plastic-material-food-contact

FCM and Articles Regulation, Annex I - Authorised Substances

EU. Union List of Authorized Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation (EU) 2023/1627, OJ L 201, 11 August 2023

This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.

RELEVANT LEGISLATION
Last updated 03 May 2024. Database contains 1080 unique substances/entries.
Filter the list

Substance Name
EC No.
CAS No.
FCM No
Ref No.
Additive or PPA
FRF applicable
SML (mg/kg)
Restriction(s)
 
N-(2,6-diisopropylphenyl)-6-[4-(1,1,3,3-tetramethylbutyl)phenoxy]-1H-benzo[de]isoquinolin-1,3(2H)-dione
-
852282-89-4
809
49080
yes
yes
0.05 mg/kg
Only for use in PET.
 Details
polyethylene glycol (EO = 1-30, typically 5) ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate
-
-
76
77732
yes
no
0.05 mg/kg
Only for use in PET.
 Details
polyethyleneglycol (EO = 1-30, typically 5) ether of butyl-2-cyano-3-(4-hydroxyphenyl) acrylate
-
-
77
77733
yes
no
0.05 mg/kg
Only for use in PET.
 Details
triethyl phosphonoacetate
212-757-6
867-13-0
800
94425
yes
no
Only for use in PET.
 Details
2,2,4,4-tetramethylcyclobutane-1,3-diol
221-140-0
3010-96-6
881
25187
no
no
5 mg/kg
Only for: (a) repeated use articles for long term storage at room temperature or below and hotfill; (b) single use materials and articles as a co-monomer at a maximum use level of 35 mole % of the diol component of polyesters, and if such materials and articles are for long term storage at room temperature or below of food types which have an alcohol content of up to 10 % and for which Table 2 of Annex III does not assign simulant D2. Hot fill conditions are allowed for such single use materials and articles.
 Details
All salts of Al, NH4, Ba, Ca, Co, Cu, Fe, Li, Mg, Mn, K, Na, Zn, Eu, Gd, La and Tb of 2,2,4,4-Tetramethylcyclobutane-1,3-diol
-
-
881
25187
no
no
5 mg/kg
Only for: (a) repeated use articles for long term storage at room temperature or below and hotfill; (b) single use materials and articles as a co-monomer at a maximum use level of 35 mole % of the diol component of polyesters, and if such materials and articles are for long term storage at room temperature or below of food types which have an alcohol content of up to 10 % and for which Table 2 of Annex III does not assign simulant D2. Hot fill conditions are allowed for such single use materials and articles.
 Details
Phosphorous acid, triphenyl ester, polymer with alpha-hydro-omega-hydroxypoly [oxy(methyl-1,2-ethanediyl)], C10-16 alkyl esters
843-672-8
1227937-46-3
1076
yes
no
0.05 mg/kg
Only to be used (a)as an additive at up to 0.2 % w/w in high impact polystyrene materials and articles intended for contact with food at room temperature and below, including hot-fill and/or heating up to 100 ° C for up to 2 hours. It shall not be used in contact with foods for which simulant C and/or D1 is assigned in Annex III; (b)as an additive at up to 0.025 % w/w in acrylonitrile-butadiene-styrene (ABS) materials for use at room temperature and below.
 Details
isobutane
200-857-2
75-28-5
1069
yes
no
Only to be used as a blowing agent.
 Details
1,10-decanediamine
211-471-9
646-25-3
863
15260
no
no
0.05 mg/kg
Only to be used as a co-monomer for manufacturing polyamide articles for repeated use in contact with aqueous, acidic and dairy foodstuffs at room temperature or for short term contact up to 150 °C.
 Details
3-buten-2-ol
209-929-8
598-32-3
357
13932
no
no
0.01 mg/kg
Only to be used as a co-monomer for the preparation of polymeric additive.
 Details
Page 8 of 108
10 Items per Page
Showing 71 - 80 of 1,080 results.

Export search results to: