plastic-material-food-contact
plastic-material-food-contact
FCM and Articles Regulation, Annex I - Authorised Substances
EU. Union List of Authorized Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation (EU) 2023/1627, OJ L 201, 11 August 2023
This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.
Last updated 25 April 2024. Database contains 1080 unique substances/entries.
Filter the list
|
CYASORB(R) UV-3638 LIGHT STABILISER
|
418-280-1
|
18600-59-4
|
796 |
72141 |
yes |
yes |
0.05 mg/kg |
SML including the sum of its hydrolysis products. |
Details |
|
-
|
-
|
97 |
72081/10 |
yes |
no |
Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermalpolymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing. Properties: Viscosity at 120 °C: > 3 Pa.s,Softening point: > 95 °C as determined by ASTM Method E 28-67,Bromine number: < 40 (ASTM D1159),The colour of a 50 % solution in toluene < 11 on the Gardner scale,Residual aromatic monomer ≤ 50 ppm. |
Details | ||
|
236-236-8
|
13252-13-6
|
861 |
71990 |
yes |
no |
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C and are intended for use in repeated use articles. |
Details | ||
|
-
|
-
|
861 |
71990 |
yes |
no |
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C and are intended for use in repeated use articles. |
Details | ||
|
680-272-0
|
51798-33-5
|
860 |
71980 |
yes |
no |
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C and are intended for use in repeated use articles. |
Details | ||
|
223-320-4
|
3825-26-1
|
468 |
71960 |
yes |
no |
Only to be used in repeated use articles, sintered at high temperatures. |
Details | ||
|
-
|
958445-44-8
|
896 |
71958 |
yes |
no |
Only to be used in the polymerisation of fluoropolymers when: (1.) processed at temperatures higher than 280 °C for at least 10 minutes, (2.) processed at temperatures higher than 190 °C up to 30 % w/w for use in blends with polyoxymethylene polymers and intended for repeated use articles. |
Details | ||
|
700-323-3
|
908020-52-0
|
926 |
71955 |
yes |
no |
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures higher than 300 °C for at least 10 minutes. |
Details | ||
|
682-234-9
|
329238-24-6
|
854 |
71943 |
yes |
no |
Only to be used in concentrations up to 0,5 % w/w in the polymerisation of fluoropolymers that are processed at temperatures at or above 340 °C and are intended for use in repeated use articles. |
Details | ||
|
-
|
-
|
822 |
71938 |
yes |
no |
Details | |||