Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 201-153-8 | CAS number: 78-88-6
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
- General advice:
Move out of dangerous area. Place and transport victim in stable position (lying sideways). Remove contaminated clothing immediately and dispose ofsafely.
- After inhalation:
Keep patient warm and at rest. Move to fresh air. Call a physician or poison control center immediately.
- After skin contact:
Wash off immediately with soap and plenty of water. Wash off with soap and water.
- After eye contact:
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Call a physician or poison control center immediately.
- After swallowing:
Do NOT induce vomiting. Call a physician or poison control center immediately. Rinse mouth.
Move out of dangerous area. Place and transport victim in stable position (lying sideways). Remove contaminated clothing immediately and dispose ofsafely.
- After inhalation:
Keep patient warm and at rest. Move to fresh air. Call a physician or poison control center immediately.
- After skin contact:
Wash off immediately with soap and plenty of water. Wash off with soap and water.
- After eye contact:
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Call a physician or poison control center immediately.
- After swallowing:
Do NOT induce vomiting. Call a physician or poison control center immediately. Rinse mouth.
Fire-fighting measures
- Suitable extinguishing agents:
Water spray
Carbon dioxide (CO2)
Foam
Sand
- Special hazards caused by the material, its products of combustion or resulting gases:
In the event of fire the following can be released:
Hydrogen chloride (HCl)
Carbon monoxide (CO)
- Protective equipment:
In the event of fire and/or explosion do not breathe fumes.
In the event of fire, wear self-contained breathing apparatus.
- Additional information:
Contain the spread of the fire-fighting media.
Do not allow run-off from fire fighting to enter drains or water courses.
Water spray
Carbon dioxide (CO2)
Foam
Sand
- Special hazards caused by the material, its products of combustion or resulting gases:
In the event of fire the following can be released:
Hydrogen chloride (HCl)
Carbon monoxide (CO)
- Protective equipment:
In the event of fire and/or explosion do not breathe fumes.
In the event of fire, wear self-contained breathing apparatus.
- Additional information:
Contain the spread of the fire-fighting media.
Do not allow run-off from fire fighting to enter drains or water courses.
Accidental release measures
- Person-related safety precautions:
Avoid contact with spilled product or contaminated surfaces.
Use personal protective equipment.
Remove all sources of ignition.
- Measures for environmental protection:
Do not allow to get into surface water, drains and ground water.
- Measures for cleaning/collecting:
Clean contaminated floors and objects thoroughly, observing environmental regulations.
Keep in suitable, closed containers for disposal.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder).
Avoid contact with spilled product or contaminated surfaces.
Use personal protective equipment.
Remove all sources of ignition.
- Measures for environmental protection:
Do not allow to get into surface water, drains and ground water.
- Measures for cleaning/collecting:
Clean contaminated floors and objects thoroughly, observing environmental regulations.
Keep in suitable, closed containers for disposal.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder).
Handling and storage
This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.
Personal precautions while handling the product:
- respiratory protection:
If product is handled while not enclosed, and if contact may occur:
Wear respirator with an organic vapours and gas filter mask
(protection factor 10) conforming to EN140 type A or equivalent.
- hand/skin/body protection:
Solvent-resistant gloves.
Wear standard coverall and type 3 suit.
Wear two layers of clothing wherever possible. Polyester/cotton or
cotton overalls should be worn under chemical protection suit and
should be professionally laundered frequently.
- eye protection:
Wear goggles conforming to EN166 (Field of Use 5 or equivalent).
- Hygene measures:
Avoid contact with skin, eyes and clothing.
Keep working clothes separately.
Wash hands immediately after work, if necessary take a shower.
Remove soiled clothing immediately and clean thoroughly before using again.
Garments that cannot be cleaned must be destroyed (burnt).
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.
Personal precautions while handling the product:
- respiratory protection:
If product is handled while not enclosed, and if contact may occur:
Wear respirator with an organic vapours and gas filter mask
(protection factor 10) conforming to EN140 type A or equivalent.
