plastic-material-food-contact

FCM and Articles Regulation, Annex I - Authorised Substances

EU. Union List of Authorized Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation (EU) 2023/1627, OJ L 201, 11 August 2023

This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.

Last updated 24 April 2024. Database contains 1080 unique substances/entries.
Filter the list

 
-
-
808
38550
yes
no
5 mg/kg
SML including the sum of its hydrolysis products.
Details
-
-
743
38950
yes
no
Details
-
-
766
38879
yes
no
Details
-
-
194
13150
no
no
Details
-
-
116
37600
13090
yes
no
Details
-
-
272
37040
yes
no
Details
-
-
302
12820
no
no
Details
-
-
101
36000
yes
no
Details
-
-
518
35845
yes
no
Details
-
-
345
35840
yes
no
Details
-
-
566
33350
yes
no
Details
-
-
303
31730
12130
yes
no
Details
-
-
147
10690
no
no
Details
-
-
115
30000
10090
yes
no
Details
-
-
346
10030
no
no
Details
-
-
186
14020
no
no
0.05 mg/kg
Details
-
-
358
14841
no
no
0.05 mg/kg
Details
-
-
178
92800
yes
yes
0.48 mg/kg
Details
-
-
357
13932
no
no
0.01 mg/kg
Only to be used as a co-monomer for the preparation of polymeric additive.
Details
-
-
118
81882
23830
yes
no
Details
-
-
209
17050
no
no
30 mg/kg
Details
-
-
326
35170
12763
yes
no
0.05 mg/kg
Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.
For indirect food contact only, behind a PET layer.
Details
-
-
617
10660
no
no
0.05 mg/kg
Details
-
-
770
51700
yes
no
0.05 mg/kg
Details
-
-
389
22360
no
no
5 mg/kg
Details
-
-
352
16360
no
no
0.05 mg/kg
Details
-
-
315
46640
yes
no
3 mg/kg
Details
-
-
477
46720
yes
yes
4.8 mg/kg
Details
-
-
765
49485
yes
yes
1 mg/kg
Details
-
-
756
40020
yes
yes
Details
-
-
758
38940
yes
yes
Details
-
-
882
25872
no
no
0.05 mg/kg
Details
-
-
484
13395
no
no
0.05 mg/kg
Details
-
-
881
25187
no
no
5 mg/kg
Only for: (a) repeated use articles for long term storage at room temperature or below and hotfill; (b) single use materials and articles as a co-monomer at a maximum use level of 35 mole % of the diol component of polyesters, and if such materials and articles are for long term storage at room temperature or below of food types which have an alcohol content of up to 10 % and for which Table 2 of Annex III does not assign simulant D2. Hot fill conditions are allowed for such single use materials and articles.
Details
-
-
472
66560
yes
yes
Details
-
-
137
66580
yes
yes
Details
-
-
285
66480
yes
yes
Details
-
-
214
61840
yes
no
Details
-
-
369
12761
no
no
0.05 mg/kg
Details
-
-
443
12788
no
no
5 mg/kg
Details
-
-
122
23800
no
no
Details
-
-
124
22870
no
no
Details
-
-
265
22600
no
no
Details
-
-
331
22480
no
no
Details
-
-
681
18310
no
no
Details
-
-
267
15100
no
no
Details
-
-
123
13840
no
no
Details
-
-
361
18700
no
no
0.05 mg/kg
Details
-
-
364
15404
no
no
5 mg/kg
Only to be used as: (a) a co-monomer in poly (ethylene-co-isosorbide terephthalate); (b) a co-monomer at levels of up to 40 mole % of the diol component in combination with ethylene glycol and/or 1,4-bis(hydroxymethyl)cyclohexane, for the production of polyesters. Polyesters made using dianhydrosorbitol together with 1,4-bis(hydroxymethyl)cyclohexane shall not be used in contact with foods containing more than 15 % alcohol.
Details
-
-
806
14876
no
no
5 mg/kg
Only to be used for manufacture of polyesters.
Details
-
-
343
23770
no
no
0.05 mg/kg
Details
-
-
109
23740
81840
yes
no
Details
-
-
662
25927
no
no
0.005 mg/kg
Only to be used in polycarbonates.
Details
-
-
752
39890
yes
no
Details
-
-
15
34130
yes
yes
30 mg/kg
Details
-
-
17
34281
yes
no
Details
-
-
16
34230
yes
no
6 mg/kg
Details
-
-
13
33120
yes
no
Details
-
-
3
12375
no
no
Details
-
-
2
12340
no
no
Details
-
-
12
31328
yes
no
Details
-
-
880
31348
yes
no
Details
-
-
878
31335
yes
no
Details
-
-
879
31336
yes
no
Details
-
-
10
30612
yes
no
Details
-
-
801
30607
yes
no
Details
-
-
9
30610
yes
no
Details
-
-
11
30960
yes
no
Details
-
-
8
30401
yes
no
Details
-
-
7
30370
yes
no
Details
-
-
27
48960
yes
no
5 mg/kg
Details
-
-
823
24889
no
no
5 mg/kg
Details
-
-
26
46700
yes
no
5 mg/kg
Details
-
-
979
79987
yes
no
Only to be used in polyethylene terephthalate (PET) at a maximum level of 5 % w/w.
Details
-
-
1016
yes
no
Only to be used up to: (a) 10 % w/w in non-plasticised PVC; (b) 15 % w/w in non-plasticised PLA.
The final material shall be used at room temperature or below.
Details
-
-
866
40620
yes
no
Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 7 %.
Details
-
-
855
40560
yes
no
Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 12 % at room temperature or below.
Details
-
-
998
yes
no
Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage.
When used together with the substance with FCM No 859 and/or the substance with FCM No 1043, the restriction of 10 % w/w applies to the sum of those substances.
The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.
Details
-
-
859
yes
no
Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage.
When used together with the substance with FCM No 998 and/or the substance with FCM No 1043, the restriction of 10 % w/w applies to the sum of those substances.
The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.
Details
-
-
1043
yes
no
Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage.
When used together with the substance with FCM No 859 and/or the substance with FCM No 998, the restriction of 10 % w/w applies to the sum of those substances.
The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.
Details

Export search results to: