pregnant-women-protection

EU. Chemical Agents: Annexes I & II, Dir. 92/85/EEC on Pregnant Workers, 28 November 1992 (updated by table 3 of Annex VI to CLP, 5 Oct 2018)

This list contains substances to which pregnant workers and workers who have recently given birth or are breastfeeding may not be exposed. This is only a partial list; employers are obliged to prevent the exposure of these workers to any agents that may cause adverse health effect for either mother or child. This list is generated from hazardous substances listed in Directive 92/85/EEC and from table 3.2 of Annex VI of the CLP.

Last updated 13 October 2020. Database contains 1985 unique substances/entries.
Filter the list

 
201-004-7
77-09-8
Carc. 1B; Muta. 2; Repr. 2
yes
Details
The combination of phenols extracted, using isobutyl acetate, from the ammonia liquor condensed from the gas evolved in low-temperature (less than 700°C (1292°F)) destructive distillation of coal. It consists predominantly of a mixture of monohydric and dihydric phenols.
284-881-9
84988-93-2
Carc. 1B; Muta. 1B
yes
Details
293-435-2
91079-47-9
Carc. 1B; Muta. 1B
yes
Details
204-557-2
122-60-1
Carc. 1B; Muta. 2
yes
Details
202-873-5
100-63-0
Carc. 1B; Muta. 2
yes
Details
248-259-0
27140-08-5
Carc. 1B; Muta. 2
yes
Details
200-444-7
59-88-1
Carc. 1B; Muta. 2
yes
Details
257-622-2
52033-74-6
Carc. 1B; Muta. 2
yes
Details
236-116-5
13171-21-6
Muta. 2
yes
Details
-
17169-61-8
Carc. 1A
yes
Details
The heat treated residue from the distillation of high temperature coal tar. A black solid with an approximate softening point from 80°C to 180°C (176°F to 356°F). Composed primarily of a complex mixture of three or more membered condensed ring aromatic hydrocarbons.
310-162-7
121575-60-8
Carc. 1B
yes
Details
The residue obtained during the distillation of high boiling fractions from bituminous coal high temperature tar and/or pitch coke oil, with a softening point of 140° to 170°C (284°F to 392°F) according to DIN 52025. Composed primarily of tri- and polynuclear aromatic compounds which also contain heteroatoms.
302-650-3
94114-13-3
Carc. 1B
yes
Details
The residue from the distillation of high temperature coal tar. A black solid with an approximate softening point from 30°C to 180°C (86°F to 356°F). Composed primarily of a complex mixture of three or more membered condensed ring aromatic hydrocarbons.
266-028-2
65996-93-2
Carc. 1A; Muta. 1B; Repr. 1B
yes
Details
A complex black solid obtained by the heat treatment of low temperature coal tar pitch. It has a softening point within the approximate range of 50°C to 140°C (122°F to 284°F). Composed primarily of a complex mixture of aromatic compounds.
292-653-5
90669-58-2
Carc. 1B
yes
Details
The product obtained by air-blowing, at elevated temperature, low-temperature coal tar pitch. It has a softening-point within the approximate range of 70°C to 180°C (158°F to 356°F). Composed primarily of a complex mixture of hydrocarbons.
292-654-0
90669-59-3
Carc. 1B
yes
Details
A complex black solid or semi-solid obtained from the distillation of a low temperature coal tar. It has a softening point within the approximate range of 40°C to 180°C (104°F to 356°F). Composed primarily of a complex mixture of hydrocarbons.
292-651-4
90669-57-1
Carc. 1B
yes
Details
The residue from the distillation of a mixture of coal tar and aromatic petroleum streams. A solid with a softening point from 40°C to 180°C (104°F to 356°F). Composed primarily of a complex combination of three or more membered condensed ring aromatic hydrocarbons.
269-109-0
68187-57-5
Carc. 1B
yes
Details
263-072-4
61789-60-4
Carc. 1B
yes
Details
231-829-8
7758-01-2
Carc. 1B
yes
Details
232-140-5
7789-00-6
Carc. 1B; Muta. 1B
yes
Details
231-906-6
7778-50-9
Carc. 1B; Muta. 1B; Repr. 1B
yes
Details
200-879-2
75-56-9
Carc. 1B; Muta. 1B
yes
Details