- hand/skin/body protection:
Solvent-resistant gloves.
Wear standard coverall and type 3 suit.
Wear two layers of clothing wherever possible. Polyester/cotton or
cotton overalls should be worn under chemical protection suit and
should be professionally laundered frequently.
- eye protection:
Wear goggles conforming to EN166 (Field of Use 5 or equivalent).
- Hygene measures:
Avoid contact with skin, eyes and clothing.
Keep working clothes separately.
Wash hands immediately after work, if necessary take a shower.
Remove soiled clothing immediately and clean thoroughly before using again.
Garments that cannot be cleaned must be destroyed (burnt).
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- 2047
Shipping information
- Proper shipping name and description:
- DICHLOROPROPENES
- Chemical name:
- 2,3-Dichloropropene
- Language:
- English
- Labels:
- 3
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- 2047
Shipping information
- Proper shipping name and description:
- DICHLOROPROPENES
- Chemical name:
- 2,3-Dichloropropene
- Language:
- English
- Labels:
- 3
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- 2047
Shipping information
- Proper shipping name and description:
- DICHLOROPROPENES
- Chemical name:
- 2,3-Dichloropropene
- Labels:
- 3
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- 2047
Shipping information
- Proper shipping name and description:
- DICHLOROPROPENES
- Chemical name:
- 2,3-Dichloropropene
- Labels:
- 3
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.
- Advice on safe handling:
Use only in area provided with appropriate exhaust ventilation.
- Advice on protection against fire and explosion:
Keep away from heat and sources of ignition.
Take measures to prevent the build up of electrostatic charge.
Personal precautions while handling the product:
- respiratory protection:
If product is handled while not enclosed, and if contact may occur:
Wear respirator with an organic vapours and gas filter mask
(protection factor 10) conforming to EN140 type A or equivalent.
- hand/skin/body protection:
Solvent-resistant gloves.
Wear standard coverall and type 3 suit.
Wear two layers of clothing wherever possible. Polyester/cotton or cotton overalls should be worn under chemical protection suit and should be professionally laundered frequently.
- eye protection:
Wear goggles conforming to EN166 (Field of Use 5 or equivalent).
- Hygene measures:
Avoid contact with skin, eyes and clothing.
Keep working clothes separately.
Wash hands immediately after work, if necessary take a shower.
Remove soiled clothing immediately and clean thoroughly before using again.
Garments that cannot be cleaned must be destroyed (burnt).
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.
- Advice on safe handling:
Use only in area provided with appropriate exhaust ventilation.
- Advice on protection against fire and explosion:
Keep away from heat and sources of ignition.
Take measures to prevent the build up of electrostatic charge.
Personal precautions while handling the product:
- respiratory protection:
If product is handled while not enclosed, and if contact may occur:
Wear respirator with an organic vapours and gas filter mask
(protection factor 10) conforming to EN140 type A or equivalent.
- hand/skin/body protection:
Solvent-resistant gloves.
Wear standard coverall and type 3 suit.
Wear two layers of clothing wherever possible. Polyester/cotton or cotton overalls should be worn under chemical protection suit and should be professionally laundered frequently.
- eye protection:
Wear goggles conforming to EN166 (Field of Use 5 or equivalent).
- Hygene measures:
Avoid contact with skin, eyes and clothing.
Keep working clothes separately.
Wash hands immediately after work, if necessary take a shower.
Remove soiled clothing immediately and clean thoroughly before using again.
Garments that cannot be cleaned must be destroyed (burnt).
Stability and reactivity
- Materials to avoid:
Aluminium
Alkaline earth metals
Zinc
Oxidizing agents
Acids
Bases
Aluminium
Alkaline earth metals
Zinc
Oxidizing agents
Acids
Bases
Disposal considerations
During the whole life cycle of the substance all necessary measures in accordance to
art. 18(4) of (EC) 1907/2006 are undertaken. The substance is handled under strictly
controlled conditions.
art. 18(4) of (EC) 1907/2006 are undertaken. The substance is handled under strictly
controlled conditions.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Route: .live1