Registration Dossier

Administrative data

First-aid measures

General advice : Seek medical advice. If breathing has stopped or is labored, give assisted
respirations. Supplemental oxygen may be indicated. If the heart has stopped,
trained personnel should begin cardiopulmonary resuscitation immediately.
Eye contact : Hold eyelids apart, initiate and maintain gentle and continuous irrigation until the
patient receives medical care. If medical care is not promptly available, continue
to irrigate for one hour.
Skin contact : Immediately remove contaminated clothing, and any extraneous chemical, if
possible to do so without delay. Initiate and maintain continuous irrigation until
the patient receives medical care. If medical care is not promptly available,
continue to irrigate for one hour. Cover wound with sterile dressing.
Ingestion : Do not induce vomiting without medical advice. Never give anything by mouth to
an unconscious person. Prevent aspiration of vomit. Turn victim's head to the
side.
Inhalation : Move to fresh air.

Fire-fighting measures

Suitable extinguishing media : Alcohol-resistant foam. Carbon dioxide (CO2).
Dry sand.Limestone powder.
Extinguishing media which must not be used for safety reasons. :: No data available.
Special hazards arising from the substance or mixture
: Incomplete combustion may form carbon monoxide. May generate ammonia gas. May generate toxic nitrogen oxide gases. Burning produces noxious and toxic fumes. Downwind personnel must be evacuated. Advice for fire-fighters : Avoid contact with the skin. A face shield should be worn. Use personal protective equipment. Wear self contained breathing apparatus for fire fighting if necessary.
Further information : Do not allow run-off from fire fighting to enter drains or water courses., Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures : Wear suitable protective clothing, gloves and eye/face protection. Use
self-contained breathing apparatus and chemically protective clothing. Evacuate personnel to safe areas.
Environmental precautions
: Construct a dike to prevent spreading. Construct a dike to prevent spreading. Methods and material for containment and cleaning up
: Contact Air Products' Emergency Response Center for advice. Approach suspected leak areas with caution. Place in appropriate chemical waste
container. Additional advice : If possible, stop flow of product.

Handling and storage

Precautions for safe handling
Avoid contact with skin and eyes. Emergency showers and eye wash stations should be readily accessible.
Adhere to work practice rules established by government regulations. Use personal protective equipment. When using, do not eat, drink or smoke.
Conditions for safe storage, including any incompatibilities Do not store near acids. Store in steel containers preferably located outdoors, above ground, and surrounded by dikes to contain spills or leaks. Keep containers tightly closed in a dry, cool and well-ventilated place.

Transport information

Land transport (ADR/RID)

UN number:
2735
Shippingopen allclose all
Class:
8
Classification code:
C7
Packaging group:
II
Labels:
8
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
2735
Shippingopen allclose all
Class:
8
Classification code:
C7
Packaging group:
II
Labels:
8
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2735
Proper shipping name and description:
AMINES, LIQUID, CORROSIVE, N.O.S., (Aliphatic Amines)
Chemical name:
2-Propenenitrile, reaction products with ethylenediamine, hydrogenated
Class:
8
Packaging group:
II
EmS code:
F-A,S-B
Labels:
8
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
2735
Proper shipping name and description:
AMINES, LIQUID, CORROSIVE, N.O.S., (Aliphatic Amines)
Chemical name:
2-Propenenitrile, reaction products with ethylenediamine, hydrogenated
Class:
8
Packaging group:
II
Labels:
8
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment
Respiratory protection:
Wear respiratory protection if ventilation is inadequate.

Hand protection:
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374):
butyl rubber (butyl) - 0.7 mm coating thickness
Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
Manufacturer's directions for use should be observed because of great diversity of types.

Eye protection:
Tightly fitting safety goggles (splash goggles) (e.g. EN 166)

Body protection:
Protective suit

Stability and reactivity

Hazardous reactions:
Strong exothermic reaction with acids.

Disposal considerations

Contaminated packaging:
Contaminated packaging should be emptied as far as possible; then it can be passed on for recycling after being thoroughly cleaned.