Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
Immediately remove contaminated clothing.

If inhaled:
Keep patient calm, remove to fresh air, seek medical attention.

On skin contact:
Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.

On contact with eyes:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.

On ingestion:
Immediately rinse mouth and then drink plenty of water, do not induce vomiting, seek medical attention.


Most important symptoms and effects, both acute and delayed
Hazards: When inhaled (e.g. during vomiting) risk of pulmonary oedema and/or pneumonia.


Indication of any immediate medical attention and special treatment needed
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
dry powder, foam, carbon dioxide, water spray

Unsuitable extinguishing media for safety reasons:
water jet

Special hazards arising from the substance or mixture
harmful vapours
Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.

Advice for fire-fighters
Special protective equipment:
Wear a self-contained breathing apparatus.

Further information:
The degree of risk is governed by the burning substance and the fire conditions. Contaminated extinguishing water must be disposed of in accordance with official regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Use personal protective clothing. Information regarding personal protective measures see, chapter 8.

Environmental precautions
Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.

Methods and material for containment and cleaning up
For large amounts: Pump off product.
For residues: Pick up with suitable absorbent material. Dispose of absorbed material in accordance with regulations.

Reference to other sections
Information regarding exposure controls/personal protection and disposal considerations can be found in section 8 and 13.

Handling and storage

Precautions for safe handling
No special measures necessary provided product is used correctly.

Protection against fire and explosion:
Take precautionary measures against static discharges.

Conditions for safe storage, including any incompatibilities
Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.

Specific end use(s)
For the relevant identified use(s) listed in Section 1 the advice mentioned in this section 7 is to be observed.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Land transport

ADR
Hazard class: 8
Packing group: III
ID number: UN 1760
Hazard label: 8, EHSM
Proper shipping name: CORROSIVE LIQUID, N.O.S. (contains OLEIC ACID, COMPOUND WITH N-(2-AMINOETHYL)ETHANE-1,2-DIAMINE)

RID
Hazard class: 8
Packing group: III
ID number: UN 1760
Hazard label: 8, EHSM
Proper shipping name: CORROSIVE LIQUID, N.O.S. (contains OLEIC ACID, COMPOUND WITH N-(2-AMINOETHYL)ETHANE-1,2-DIAMINE)



Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Inland waterway transport
ADN
Hazard class: 8
Packing group: III
ID number: UN 1760
Hazard label: 8, EHSM
Proper shipping name: CORROSIVE LIQUID, N.O.S. (contains OLEIC ACID, COMPOUND WITH N-(2-AMINOETHYL)ETHANE-1,2-DIAMINE)


Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Sea transport
IMDG
Hazard class: 8
Packing group: III
ID number: UN 1760
Hazard label: 8, EHSM
Marine pollutant: YES
Proper shipping name: CORROSIVE LIQUID, N.O.S. (contains OLEIC ACID, COMPOUND WITH N-(2-AMINOETHYL)ETHANE-1,2-DIAMINE)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:

Air transport
IATA/ICAO
Hazard class: 8
Packing group: III
ID number: UN 1760
Hazard label: 8
Proper shipping name: CORROSIVE LIQUID, N.O.S. (contains OLEIC ACID, COMPOUND WITH N-(2-AMINOETHYL)ETHANE-1,2-DIAMINE)
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

Components with workplace control parameters

none

Exposure controls
Personal protective equipment
Respiratory protection:
Suitable respiratory protection for higher concentrations or long-term effect: Gas filter for gases/vapours of organic compounds (boiling point >65 °C, e. g. EN 14387 Type A)

Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
fluoroelastomer (FKM) - 0.7 mm coating thickness
Polyethylene-Laminate (PE laminate) - ca. 0.1 mm coating thickness
Suitable materials short-term contact and/or splashes (recommended: At least protective index 2, corresponding > 30 minutes of permeation time according to EN 374)
nitrile rubber (NBR) - 0.4 mm coating thickness
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Manufacturer's directions for use should be observed because of great diversity of types.

Eye protection:
Tightly fitting safety goggles (cage goggles) (e.g. EN 166) and face shield.

Body protection:
Body protection must be chosen based on level of activity and exposure., acid- resp. lye-proof apron, e.g. of rubber (f.e. according to EN 14605), protection boots, f.e. of rubber (e.g. according to EN 20346), acid-proof chemical protection suit (f.e. according to EN 14605)

General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice.

Stability and reactivity

Disposal considerations

Waste treatment methods

Must be disposed of or incinerated in accordance with local regulations.


Contaminated packaging:
Uncontaminated packaging can be re-used.
Packs that cannot be cleaned should be disposed of in the same manner as the contents.