Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Symptoms and effects: No typical symptoms and effects known.

First aid

General: In all cases of doubt, or when symptoms persist, seek medical attention.

Inhalation: Not likely to occur. Move to fresh air, rest, half upright position, loosen clothing.

Skin: Take off contaminated clothing immediately. Wash immediately with soap and water. Launder clothes before reuse.

Eye: Rinse thoroughly with plenty of water. Eyelids should be held away from the eyeball to ensure thorough rinsing. Seek medical advice if irritation develops.

Ingestion: Rinse mouth, give water to drink.

Advice to physician: No additional information available

Fire-fighting measures

Extinguishing media: (preferably) water

Unsuitable extinguishing media: none known.

Hazardous decomposition / combustion products: Nitrous gases may be produced

Protective equipment: Use self-contained respiratory equipment.

Fire and explosion hazard: In case of fire and/or explosion do not breathe fumes.

Accidental release measures

Personal precautions:

Respiratory: In case of dust formation use dust mask. Dust exposure limits have to be respected.

Hand: For permanent (>480 minutes), full contact use, 100% nitrile gloves conforming to EN 374, e.g. KCL Dermatril 740 are recommended. If used under conditions other than given above it is recommended that a supplier of CE approved gloves is contacted. These recommendations are only applicable to the chemical as supplied by Akzo Nobel; if mixed with or dissolved in other substances please contact a supplier of CE approved gloves (e.g. KCL International +49 66 59870, fax +49 6659 87155).

Eye: The usual precautions for handling chemicals should be observed.

Skin and body: The usual precautions for handling chemicals should be observed.

Environmental precautions: Collect as much as possible in a clean container for (preferable) reuse or disposal.

Methods for cleaning up: Flush remainder with water (Absorb the remainder with e.g. vermiculite).

Handling and storage

Handling: The usual precautionary measures for handling and safety should be observed.

Fire and explosion prevention: No specific recommendations.

Storage requirements: Avoid contact with: aluminum, zinc, nickel, copper and copper alloys. Store in PVC, PP, PE, stainless steel, bituminized tanks. Keep at temperature not exceeding 40°c. The thermal stability depends on temperature and time of exposure.

Other information: Protect product from moisture and wet air. Keep container tightly closed and dry

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
1760
Shippingopen allclose all
Labels:
Corrosive to metals, tunnel code E
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
1760
Shippingopen allclose all
Labels:
Corrosive to metals
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
1760
Shipping information
Proper shipping name and description:
Corrosive liquid, n.o.s. (contains diethylenetriaminepentaacetic acid, ferric-diammonium complex)
Chemical name:
Diethylenetriaminepentaacetic acid, ferric-diammonium complex
Labels:
Corrosive to metals
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
1760
Shipping information
Proper shipping name and description:
Corrosive liquid, n.o.s. (contains diethylenetriaminepentaacetic acid, ferric-diammonium complex)
Chemical name:
not relevant
Labels:
Corrosive to metals
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Respiratory: In case of dust formation use dust mask. Dust exposure limits have to be respected.

Hand: For permanent (>480 minutes), full contact use, 100% nitrile gloves conforming to EN 374, e.g. KCL Dermatril 740 are recommended. If used under conditions other than given above it is recommended that a supplier of CE approved gloves is contacted. These recommendations are only applicable to the chemical as supplied by Akzo Nobel; if mixed with or dissolved in other substances please contact a supplier of CE approved gloves (e.g. KCL International +49 66 59870, fax +49 6659 87155).

Eye: The usual precautions for handling chemicals should be observed.

Skin and body: The usual precautions for handling chemicals should be observed.

Stability and reactivity

Keep away from: aluminum, zinc, nickel, copper and copper alloys

Disposal considerations

Product: According to local regulations.

Contaminated packaging:  No specific recommendations