Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical
advice/attention if you feel unwell.
Skin contact: Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or
rash occurs: Get medical advice/attention.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing. If eye irritation persists: Get medical advice/attention.
Ingestion: Get medical advice/attention if you feel unwell. Rinse mouth.
Protection of first-aiders: A rescuer should wear personal protective equipment, such as rubber gloves and air-tight goggles.

Fire-fighting measures

Suitable extinguishing media: Dry chemical, foam, water spray, carbon dioxide.
Specific hazards: Take care as it may decompose upon combustion or in high temperatures to generate poisonous fume.
Specific methods: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to
the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in
the surroundings: Remove movable containers if safe to do so.
Special protective equipment for
firefighters:
When extinguishing fire, be sure to wear personal protective equipment.

Accidental release measures

6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective
equipment and emergency procedures:
Use personal protective equipment. Keep people away from and upwind of spill/leak. Entry to non-involved
personnel should be controlled around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for containment
and cleaning up:
Sweep dust to collect it into an airtight container, taking care not to disperse it. Adhered or collected
material should be promptly disposed of, in accordance with appropriate laws and regulations.

Handling and storage

Handling
Technical measures: Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent dispersion of
dust. Wash hands and face thoroughly after handling.
Use a local exhaust if dust or aerosol will be generated.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
Storage
Storage conditions: Keep container tightly closed. Store in a cool and dark place.
Store away from incompatible materials such as oxidizing agents.
Packaging material: Law is followed.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering controls: Install a closed system or local exhaust as possible so that workers should not be exposed directly. Also
install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Dust respirator. Follow local and national regulations.
Hand protection: Protective gloves.
Eye protection: Safety glasses. A face-shield, if the situation requires.
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Stability and reactivity

Stability: Stable under proper conditions.
Reactivity: No special reactivity has been reported.
Incompatible materials: oxidizing agents
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Sulphur oxides

Disposal considerations

Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a combustible solvent and
burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance.