Registration Dossier

Diss Factsheets

Toxicological information

Skin irritation / corrosion

Currently viewing:

Administrative data

Endpoint:
skin irritation: in vitro / ex vivo
Type of information:
experimental study
Adequacy of study:
key study
Study period:
Testing was conducted between 03 September and 09 September 2013.
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: The study is considered to be reliability 1 as it has been conducted according to OECD Test Guideline 439 using the EPISKIN™ Reconstructed Human Epidermis Model and in compliance with GLP.

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2013

Materials and methods

Test guideline
Qualifier:
according to guideline
Guideline:
OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
Deviations:
yes
Remarks:
Refer to principles of method if other than guideline
Principles of method if other than guideline:
Deviations from Study Plan:

Deviation No.1 (03 October 2013) Section 4.1 Direct MTT reduction.
An assessment found the test item was able to directly reduce MTT. Therefore an additional
procedure using water-killed tissues was performed during the determination of skin irritation
potential. However the results obtained showed a negligible degree of interference due to direct
reduction of MTT occurred. It was therefore considered unnecessary to use the results of the
water-killed tissues for quantitative correction of results or for reporting purposes.

Deviation No.2 (03 October 2013)
The control group’s for this study were shared with study 41302525.
The control groups raw data will be filed with study 41302525.
This deviation was considered not to affect the purpose or integrity of the study.
GLP compliance:
yes (incl. QA statement)

Test material

Constituent 1
Chemical structure
Reference substance name:
Reaction mass of (5R)-octahydro-1H-4,7-methanoinden-5-ylacetaldehyde and (5S)-octahydro-1H-4,7-methanoinden-5-ylacetaldehyde
EC Number:
940-300-7
Cas Number:
1339119-15-1
Molecular formula:
C12H18O
IUPAC Name:
Reaction mass of (5R)-octahydro-1H-4,7-methanoinden-5-ylacetaldehyde and (5S)-octahydro-1H-4,7-methanoinden-5-ylacetaldehyde
Test material form:
other: liquid
Details on test material:
Identification: IFF TM 11-213
Storage Conditions: room temperature in the dark

Test animals

Species:
other: EPIKSIN in vitro Reconstructed Human Epidermis (RHE) Model
Strain:
other: Not applicable
Details on test animals or test system and environmental conditions:
EPISKIN™ Reconstructed Human Epidermis Model Kit
Supplier : SkinEthic Laboratories, Lyon, France
Date received : 03 September 2013
EpiSkinTM Tissues (0.38cm2) lot number : 13-EKIN-030
Maintenance Medium lot number : 13-MAIN3-037
Assay Medium lot number : 13-ESSC-031

Test system

Type of coverage:
other: Not applicable
Preparation of test site:
other: Not applicable
Vehicle:
unchanged (no vehicle)
Controls:
other: Not applicable
Duration of treatment / exposure:
15-Minute exposure period and 42 hours post-exposure incubation period.
Observation period:
Not applicable
Number of animals:
Not applicable
Details on study design:
PRE-TEST PROCEDURE:
Assessment of Direct Test Item Reduction of MTT:
MTT Salt Metabolism, Cell Viability Assay:

The MTT assay, a colorimetric method of determining cell viability, is based on reduction of the yellow tetrazolium salt (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl-tetrazolium bromide) to a blue formazan salt by mitochondrial succinate dehydrogenase in viable cells.

One limitation of the assay is possible interference of the test item with MTT. A test item may directly reduce MTT, thus mimicking dehydrogenase activity of thecellular mitochondria. This property of the test item is only a problem, if at the time of the MTT test (after rinsing) there are still sufficient amounts of the test item present on or in the tissues. In this case, the true metabolic MTT reduction and the false direct MTT reduction can be differentiated and quantified.

Test for Direct MTT Reduction:
As specified, a test item may interfere with the MTT endpoint, if it is able to directly reduce MTT and at the same time is present on or in the tissues when the MTT viability test is performed. To identify this possible interference, each test item is checked for the ability to directly reduce MTT according to the following procedure:

10 μL of the test item was added to 2 mL of a 0.3 mg/mL MTT solution freshly prepared in assay medium. The solution was incubated in the dark at 37 °C, 5% CO2 in air for 3 hours.
Untreated MTT solution was used as a control.