The complex combination of polyalkylated pyridines derived from coal tar distillation or as high-boiling distillates approximately above 150°C (302°F) from the reaction of ammonia with acetaldehyde, formaldehyde or paraformaldehyde.
269-929-9
68391-11-7
Carc. 1B; Muta. 1B
yes
Details
201-762-9
87-66-1
Muta. 2
yes
Details
202-051-6
91-22-5
Carc. 1B; Muta. 2
yes
Details
424-280-2
51594-55-9
Carc. 1B
yes
Details
A complex combination of hydrocarbons obtained as the raffinate from the UDEX extraction process on the catalytic reformer stream. It consists of saturated hydrocarbons having carbon numbers predominantly in the range of C6 through C9.
270-088-5
68410-71-9
Carc. 1B; Muta. 1B
yes
Details
The complex combination of hydrocarbons obtained as a raffinate from a Lurgi separation unit. It consists predominantly of non-aromatic hydrocarbons with various small amounts of aromatic hydrocarbons having carbon numbers predominantly in the range of C6 through C8.
270-349-3
68425-35-4
Carc. 1B; Muta. 1B
yes
Details
307-769-4
97722-19-5
Carc. 1A; Muta. 1B
yes
Details
-
-
Carc. 1B; Repr. 1B
yes
Details
-
-
Muta. 2
yes
Details
-
-
Carc. 1B; Muta. 1B
yes
Details
-
-
Carc. 1B; Muta. 2
yes
Details
-
-
Carc. 1B; Muta. 2
yes
Details
-
-
Carc. 1B; Muta. 2
yes
Details
show/hide
Zirconia Aluminosilicate Refractory Ceramic Fibres
are fibres covered by index number 650-017-00-8 in Annex VI, part 3, table 3.1 of Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, and fulfil the three following conditions: a) oxides of aluminium, silicon and zirconium are the main components present (in the fibres) within variable concentration ranges b) fibres have a length weighted geometric mean diameter less two standard geometric errors of 6 or less micrometres (µm). c) alkaline oxide and alkali earth oxide (Na2O+K2O+CaO+MgO+BaO) content less or equal to 18% by weight
EC / List no: - | CAS no: -
Aluminosilicate refractory ceramic fibres EC / List no: 604-314-4 | CAS no: 142844-00-6
Glass, oxide, chemicals
This category encompasses the various chemical substances manufactured in the production of inorganic glasses. For purposes of this category, 'glass' is defined as an amorfous, inorganic, transparent, translucent or opaque material traditionally formed by fusion of sources of silica with a flux, such as an alkali-metal carbonate, boron oxide, etc. and a stabilizer, into a mass which is cooled to a rigid condition without crystallization in the case of transparent or liquid-phase separated glass or with controlled crystallization in the case of glass-ceramics. The category consists of the various chemical substances, other than by-products or impurities, which are formed during the production of various glasses and concurrently incorporated into a glass mixture. All glasses contain one or more of these substances, but few, if any, contain all of them. The elements listed below are principally present as components of oxide systems but some may also be present as halides or chalcogenides, in multiple oxidation states, or in more complex compounds. Trace amounts of other oxides or chemical compounds may be present. Oxides of the first seven elements listed* comprise more than 95 percent, by weight, of the glass produced. @Aluminium*@Lead@Boron*@Lithium@Calcium*@Manganese@Magnesium*@Molybdenum@Potassium*@Neodymium@Silicon*@Nickel@Sodium*@Niobium@Antimony@Nitrogen@Arsenic@Phosphorus@Barium@Praseodymium@Bismuth@Rubidium@Cadmium@Selenium@Carbon@Silver@Cerium@Strontium@Cesium@Sulfur@Chromium@Tellurium@Cobalt@Tin@Copper@Titanium@Germanium@Tungsten@Gold@Uranium@Holmium@Vanadium@Iron@Zinc@Lanthanum@Zirconium
EC / List no: 266-046-0 | CAS no: 65997-17-3
Aluminosilicate Refractory Ceramic Fibres
are fibres covered by index number 650-017-00-8 in Annex VI, part 3, table 3.1 of Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, and fulfil the three following conditions: a) oxides of aluminium and silicon are the main components present (in the fibres) within variable concentration ranges b) fibres have a length weighted geometric mean diameter less two standard geometric errors of 6 or less micrometres (µm) c) alkaline oxide and alkali earth oxide (Na2O+K2O+CaO+MgO+BaO) content less or equal to 18% by weight
EC / List no: - | CAS no: -
-
-
Carc. 1B
yes
Details
A complex combination of hydrocarbons obtained by the treatment of solvent-dewaxed petroleum residual oils with activated charcoal for the removal of trace polar constituents and impurities.
309-710-8
100684-37-5
Carc. 1B
yes
Details
294-843-3
91770-57-9
Carc. 1B
yes
Details
A complex combination of hydrocarbons obtained by treatment of solvent-dewaxed petroleum residual oils with bleaching earth for the removal of trace polar constituents and impurities.
309-711-3
100684-38-6
Carc. 1B
yes
Details
A complex combination of hydrocarbons obtained by treatment of a residual oil with a natural or modified clay in either a contacting or percolation process to remove the trace amounts of polar compounds and impurities present. It consists of hydrocarbons having carbon numbers predominantly higher than C25 and boiling above approximately 400°C (752°F).
265-143-5
64742-41-2
Carc. 1B
yes
Details
A complex residuum from the atmospheric distillation of the butane-butylene stream. It consists of aliphatic hydrocarbons having carbon numbers predominantly in the range of C4 through C6.
270-795-9
68478-16-0
Carc. 1B; Muta. 1B
yes
Details
A complex combination of hydrocarbons produced by solvent removal of paraffins from the residue of the distillation of acid-treated, hydrocracked heavy paraffins and boiling approximately above 380°C (716°F).
295-499-7
92061-86-4
Carc. 1B
yes
Details
292-656-1
90669-74-2
Carc. 1B
yes
Details
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly greater than C25 and boiling above approximately 400°C (752°F).
265-160-8
64742-57-0
Carc. 1B
yes
Details
A complex combination of hydrocarbons obtained as the solvent soluble fraction from C3 - C4 solvent deasphalting of a residuum. It consists of hydrocarbons having carbon numbers predominantly higher than C25 and boiling above approximately 400°C (752°F).
265-096-0
64741-95-3
Carc. 1B
yes
Details
A complex combination of hydrocarbons obtained by removal of long, branched chain hydrocarbons from a residual oil by solvent crystallization. It consists of hydrocarbons having carbon numbers predominantly greater than C25 and boiling above approximately 400°C (752°F).
265-166-0
64742-62-7
Carc. 1B
yes
Details
A complex combination of hydrocarbons, sulfur compounds and metal-containing organic compounds obtained as the residue from refinery fractionation cracking processes. It produces a finished oil with a viscosity above 2cSt. at 100°C.
298-754-0
93821-66-0
Carc. 1B
yes
Details
A complex combination of hydrocarbons obtained as the solvent insoluble fraction from solvent refining of a residuum using a polar organic solvent such as phenol or furfural. It consists of hydrocarbons having carbon numbers predominantly higher than C25 and boiling above approximately 400°C (752°F).
265-101-6
64742-01-4
Carc. 1B
yes
Details
The residue from the fraction distillation of crude anthracene boiling in the approximate range of 340°C to 400°C (644°F to 752°F). It consists predominantly of tri- and polynuclear aromatic and heterocyclic hydrocarbons.
295-505-8
92061-92-2
Carc. 1B; Muta. 1B
yes
Details
The residue from the fractional distillation of wash oil boiling in the approximate range of 270°C to 330°C (518°F to 626°F). It consists predominantly of dinuclear aromatic and heterocyclic hydrocarbons.
295-506-3
92061-93-3
Carc. 1B
yes
Details

Export search results to:

Categories Display