Registration Dossier

Administrative data

First-aid measures

General advice: First Aid responders should pay attention to self-protection and use the recommended protective clothing (chemical resistant gloves, splash protection). If potential for exposure exists refer to specific personal protective equipment.
Inhalation: Move person to fresh air; if effects occur, consult a physician.

Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing. Seek medical attention if symptoms occur or irritation persists. Wash clothing before reuse. Discard items which cannot be decontaminated, including leather articles such as shoes, belts and watchbands. Suitable emergency safety shower facility should be immediately available.

Eye Contact: Wash immediately and continuously with flowing water for at least 30 minutes. Remove contact lenses after the first 5 minutes and continue washing. Obtain prompt medical consultation, preferably from an ophthalmologist. Suitable emergency eye wash facility should be immediately available.

Ingestion: Do not induce vomiting. Give one cup (8 ounces or 240 ml) of water or milk if available and transport to a medical facility. Do not give anything by mouth unless the person is fully conscious.

Fire-fighting measures

Water fog or fine spray. Dry chemical fire extinguishers. Carbon dioxide fire extinguishers. Foam. Alcohol resistant foams (ATC type) are preferred. General purpose synthetic foams (including AFFF) or protein foams may function, but will be less effective.

Extinguishing Media to Avoid: Do not use direct water stream. May spread fire.

Hazardous Combustion Products: During a fire, smoke may contain the original material in addition to combustion products of varying composition which may be toxic and/or irritating. Combustion products may include and are not limited to: Nitrogen oxides. Carbon monoxide. Carbon dioxide.
Unusual Fire and Explosion Hazards: Violent steam generation or eruption may occur upon application of direct water stream to hot liquids. Dense smoke is produced when product burns.

Fire Fighting Procedures: Keep people away. Isolate fire and deny unnecessary entry. Burning liquids may be extinguished by dilution with water. Do not use direct water stream. May spread fire. Burning liquids may be moved by flushing with water to protect personnel and minimize property damage.

Special Protective Equipment for Firefighters: Wear positive-pressure self-contained breathing apparatus (SCBA) and protective fire fighting clothing (includes fire fighting helmet, coat, trousers, boots, and gloves). Avoid contact with this material during fire fighting operations. If contact is likely, change to full chemical resistant fire fighting clothing with self-contained breathing apparatus. If this is not available, wear full chemical resistant clothing with self-contained breathing apparatus and fight fire from a remote location. For protective equipment in post-fire or non-fire clean-up situations, refer to the relevant sections.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Evacuate area. Only trained and properly protected personnel must be involved in clean-up operations. Keep upwind of spill. Ventilate area of leak or spill. Use appropriate safety equipment.

Environmental precautions: Prevent from entering into soil, ditches, sewers, waterways and/or groundwater.

Methods and materials for containment and cleaning up: Contain spilled material if possible. Absorb with materials such as: Sand. Collect in suitable and properly labeled containers.

Handling and storage

General Handling: Do not get in eyes, on skin, on clothing. Avoid breathing vapor. Do not swallow. Avoid prolonged or repeated contact with skin. Keep container closed. Use with adequate ventilation. Wash thoroughly after handling. Spills of these organic materials on hot fibrous insulations may lead to lowering of the autoignition temperatures possibly resulting in spontaneous combustion.

Other Precautions: Spills of these organic materials on hot fibrous insulations may lead to lowering of the autoignition temperatures possibly resulting in spontaneous combustion.

Storage: Store in a cool, dry place.

Transport information

Land transport (ADR/RID)

UN number:
3267
Proper shipping name and description:
CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S.
Chemical name:
1,3-Benzenedimethanamine; Trimethyl-1,6-hexanediamine
Class:
8
Classification code:
C7
Packaging group:
II
Labels:
C-Corrosive.
N-Dangerous for the environment.
Remarks:
Tremcard Number: 80CG7-II+III

Inland waterway transport (ADN(R))

UN number:
3267
Proper shipping name and description:
CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S.
Chemical name:
1,3-Benzenedimethanamine; Trimethyl-1,6-hexanediamine
Class:
8
Classification code:
C7
Packaging group:
II
Labels:
C-Corrosive.
N-Dangerous for the environment.
Remarks
Tremcard Number: 80CG7-II+III

Marine transport (IMDG)

UN number:
3267
Proper shipping name and description:
CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S.
Technical Name: 1,3-Benzenedimethanamine; Trimethyl-1,6-hexanediamine
Chemical name:
1,3-Benzenedimethanamine; Trimethyl-1,6-hexanediamine
Class:
8
Packaging group:
II
EmS code:
F-A,S-B
Labels:
C-Corrosive.
N-Dangerous for the environment.
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
3267
Proper shipping name and description:
CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S.
Chemical name:
1,3-Benzenedimethanamine; Trimethyl-1,6-hexanediamine
Class:
8
Packaging group:
II
Labels:
C-Corrosive.
N-Dangerous for the environment.
Remarks
Cargo Packing Instruction: 855
Passenger Packing Instruction: 851
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal Protection
Eye/Face Protection: Use chemical goggles. Chemical goggles should be consistent with EN 166 or equivalent. If exposure causes eye discomfort, use a full-face respirator.

Skin Protection: Use protective clothing chemically resistant to this material. Selection of specific items such as face shield, boots, apron, or full body suit will depend on the task.

Hand protection: Use chemical resistant gloves classified under Standard EN374: Protective gloves against chemicals and micro-organisms. Examples of preferred glove barrier materials include: Butyl rubber. Chlorinated polyethylene. Neoprene. Polyethylene. Ethyl vinyl alcohol laminate (“EVAL”). Polyvinyl chloride (“PVC” or “vinyl”). Styrene/butadiene rubber. Viton. Examples of acceptable glove barrier materials include: Natural rubber (“latex”). Nitrile/butadiene rubber (“nitrile” or “NBR”). Polyvinyl alcohol (“PVA”). When prolonged or frequently repeated contact may occur, a glove with a protection class of 5 or higher (breakthrough time greater than 240 minutes according to EN 374) is recommended. When only brief contact is expected, a glove with a protection class of 3 or higher (breakthrough time greater than 60 minutes according to EN 374) is recommended. NOTICE: The selection of a specific glove for a particular application and duration of use in a workplace should also take into account all relevant workplace factors such as, but not limited to: Other chemicals which may be handled, physical requirements (cut/puncture protection, dexterity, thermal protection), potential body reactions to glove materials, as well as the instructions/specifications provided by the glove supplier.

Respiratory Protection: Respiratory protection should be worn when there is a potential to exceed the exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, wear respiratory protection when adverse effects, such as respiratory irritation or discomfort have been experienced, or where indicated by your risk assessment process. For most conditions, no respiratory protection should be needed; however, if handling at elevated temperatures without sufficient ventilation, use an approved air-purifying respirator. Use the following CE approved air-purifying respirator: Organic vapor cartridge with a particulate pre-filter, type AP2.

Ingestion: Avoid ingestion of even very small amounts; do not consume or store food or tobacco in the work area; wash hands and face before smoking or eating.

Engineering Controls
Ventilation: Use local exhaust ventilation, or other engineering controls to maintain airborne levels below exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, general ventilation should be sufficient for most operations. Local exhaust ventilation may be necessary for some operations.

Stability and reactivity

No dangerous reaction known under conditions of normal use.
Stable under recommended storage conditions.
Polymerization will not occur.

Conditions to Avoid: Exposure to elevated temperatures can cause product to decompose.
Incompatible Materials: Avoid contact with: Acids. Halogenated hydrocarbons. Oxidizers.

Decomposition products depend upon temperature, air supply and the presence of other materials. Decomposition products can include and are not limited to: Aromatic compounds. Amines. Hydrocarbons. Phenolics.

Disposal considerations

This product, when being disposed of in its unused and uncontaminated state should be treated as a hazardous waste according to EC Directive 2008/98/EC. Any disposal practices must be in compliance with all national and provincial laws and any municipal or local by-laws governing hazardous waste. For used, contaminated and residual materials additional evaluations may be required. Do not dump into any sewers, on the ground, or into any body of water.