plastic-material-food-contact

FCM and Articles Regulation, Annex I - Authorised Substances

EU. Union List of Authorised Substances: Annex I, Plastics Food Contact Regulation 10/2011/EU, as amended by Regulation 2020/1245/EU, 3 September 2020

This list contains the Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. It is taken from Annex I of the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.

Last updated 18 May 2021. Database contains 1072 unique substances/entries.
Filter the list

 
203-027-8
102-39-6
202
23070
no
no
0.05 mg/kg
Details
617-241-8
81541-12-0
752
39890
yes
no
Details
-
-
1043
yes
no
Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage.
When used together with the substance with FCM No 859 and/or the substance with FCM No 998, the restriction of 10 % w/w applies to the sum of those substances.
The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.
Details
-
-
859
yes
no
Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage.
When used together with the substance with FCM No 998 and/or the substance with FCM No 1043, the restriction of 10 % w/w applies to the sum of those substances.
The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.
Details
-
-
998
yes
no
Only to be used as particles in non-plasticised PVC up to 10 % w/w in contact with all food types at room temperature or below including long- term storage.
When used together with the substance with FCM No 859 and/or the substance with FCM No 1043, the restriction of 10 % w/w applies to the sum of those substances.
The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm.
Details
-
-
855
40560
yes
no
Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 12 % at room temperature or below.
Details
-
25101-28-4
856
40563
yes
no
Only to be used in: rigid poly(vinyl chloride) (PVC) at a maximum level of 12 % at room temperature or below; or at up to 40 % w/w in blends of styrene acrylonitrile copolymer (SAN)/poly(methyl methacrylate) (PMMA) repeatuse articles at room temperature or below, and when either in contact only with aqueous, acidic and/or low alcoholic (< 20 %) foodstuffs for less than 1 day, or when in contact only with dry foodstuffs for any duration of time.
Details
-
-
866
40620
yes
no
Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 7 %.
Details
607-698-1
25322-99-0
865
40619
yes
no
Only to be used in: (a) rigid poly(vinyl chloride) (PVC) at a maximum level of 1 % w/w. (b) polylactic acid (PLA) at a maximum level of 5 % w/w.
Details
608-050-0
27136-15-8
869
66763
yes
no
Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 3 %.
Details
-
40471-03-2
867
40815
yes
no
Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 2 %.
Details
618-459-6
9010-88-2
868
53245
yes
no
Only to be used in: (a) rigid poly(vinyl chloride) (PVC) at a maximum level of 2 % w/w. (b) polylactic acid (PLA) at a maximum level of 5 % w/w. (c) polyethylene terephthalate (PET) at a maximum level of 5 % w/w.
Details
-
-
1016
yes
no
Only to be used up to: (a) 10 % w/w in non-plasticised PVC; (b) 15 % w/w in non-plasticised PLA.
The final material shall be used at room temperature or below.
Details
-
37953-21-2
857
66765
yes
no
Only to be used in rigid poly(vinyl chloride) (PVC) at a maximum level of 2 % at room temperature or below.
Details
243-053-7
19430-93-4
973
22931
no
no
Only to be used as a co-monomer up to 0,1 % w/w in the polymerisation of fluoropolymers, sintered at high temperatures.
Details
-
-
979
79987
yes
no
Only to be used in polyethylene terephthalate (PET) at a maximum level of 5 % w/w.
Details
201-074-9
77-99-6
141
13380
25600
94960
yes
no
6 mg/kg
Details
221-950-4
3290-92-4
463
25840
no
no
0.05 mg/kg
Details
405-800-7
27955-94-8
662
25927
no
no
0.005 mg/kg
Only to be used in polycarbonates.
Details
200-866-1
75-37-6
131
48460
yes
no
Details
211-471-9
646-25-3
863
15260
no
no
0.05 mg/kg
Only to be used as a co-monomer for manufacturing polyamide articles for repeated use in contact with aqueous, acidic and dairy foodstuffs at room temperature or for short term contact up to 150 °C.
Details
-
23985-75-3
1066
no
no
0.05 mg/kg
Only to be used as a co-monomer in the manufacture of a polyester non-food contact layer in a plastic multilayer material, which is to be used only in contact with foods for which food simulants A, B, C and/or D1 are assigned in Table 2 of Annex III.
The specific migration limit in column 8 refers to the sum of the substance and of its dimers (cyclic and open chain).
Details
271-090-9
68515-48-0
728
75100
yes
no
Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae as defined by Directive 2006/141/EC or processed cereal-based foods and baby foods for infants and young children as defined by Directive 2006/125/EC;(c)technical support agent in concentrations up to 0,1 % in the final product.
Details
271-090-9
68515-48-0
728
75100
yes
no
Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae as defined by Directive 2006/141/EC or processed cereal-based foods and baby foods for infants and young children as defined by Directive 2006/125/EC;(c)technical support agent in concentrations up to 0,1 % in the final product.
Details
271-091-4
68515-49-1
729
75105
yes
no
Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae as defined by Directive 2006/141/EC or processed cereal-based foods and baby foods for infants and young children as defined by Directive 2006/125/EC;(c)technical support agent in concentrations up to 0,1 % in the final product.
Details
271-091-4
68515-49-1
729
75105
yes
no
Only to be used as: (a)plasticiser in repeated use materials and articles;(b)plasticiser in single-use materials and articles contacting non-fatty foods except for infant formulae and follow-on formulae as defined by Directive 2006/141/EC or processed cereal-based foods and baby foods for infants and young children as defined by Directive 2006/125/EC;(c)technical support agent in concentrations up to 0,1 % in the final product.
Details
204-886-1
128-44-9
902
yes
no
The substance shall comply with the specific purity criteria as set out in Commission Regulation (EU) No 231/2012 (OJ L 83, 22.3.2012, p. 1).
Details
500-311-6
136504-96-6
767
38510
yes
no
5 mg/kg
Details
431-890-2
166412-78-8
775
45705
yes
no
Details
204-427-5
120-80-9
289
24051
15880
no
no
6 mg/kg
Details
200-338-0
57-55-6
109
81840
23740
yes
no
Details
618-414-0
9005-37-2
567
82080
yes
no
Details
245-217-3
22788-19-8
630
82240
yes
no
Details
203-315-3
105-62-4
213
82400
yes
no
Details
251-581-4
33587-20-1
677
82560
yes
no
Details
228-229-3
6182-11-2
491
82720
yes
no
Details
248-315-4
27194-74-7
659
82800
yes
no
Details
215-549-3
1330-80-9
408
82960
yes
no
Details
249-369-1
29013-28-3
665
83120
yes
no
Details
215-354-3
1323-39-3
406
83300
yes
no
Details
224-594-8
4422-95-1
481
13060
no
no
0.05 mg/kg
SML expressed as 1,3,5-benzenetricarboxylic acid.
Details
216-971-0
1709-70-2
428
95200
yes
no
Details
616-108-1
745070-61-5
784
95420
yes
no
5 mg/kg
Details
-
227099-60-7
781
95265
yes
no
0.05 mg/kg
Details
216-032-5
1477-55-0
421
13000
no
no
Details
203-028-3
102-40-9
203
13323
no
no
0.05 mg/kg
Details
222-852-4
3634-83-1
988
no
no
SML(T) applies to the migration of its hydrolysis product, 1,3- benzenedimethanamine.
To be used only as co-monomer in the manufacture of a middle layer coating on a poly(ethylene terephthalate) polymer film in a multilayer film.
Details
203-529-7
107-88-0
228
13690
no
no
Details
203-585-2
108-46-3
237
15910
24072
no
no
2.4 mg/kg
Details
211-463-5
646-06-0
363
16450
no
no
5 mg/kg
Details
203-584-7
108-45-2
236
23050
no
no
0.01 mg/kg
Details
207-997-3
504-63-2
343
23770
no
no
0.05 mg/kg
Details
203-268-9
105-08-8
210
13390
14880
no
no
Details
203-786-5
110-63-4
254
13720
40580
yes
no
Details
219-371-7
2425-79-8
442
13780
no
no
0.01 mg/kg
Residual content = 1 mg/kg in final product expressed as epoxygroup.
Molecular weight is 43 Da.
Details
208-015-6
505-65-7
344
21821
13810
no
no
Details
208-015-6
505-65-7
344
21821
13810
no
no
Details
208-015-6
505-65-7
344
21821
13810
no
no
0.05 mg/kg
Details
214-068-6
1076-97-7
806
14876
no
no
5 mg/kg
Only to be used for manufacture of polyesters.
Details
203-782-3
110-60-1
253
15250
no
no
Details
203-400-5
106-46-7
217
15565
no
no
12 mg/kg
Details
204-617-8
123-31-9
295
18867
15940
48620
yes
no
0.6 mg/kg
Details
211-492-3
652-67-5
364
15404
no
no
5 mg/kg
Only to be used as: (a) a co-monomer in poly (ethylene-co-isosorbide terephthalate); (b) a co-monomer at levels of up to 40 mole % of the diol component in combination with ethylene glycol and/or 1,4-bis(hydroxymethyl)cyclohexane, for the production of polyesters. Polyesters made using dianhydrosorbitol together with 1,4-bis(hydroxymethyl)cyclohexane shall not be used in contact with foods containing more than 15 % alcohol.
Details
221-641-4
3173-72-6
461
22420
no
no
1 mg/kg in final product expressed as isocyanate moiety.
Details
617-335-9
82451-48-7
790
80480
yes
no
5 mg/kg
Average molecular weight not less than 2400 Da.
Residual content of morpholine ≤ 30 mg/kg, of N,N'-bis(2,2,6,6-tetramethylpiperidin-4-yl)hexane-1,6-diamine < 15000 mg/kg, and of 2,4-dichloro-6-morpholino-1,3,5-triazine ≤ 20 mg/kg.
Details
211-074-0
629-11-8
361
18700
no
no
0.05 mg/kg
Details
223-054-9
3710-30-3
1034
no
no
0.05 mg/kg
Only to be used as a crosslinking co-monomer in the manufacture of polyolefins for contact with any type of foods for long term storage at room temperature, including when packaged under hot-fill conditions.
Details
216-711-6
1647-16-1
424
15070
no
no
0.05 mg/kg
Details
613-797-0
65447-77-0
716
60800
yes
no
30 mg/kg
Details
223-805-0
4080-31-3
474
43600
yes
no
0.3 mg/kg
Details
220-666-8
2855-13-2
454
12670
no
no
6 mg/kg
Details
200-751-6
71-36-3
123
13840
no
no
Details
203-449-2
106-98-9
222
13870
no
no
Details
203-956-9
112-30-1
267
15100
no
no
Details
212-819-2
872-05-9
375
15130
no
no
0.05 mg/kg
Details
203-968-4
112-41-4
268
16704
no
no
0.05 mg/kg
Details
253-149-0
36653-82-4
681
18310
no
no
Details
209-753-1
592-41-6
356
18820
no
no
3 mg/kg
Details
223-861-6
4098-71-9
475
19110
no
no
1 mg/kg in final product expressed as isocyanate moiety.
Details
205-583-7
143-08-8
331
22480
no
no
Details
203-917-6
111-87-5
265
22600
no
no
Details
203-893-7
111-66-0
264
22660
no
no
15 mg/kg
Details
200-752-1
71-41-0
124
22870
no
no
Details
203-694-5
109-67-1
245
22900
no
no
5 mg/kg
Details
200-746-9
71-23-8
122
23800
no
no
Details
214-306-9
1120-36-1
388
25080
no
no
0.05 mg/kg
Details
214-012-0
1072-63-5
387
26155
no
no
0.05 mg/kg
Details
219-417-6
2432-99-7
443
12788
no
no
5 mg/kg
Details
211-754-7
693-57-2
369
12761
no
no
0.05 mg/kg
Details
203-366-1
106-14-9
214
61840
yes
no
Details
617-688-9
85209-93-4
750
66350
yes
no
5 mg/kg
Details
274-572-7
70331-94-1
739
70000
yes
no
Details
221-140-0
3010-96-6
881
25187
no
no
5 mg/kg
Only for: (a) repeated use articles for long term storage at room temperature or below and hotfill; (b) single use materials and articles as a co-monomer at a maximum use level of 35 mole % of the diol component of polyesters, and if such materials and articles are for long term storage at room temperature or below of food types which have an alcohol content of up to 10 % and for which Table 2 of Annex III does not assign simulant D2. Hot fill conditions are allowed for such single use materials and articles.
Details
229-934-9
6846-50-0
497
95020
yes
no
5 mg/kg
Only to be used in single-use gloves.
Details
201-245-8
80-05-7
151
13607
13480
no
no
0.05 mg/kg
Not to be used for the manufacture of polycarbonate infant [Infant as defined in Article 2(2)(a) of Regulation (EU) No 609/2013] feeding bottles [This restriction is applicable from 1 May 2011 as regards the manufacture and from 1 June 2011 as regards the placing on the market and importation into the Union].
Not to be used for the manufacture of polycarbonate drinking cups or bottles which, due to their spill proof characteristics, are intended for infants [Infant as defined in Article 2(2)(a) of Regulation (EU) No 609/2013] and young children [Young children as defined in Article 2(2)(b) of Regulation (EU) No 609/2013].
Details
216-823-5
1675-54-3
426
13510
13610
no
no
In compliance with Commission Regulation (EC) No 1895/2005 [OJ L 302, 19.11.2005, p. 28].
Details
253-781-7
38103-06-9
687
13614
13530
no
no
0.05 mg/kg
Details
225-306-3
4767-03-7
484
13395
no
no
0.05 mg/kg
Details
204-781-0
126-30-7
310
22437
16390
no
no
0.05 mg/kg
Details
-
1547-26-8
1063
no
no
Only to be used together with tetrafluoroethylene and/or ethylene co-monomers to manufacture fluorocopolymers for application as polymer processing aid at up to 0,2 % w/w of the food contact material, and when the low-molecular mass fraction below 1 500 Da in the fluorocopolymer does not exceed 30 mg/kg.
Details
219-330-3
2416-94-6
882
25872
no
no
0.05 mg/kg
Details
813-638-7
80512-44-3
1061
no
no
Only to be used as a comonomer in the manufacture of polyether ether ketone plastics up to 0,3 % w/w of the final material.
Details
203-615-4
108-78-1
239
93720
19975
25420
yes
no
2.5 mg/kg
Details
485-230-3
1455-42-1
1052
no
no
5 mg/kg
Only to be used as a monomer in the production of polyesters.
The migration of oligomers of less than 1 000 Da shall not exceed 50 µg/kg food (expressed as SPG).
Details
412-440-4
2725-22-6
452
38885
yes
no
5 mg/kg
Details
200-254-4
56-06-4
864
46330
yes
no
5 mg/kg
Only to be used in rigid poly(vinyl chloride) (PVC) in contact with non-acidic and non-alcoholic aqueous food.
Details
202-095-6
91-76-9
168
13075
15310
no
no
5 mg/kg
Details
205-029-4
131-56-6
318
48640
yes
no
Details
209-544-5
584-84-9
354
25210
no
no
1 mg/kg in final product expressed as isocyanate moiety.
Details
247-953-0
26747-90-0
653
25270
no
no
1 mg/kg in final product expressed as isocyanate moiety.
Details
204-881-4
128-37-0
315
46640
yes
no
3 mg/kg
Details
209-400-1
576-26-1
352
16360
no
no
0.05 mg/kg
Details
214-527-0
1141-38-4
389
22360
no
no
5 mg/kg
Details
212-661-4
840-65-3
373
22390
no
no
0.05 mg/kg
Details
202-039-0
91-08-7
167
25240
no
no
1 mg/kg in final product expressed as isocyanate moiety.
Details
219-470-5
2440-22-4
444
61440
yes
no
Details
CG 30-1577
411-380-6
147315-50-2
770
51700
yes
no
0.05 mg/kg
Details
239-268-0
15214-89-8
617
10660
no
no
0.05 mg/kg
Details
201-851-2
88-68-6
164
34895
yes
no
0.05 mg/kg
Only for use in PET for water and beverages.
Details
205-483-3
141-43-5
326
12763
35170
yes
no
0.05 mg/kg
Not to be used for articles in contact with fatty foods for which simulant D1 and/or D2 is laid down.
For indirect food contact only, behind a PET layer.
