Registration Dossier

Administrative data

First-aid measures

General advice
If symptoms persist, call a physician

Eye contact
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a physician
If eye irritation persists, consult a specialist.

Skin contact
Remove contaminated clothing and shoes
Wash off with soap and water

Blow nose.
Move to fresh air

Do NOT induce vomiting.
If swallowed, do not induce vomiting - seek medical advice.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media
Cool containers / tanks with water spray, dry chemical, foam, carbon dioxide (CO 2), use CO2, dry chemical, or foam.

Extinguishing media which must not be used for safety reasons
Do not use a solid water stream as it may scatter and spread fire.

Special hazards arising from the substance or mixture

Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases
In the event of fire and/or explosion do not breathe fumes.
During processing, dust may form explosive mixture in air.
Thermal decomposition can lead to release of irritating gases and vapours.
Dust may form explosive mixture in air.

Precautions for fire-fighters

Special protective equipment for fire-fighters.
Wear self-contained breathing apparatus and protective suit.

Other information
Cool containers / tanks with water spray.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Personal precautions
Remove all sources of ignition.
Heat, flames and sparks.
Ensure adequate ventilation.
Use personal protective equipment.
Do not breathe vapours/dust.
Avoid contact with the skin and the eyes.

Environmental precautions

Environmental precautions
The product should not be allowed to enter drains, water courses or the soil.
Should not be released into the environment.
Do not allow material to contaminate ground water system.
Local authorities should be advised if significant spillages cannot be contained.
Try to prevent the material from entering drains or water courses.

Methods and materials for containment and cleaning up

Methods for cleaning up
Contain spillage, and then collect with non-combustable absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations.
Prevent dust cloud.
Use low-sparking hand tools and explosion-proof electrical equipment.
Keep in suitable, closed containers for disposal.

Handling and storage

Precautions for safe handling

Precautions for safe handling
Avoid creating dust.
Use only in area provided with appropriate exhaust ventilation.
Wear personal protective equipment.
Do not eat, drink or smoke when using this product.
Avoid contact with skin and eyes.
Provide appropriate exhaust ventilation at places where dust is formed.
Wear a dust mask.
Ensure that eyewash stations and safety showers are close to the workstation location.

Prevention of fire and explosion
Avoid static electricity build up with connection to earth.

Hygiene measures
Do not breathe dust.
When using, do not eat, drink or smok;
Wear suitable gloves and eye/face protection.
Wash hands before breaks and immediately after handling the product.

Conditions for safe storage, including any incompatibilities

Technical measures/Storage conditions
Keep tightly closed in a dry and cool place.
Store in original container.
Keep in properly labelled containers.
Keep away from heat and sources of ignition.
Ensure all equipment is electrically grounded before beginning transfer operations.

Materials to avoid
Strong oxidizing agents.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Occupational exposure limits: Inhalable dust : 10mg/m3 (8h).

Exposure controls

Engineering measures: When working in confined spaces (tanks, containers, etc.), ensure that there is a supply of air suitable for breathing and wear the recommended equipment.

General information: Use personal protective equipment.
Respiratory protection: Respirator must be worn if exposed to dust. In case of insufficient ventilation wear suitable respiratory equipment.
Eye protection: Safety glasses with side-shields
Skin and body protection: Wear suitable protective clothing. Protective shoes or boots.
Hand protection: Protective gloves

Environmental exposure controls
The product should not be allowed to enter drains, water courses or the soil.

Stability and reactivity


Chemical stability
Stable under recommended storage conditions.

Possibility of hazardous reactions
Conditions to avoid
Heat, flames and sparks
Take precautionary measures against static charges.

Incompatible materials
Materials to avoid
Strong oxidizing agents

Hazardous decomposition products
Hazardous decomposition products formed under fire conditions

Disposal considerations

Waste treatment methods

Waste from residues/Unused products
Dispose of in accordance with the European Directives on waste and hazardous waste.
Should not be released into the environment.

Contaminated packaging
Empty containers should be taken to an approved waste handling site for recycling or disposal.

Other information
According to the European Waste Catalogue, Waste Codes are not product specific, but application specific.
Waste codes should be assigned by the user based on the application for which the product was used.