If the MTT solution containing the test item turns blue, the test item is presumed to have reduced the MTT and the determination of skin irritation potential would be performed in parallel on viable and water-killed tissues for quantitative correction of the results.

The test item was shown to directly reduce MTT in the direct MTT reduction test. There was a possibility that if the test item could not be totally rinsed off the tissues, any residual test item present on or in the tissue may directly reduce MTT and could have given rise to a false negative result. Therefore, the determination of skin irritation potential was performed in parallel on viable and water-killed tissues.

This step was a functional check which employs water-killed tissues that possess no metabolic activity but absorb and bind the test substance like viable tissues. Water-killed tissues were prepared by placing untreated EPISKINTM tissues in a 12-well plate containing 2.0 mL of sterile distilled water in each well. The tissues were incubated at 37 °C, 5% CO2 in air for 48 ± 1 hours. At the end of the incubation the water was discarded. Once killed the tissues were stored in a freezer (-14 to -30 °C) for up to 6 months. Before use each tissue was thawed by placing in 2.0 mL of maintenance medium for approximately 1 hour at room temperature.

In addition to the normal test procedure, each MTT reducing test substance was applied to a water-killed tissue. In addition, one water-killed tissue remained untreated. The untreated water-killed control showed a small amount of MTT reduction due to residual reducing enzymes within the killed tissue.


PRE-INCUBATION (DAY 0: TISSUE ARRIVAL):
Before removal from the transport plate each tissue was inspected for any air bubbles between the agarosegel and the insert:

Tissues Satisfactory : Yes
Temperature Indicator Color Satisfactory : Yes
Agar Medium Color Satisfactory : Yes

2.0 mL of maintenance medium, warmed to approximately 37 °C, was pipetted into the first column of three wells of a pre-labeled 12-well plate. Each epidermis unit was transferred into the maintenance medium filled wells (3 units per plate). A different 12-well plate was used for the test item and each control item. The tissues were incubated at 37 °C, 5% CO2 in air overnight.

MAIN TEST:
APPLICATION OF TEST ITEM AND RINSING (DAY 2):
2.0 mL of maintenance medium, warmed to approximately 37 °C, was pipetted into the second column of 3 wells of the 12-well plate.

Triplicate tissues were treated with the test item for an exposure period of 15 minutes. The test item was applied topically to the corresponding tissues ensuring uniform covering. 10 μL of the test item was applied to the epidermis surface. Triplicate tissues treated with 10 μL of DPBS served as the negative controls and triplicate tissues treated with 10 μL of SDS 5% w/v served as the positive controls. To ensure satisfactory contact with the positive control item the SDS solution was spread over the entire surface of the epidermis using a pipette tip (taking particular care to cover the centre). After 7-Minutes contact time the SDS solution was re-spread with a
pipette tip to maintain the distribution of the SDS for the remainder of the contact period. The plate(s) were kept in the biological safety cabinet at room temperature for 15 minutes.

At the end of the exposure period, each tissue was removed from the well using forceps and rinsed using a wash bottle containing DPBS with Ca++ and Mg++. Rinsing was achieved by filling and emptying each tissue insert for approximately 40 seconds using a constant soft stream of DPBS to gently remove any residual test item. Residual test item remained on the tissues after rinsing. The rinsed tissues were transferred to the second column of 3 wells containing 2.0 mL of maintenance medium in each well. The rinsed tissues were incubated at 37 °C, 5% CO2 in air for 42 hours.


MTT LOADING/FORMAZAN EXTRACTION (DAY 3):
Following the 42-Hour post-exposure incubation period each 12-well plate was placed onto a plate shaker for 15 minutes to homogenize the released mediators in the maintenance medium. 1.6 mL of the maintenance medium from beneath each tissue was transferred to pre-labeled micro tubes and stored in a freezer at -14 to -30 ºC for possible inflammatory mediator determination.

2.0 mL of a 0.3 mg/mL MTT solution, freshly prepared in assay medium, was pipetted into the third column of 3 wells of the 12 well plate(s). The tissues were transferred to the MTT filled wells, being careful to remove any excess maintenance medium from the bottom of the tissue insert by blotting on absorbent paper. The tissues were incubated for 3 hours at 37 °C, 5% CO2 in air. At the end of the 3-Hour incubation period each tissue was placed onto absorbent paper to dry.

A total biopsy of the epidermis was made using the EPISKINTM biopsy punch. The epidermis was carefully separated from the collagen matrix using forceps and both parts (epidermis and collagen matrix) placed into labeled 1.5 mL micro tubes containing 500 μL of acidified isopropanol, ensuring that both the epidermis and collagen matrix were fully immersed. Each tube was plugged to prevent evaporation and mixed thoroughly on a vortex mixer. The tubes were refrigerated at 1 to 10 °C until Day 6 of the experiment, allowing the extraction of formazan crystals out of the MTT-loaded tissues.

ABSORBANCE/OPTICAL DENSITY MEASUREMENTS (DAY 6):
At the end of the formazan extraction period each tube was mixed thoroughly on a vortex mixer to produce a homogenous colored solution. For each tissue, duplicate 200 μL samples were transferred to the appropriate wells of a pre-labeled 96-well plate. 200 μL of acidified isopropanol alone was added to the two wells designated as ‘blanks’. The optical density was measured (quantitative viability analysis) at
562 nm (without a reference filter) using the Anthos 2001 microplate reader.

Results and discussion

In vitro

Results
Irritation / corrosion parameter:
other: other: relative mean viability
Value:
12.5
Remarks on result:
other:
Remarks:
Basis: mean. Time point: 42 minutes. Remarks: Irritating to Skin . (migrated information)

Any other information on results incl. tables

Direct MTT Reduction

An assessment found the test item was able to directly reduce MTT. Therefore, an additional procedure using water-killed tissues was performed during the determination of skin irritation potential. However, the results obtained showed no degree of interference due to direct

reduction of MTT occurred. It was therefore considered unnecessary to use the results of the water-killed tissues for quantitative correction of results or for reporting purposes.

 

Test Item, Positive Control Item and Negative Control Item

The relative mean viability of the test item treated tissues was 12.5 % after a 15-Minute exposure period and 42 hours post-exposure incubation period. It was considered unnecessary to perform IL-1a analysis as the results of the MTT test were unequivocal.

 

Quality Criteria

The relative mean tissue viability for the positive control treated tissues was 8.0% relative to the negative control treated tissues and the standard deviation value of the percentage viability was 1.0 %. The positive control acceptance criterion was therefore satisfied.

The mean OD562for the negative control treated tissues was 0.863 and the standard deviation value of the percentage viability was 9.8 %. The negative control acceptance criterion was therefore satisfied. The standard deviation calculated from individual percentage tissue viabilities of the three identically treated test item tissues was 4.0 %. The test item acceptance criterion was therefore satisfied.

Mean OD562 Values and Percentage Viabilities for the Negative Control Item, Positive Control Item and Test Item

Item

OD562 of

tissues

Mean OD562

of triplicate

tissues

± SD of

OD562

Relative

individual

tissue

viability (%)

Relative

mean

viability (%)

± SD of

Relative

mean

viability (%)

Negative

Control Item

0.797

0.863

0.084

92.4

100*

9.8

0.958

111.0

0.834

96.6

Positive Control Item

0.069

0.069

0.009

8.0

8.0

1.0

0.061

7.1

0.078

9.0

Test Item

0.146

0.108

0.034

16.9

12.5

4.0

0.099

11.5

0.079

9.2

SD = Standard deviation

*The mean viability of the negative control tissues is set at 100 %

Applicant's summary and conclusion

Interpretation of results:
Category 2 (irritant)
Remarks:
Migrated information Cause skin irritation Criteria used for interpretation of results: EU
Conclusions:
The test item, TM 11-213, was classified as irritant. The following classification criteria apply:
EU CLP and UN GHS Hazard statement H315 “Causes Skin Irritation” Category 2.
EU DSD (67/548/EEC) Irritant requires symbol “Xi” risk phrase R38 “Irritating to Skin”.
Executive summary:

The skin irritancy of the test substance, TM 11-213 was determined according to OECD Guideline 439 using the EPISKIN™ Reconstructed Human Epidermis Model. The relative mean viability of the test item treated tissues was 12.5 % after a 15-Minute exposure period and 42 hours post-exposure incubation period. This results shows that the substance is a skin irritant.