Details
203-452-9
107-01-7
224
13900
no
no
Details
228-250-8
6197-30-4
492
45650
yes
no
0.05 mg/kg
Details
226-029-0
5232-99-5
487
45640
yes
no
0.05 mg/kg
Details
203-234-3
104-76-7
209
17050
no
no
30 mg/kg
Details
201-143-3
78-79-5
144
19243
21640
no
no
0.01 mg/kg
1 mg/kg in final product.
Details
220-239-6
2682-20-4
451
66755
yes
no
0.5 mg/kg
Only to be used in aqueous polymer dispersions and emulsions.
Details
455-890-7
6607-41-6
872
no
no
0.05 mg/kg
To be used only as a co-monomer in polycarbonate copolymers.
Details
200-661-7
67-63-0
118
23830
81882
yes
no
Details
-
37486-69-4
903
yes
no
Only to be used as a polymer production aid in the polymerisation of fluoropolymers intended for: (a) repeated and single use materials and articles when sintered or processed (non-sintered) at temperatures at or above 360 °C for at least 10 minutes or at higher temperatures for equivalent shorter times; (b) repeated use materials and articles when processed (non-sintered) at temperatures from 300 °C and up to 360 °C for at least 10 minutes.
Details
229-962-1
6864-37-5
498
16210
no
no
0.05 mg/kg
Only to be used in polyamides.
Details
202-112-7
91-97-4
169
16240
no
no
1 mg/kg in final product expressed as isocyanate moiety.
Details
256-318-7
47465-97-4
691
13600
no
no
1.8 mg/kg
Details
421-720-5
18085-02-4
862
15180
no
no
0.05 mg/kg
SML including the hydrolysis product 3,4- dihydroxy-1-butene.
Only to be used as a co-monomer for ethylvinylalcohol (EVOH) and polyvinylalcohol (PVOH) copolymers.
Details
224-166-0
4221-80-1
480
46790
yes
no
Details
267-342-2
67845-93-6
721
46800
yes
no
Details
221-532-1
3135-18-0
459
46870
yes
no
Details
265-512-0
65140-91-2
715
46880
yes
no
6 mg/kg
Details
413-750-2
171090-93-0
895
47060
yes
no
0.05 mg/kg
Only to be used in polyolefins in contact with foods other than fatty/ high-alcoholic and dairy products.
Details
236-946-8
13560-49-1
611
35120
yes
no
Details
213-048-4
919-30-2
377
12786
no
no
0.05 mg/kg
Residual extractable content of 3-aminopropyltriethoxysilane to be less than 3 mg/kg filler when used for the reactive surface treatment of inorganic fillers.
SML = 0,05 mg/kg when used for the surface treatment of materials and articles.
Details
209-929-8
598-32-3
357
13932
no
no
0.01 mg/kg
Only to be used as a co-monomer for the preparation of polymeric additive.
Details
204-179-8
117-21-5
786
14627
no
no
0.05 mg/kg
SML expressed as 3-chlorophthalic acid.
Details
616-996-0
80181-31-3
744
18888
no
no
The substance is used as product obtained by bacterial fermentation. In compliance with the specifications mentioned in the Table 4 of Annex I.
Details
224-709-1
4457-71-0
883
22074
no
no
0.05 mg/kg
Only to be used in materials in contact with food at a surface to mass ratio up to 0,5 dm2/kg.
Details
209-249-1
563-45-1
351
21730
no
no
0.01 mg/kg
Only to be used in polypropylene.
Details
-
958445-44-8
896
71958
yes
no
Only to be used in the polymerisation of fluoropolymers when: (1.) processed at temperatures higher than 280 °C for at least 10 minutes, (2.) processed at temperatures higher than 190 °C up to 30 % w/w for use in blends with polyoxymethylene polymers and intended for repeated use articles.
Details
201-248-4
80-08-0
153
15267
no
no
5 mg/kg
Details
201-247-9
80-07-9
152
15610
no
no
0.05 mg/kg
Details
206-466-3
345-92-6
337
15820
no
no
0.05 mg/kg
Details
210-288-1
611-99-4
359
15970
48720
yes
no
Details
202-200-5
92-88-6
170
16000
no
no
6 mg/kg
Details
201-250-5
80-09-1
154
13617
16090
no
no
0.05 mg/kg
Details
402-130-7
106246-33-7
755
21765
no
no
0.05 mg/kg
Details
431-850-4
7456-68-0
502
22778
no
no
0.05 mg/kg
Details
216-847-6
1679-51-2
427
18896
no
no
0.05 mg/kg
Details
204-251-9
118-45-6
787
14628
no
no
0.05 mg/kg
SML expressed as 4-chlorophthalic acid.
Details
209-968-0
599-64-4
358
14841
no
no
0.05 mg/kg
Details
245-818-0
23676-09-7
632
52880
yes
no
3.6 mg/kg
Details
204-399-4
120-47-8
287
60160
yes
no
Details
224-069-3
4191-73-5
478
60180
yes
no
Details
202-785-7
99-76-3
189
60200
yes
no
Details
202-307-7
94-13-3
173
60240
yes
no
Details
211-720-1
691-37-2
366
22150
no
no
0.05 mg/kg
Details
202-679-0
98-54-4
186
14020
no
no
0.05 mg/kg
Details
-
-
26
46700
yes
no
5 mg/kg
Details
240-347-7
16219-75-3
621
17110
no
no
0.05 mg/kg
Details
223-578-8
3965-55-7
471
24888
no
no
0.05 mg/kg
Details
-
-
823
24889
no
no
5 mg/kg
Details
229-662-0
6642-31-5
495
35160
yes
no
5 mg/kg
Details
240-759-7
16712-64-4
624
18897
no
no
0.05 mg/kg
Details
222-067-7
3333-62-8
465
68040
yes
no
Details
204-432-2
120-87-6
27
48960
yes
no
5 mg/kg
Details
-
-
27
48960
yes
no
5 mg/kg
Details
219-784-2
2530-83-8
1068
no
no
Only to be used as a component of a sizing agent to treat glass fibres to be embedded in glass-fibre-reinforced low diffusivity plastics (polyethylene terephthalate (PET), polycarbonate (PC), polybutylene terephthalate (PBT), thermoset polyesters and epoxy bisphenol vinylester) in contact with all foodstuffs. In treated glass fibres, residues of the substance must not be detectable at 0,01 mg/kg for the substance and 0,06 mg/kg for each of the reaction products (hydrolysed monomers and epoxy-containing cyclic dimer, trimer and tetramer).
Details
219-785-8
2530-85-0
788
21498
no
no
0.05 mg/kg
Only to be used as a surface treatment agent of inorganic fillers.
Details
208-178-3
514-10-3
346
10030
no
no
Details
200-836-8
75-07-0
128
10060
no
no
Details
200-580-7
64-19-7
115
10090
30000
yes
no
Details
204-658-1
123-86-4
300
30045
yes
no
Details
205-500-4
141-78-6
327
30140
yes
no
Details
203-545-4
108-05-4
231
10120
no
no
12 mg/kg
Details
203-564-8
108-24-7
232
30280
10150
yes
no
Details
200-662-2
67-64-1
119
30295
yes
no
Details
-
-
7
30370
yes
no
Details
-
-
8
30401
yes
no
Details
200-816-9
74-86-2
126
10210
no
no
Details
-
-
11
30960
yes
no
Details
-
-
9
30610
yes
no
Details
-
-
801
30607
yes
no
Details
-
-
10
30612
yes
no
Details
-
-
879
31336
yes
no
Details
-
-
878
31335
yes
no
Details
-
-
880
31348
yes
no
Details
-
-
12
31328
yes
no
Details
500-231-1
68783-41-5
733
10599/93
10599/92A
no
no
Details
500-148-0
61788-89-4
705
10599/91
10599/90A
no
no
Details
201-173-7
79-06-1
145
10630
no
no
0.01 mg/kg
Details
201-177-9
79-10-7
147
10690
no
no
Details
203-080-7
103-11-7
206
11500
no
no
0.05 mg/kg
Details
213-663-8
999-61-1
385
11530
no
no
0.05 mg/kg
SML expressed as the sum of acrylic acid, 2-hydroxypropyl ester and acrylic acid, 2-hydroxyisopropyl ester.
It may contain up to 25 % (m/m) of acrylic acid, 2-hydroxyisopropyl ester (CAS No 0002918-23-2).
Details

Export search results to:

Categories Display