Registration Dossier

Physical & Chemical properties

Flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Reliability:
1 (reliable without restriction)
Reason / purpose:
reference to same study
Qualifier:
according to
Guideline:
EU Method A.10 (Flammability (Solids))
Deviations:
no
GLP compliance:
yes
Test procedure:
burning rate test: preliminary screening test
Burning time:
> 120 s

The test substance did not ignite during the full 2 minutes of heating, therefore it is not highly flammable.

Interpretation of results:
GHS criteria not met
Conclusions:
Not highly flammable
Executive summary:

The flammability of the test substance was performed according to EC Method A.10. The test substance was formed into an unbroken strip about 250 mm long, 20 mm wide and 10 mm high on a non-combustible, non-porous, low heat conducting plate. A hot flame was applied to the end of the powder train until it ignited or for a maximum of 2 minutes. The test substance did not ignite during the full 2 minutes of heating, therefore it is not highly flammable.

Description of key information

EC Method A.10

Key value for chemical safety assessment

Flammability:
non flammable

Additional information

Justification for classification or non-classification

The test substance is not flammable and is not classified according to EU Classification, Labelling and Packaging of Substances and Mixtures (CLP) Regulation (EC) No. 1272/2008.