid	204-432-2	120-87-6	27	48960	yes	no	5 mg/kg		Details
9,10-dihydroxy stearic acid, oligomers	-	-	27	48960	yes	no	5 mg/kg		Details
[3-(2,3-epoxypropoxy)propyl]trimethoxy silane	219-784-2	2530-83-8	1068		no	no		Only to be used as a component of a sizing agent to treat glass fibres to be embedded in glass-fibre-reinforced low diffusivity plastics (polyethylene terephthalate (PET), polycarbonate (PC), polybutylene terephthalate (PBT), thermoset polyesters and epoxy bisphenol vinylester) in contact with all foodstuffs. In treated glass fibres, residues of the substance must not be detectable at 0,01 mg/kg for the substance and 0,06 mg/kg for each of the reaction products (hydrolysed monomers and epoxy-containing cyclic dimer, trimer and tetramer).	Details
[3-(methacryloxy)propyl]trimethoxysilane	219-785-8	2530-85-0	788	21498	no	no	0.05 mg/kg	Only to be used as a surface treatment agent of inorganic fillers.	Details
abietic acid	208-178-3	514-10-3	346	10030	no	no			Details
acetaldehyde	200-836-8	75-07-0	128	10060	no	no			Details
acetic acid	200-580-7	64-19-7	115	30000 10090	yes	no			Details
acetic acid, butyl ester	204-658-1	123-86-4	300	30045	yes	no			Details
acetic acid, ethyl ester	205-500-4	141-78-6	327	30140	yes	no			Details
acetic acid, vinyl ester	203-545-4	108-05-4	231	10120	no	no	12 mg/kg		Details
acetic anhydride	203-564-8	108-24-7	232	30280 10150	yes	no			Details
acetone	200-662-2	67-64-1	119	30295	yes	no			Details
acetylacetic acid, salts	-	-	7	30370	yes	no			Details
acetylated mono- and diglycerides of fatty acids	-	-	8	30401	yes	no			Details
acetylene	200-816-9	74-86-2	126	10210	no	no			Details
acids, aliphatic, monocarboxylic (C6-C22), esters with polyglycerol	-	-	11	30960	yes	no			Details
acids, C2-C24, aliphatic, linear, monocarboxylic from natural oils and fats, and their mono-, di- and triglycerol esters (branched fatty acids at naturally occuring levels are included)	-	-	9	30610	yes	no			Details
acids, C2-C24, aliphatic, linear, monocarboxylic, from natural oils and fats, lithium salt	-	-	801	30607	yes	no			Details
acids, C2-C24, aliphatic, linear, monocarboxylic, synthetic and their mono-, di- and triglycerol esters	-	-	10	30612	yes	no			Details
acids, fatty (C8-C22) from animal or vegetable fats and oils, esters with alcohols, linear, aliphatic, monohydric, saturated, primary (C1-C22)	-	-	879	31336	yes	no			Details
acids, fatty (C8-C22) from animal or vegetable fats and oils, esters with branched alcohols, aliphatic, monohydric, saturated, primary (C3-C22)	-	-	878	31335	yes	no			Details
acids, fatty (C8-C22), esters with pentaerythritol	-	-	880	31348	yes	no			Details
acids, fatty, from animal or vegetable food fats and oils	-	-	12	31328	yes	no			Details
acids, fatty, unsaturated (C18), dimers, hydrogenated, distilled and non-distilled	500-231-1	68783-41-5	733	10599/93 10599/92A	no	no			Details
acids, fatty, unsaturated (C18), dimers, non hydrogenated, distilled and non-distilled	500-148-0	61788-89-4	705	10599/91 10599/90A	no	no			Details
acrylamide	201-173-7	79-06-1	145	10630	no	no	0.01 mg/kg		Details
acrylic acid	201-177-9	79-10-7	147	10690	no	no			Details
acrylic acid, 2-ethylhexyl ester	203-080-7	103-11-7	206	11500	no	no	0.05 mg/kg		Details

Showing 1 - 200 of 1,080 results.

Export search results to: