Registration Dossier

Administrative data

First-aid measures

General information:Remove soiled or soaked clothing immediatelyAfter inhalation:If inhaled, remove to fresh air. Get medical advice/ attention.After contact with skin:In case of contact, immediately flush skin with soap and plenty of water.Get medical attention immediately.After contact with eyes:Get medical attention immediately.After ingestion:If swallowed, seek medical advice immediately and show this container or label.Do NOT induce vomiting.

Fire-fighting measures

Suitable extinguishing media:water spray jet alcohol-resistant foam carbon dioxide dry powder In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO), Nitrous gases (NOx) Special protective equipment for firefighting:Use self-contained breathing apparatus Further information:Wear protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:Ensure adequate ventilation.Wear suitable personal protective equipment.Keep away sources of ignition.Environmental precautions:Do not allow to enter drains or waterways. Methods and material for containment and cleaning up:Pick up with absorbent material (eg sand, sawdust). Rinse away rest with water.

Handling and storage

Advice on safe handling:Provide good ventilation of working area (local exhaust ventilation if necessary). Open and handle container with care. Hygiene measures:Wash hands before breaks and at the end of workday.Use protective skin cream before handling the product.Take off immediately all contaminated clothing and wash it before reuse.Advice on protection against fire and explosion:Take precautionary measures against build-up of electrostatic charges, e.g earthing during loading and off-loading operations. Keep away from sources of ignition - refrain from smoking. Further information on storage conditions:Protect from heat and direct sunlight - sensitive to frost - In case of the product becoming opaque, thickening or being frozen due to the effects of cold, allow to thaw slowly at room temperature. Stir briefly before use.

Transport information

Land transport (ADR/RID)

UN number:
2924
Proper shipping name and description:
FLAMMABLE LIQUID,CORROSIVE, N.O.S.(Cocospropylenediamine compounds, Isopropanol (Isopropyl alcohol))
Class:
3
Classification code:
FC
Packaging group:
IIII
Labels:
Flammable liquid No. 3Corrosive substance No. 8
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
2924
Proper shipping name and description:
FLAMMABLE LIQUID,CORROSIVE, N.O.S.(Cocospropylenediamine compounds, Isopropanol (Isopropyl alcohol))
Class:
3
Classification code:
FC
Packaging group:
III
Labels:
Flammable liquid No. 3Corrosive substance No. 8
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2924
Proper shipping name and description:
FLAMMABLE LIQUID,CORROSIVE, N.O.S.(Cocospropylenediamine compounds, Isopropanol (Isopropyl alcohol))
Class:
3
Packaging group:
III
EmS code:
F-E, S-C
Labels:
Flammable liquid No. 3Corrosive substance No. 8
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
2924
Proper shipping name and description:
FLAMMABLE LIQUID,CORROSIVE, N.O.S.(Cocospropylenediamine compounds, Isopropanol (Isopropyl alcohol))
Class:
3
Packaging group:
III
Labels:
Flammable liquid No. 3Corrosive substance No. 8
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective measures:Avoid contact with skinDo not inhale vapoursAvoid contact with eyesRespiratory protection :Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposureFull mask to standard DIN EN 136Filter A (organic gases and vapours) to standard DIN EN 141The use of filter apparatus presupposes that the environment atmosphere contains at least 17% oxygen by volume, and does not exceed the maximum gas concentration, usually 0.5% by volume. Relevant guidelines to be considered include EN 136/141/143/371/372 as well as other national regulations.Hand protection :For long-term exposure:Impervious butyl rubber glovesMinimum breakthrough time / gloves : 480 minMinimum thickness / gloves 0,7 mmFor short-term exposure (splash protection):Nitrile rubber gloves.Minimum breakthrough time / gloves : 30 minMinimum thickness / gloves 0,4 mmThese types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.Eye protection :Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)Body protection :Depending on the degree of hazard, when handling corrosive substances, aprons, boots or full protective clothing made of suitable materials (e.g.rubberized or PVC-coated) must also be worn.

Stability and reactivity

Reactivity:No dangerous reaction known under conditions of normal use.Chemical stability:Under normal conditions the product is stable.Possibility of hazardous reactions:When handled and stored appropriately no dangerous reactions are known.Conditions to avoid:None known.Incompatible materials:Not known.Hazardous decomposition products:When handled and stored appropriately, no dangerous decomposition products are known.

Disposal considerations

Waste treatment methods:Product:In accordance with local authority regulations, take to special waste incineration plant.Uncleaned packaging:Packaging that cannot be cleaned should be disposed of as product waste.